lkml.org 
[lkml]   [2009]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Fix early panic issue on machines with memless node
On Wed, May 06, 2009 at 01:19:52PM +0800, Zhang, Yanmin wrote: > On Tue, 2009-05-05 at 15:27 -0500, Jack Steiner wrote:
> > On Tue, May 05, 2009 at 12:52:54PM -0700, David Rientjes wrote:
> > > On Tue, 5 May 2009, Jack Steiner wrote:
> > >
> > > > I was able to duplicate your original problem. Your patch below solves the
> > > > problem. AFAICT, it causes no new reqgressions to the various configurations
> > > > that I'm testing. (I'll add the "mem=2G" to my configs that I test).
> > > >
> > >
> > > Great, it would be helpful to catch these problems before 2.6.30 is
> > > released. I've passed my patch along to Ingo.
> > >
> > > > However, I see a new regression that was not present a couple of weeks ago.
> > > > Configurations that have nodes with cpus and no memory panic during
> > > > boot. This occurs both with and without your patch and is not related to "mem=".
> > > >
> > > > I need to isolate the problem but here is the stack trace. :
> > > > Pid: 0, comm: swapper Not tainted 2.6.30-rc4-next-20090505-medusa #12
> > > > Call Trace:
> > > > [<ffffffff806b919e>] early_idt_handler+0x5e/0x71
> > > > [<ffffffff802920fe>] ? build_zonelists_node+0x4c/0x8d
> > > > [<ffffffff8029333f>] __build_all_zonelists+0x1ae/0x55a
> > > > [<ffffffff80293932>] build_all_zonelists+0x1b5/0x263
> > > > [<ffffffff806b9b6e>] start_kernel+0x17a/0x3c5
> > > > [<ffffffff806b9140>] ? early_idt_handler+0x0/0x71
> > > > [<ffffffff806b92a7>] x86_64_start_reservations+0xae/0xb2
> > > > [<ffffffff806b93fd>] x86_64_start_kernel+0x152/0x161
> > > >
> > >
> > > Please post your .config since it apparently differs from x86_64 defconfig
> > > judging by my debugging symbols and also the full output of the panic.
> >
> > I suspect I mislead you when I mentioned "configurations". I did not mean
> > the .config file. I use a more-or-less standard .config file.
> >
> > I do much of my testing on a system simulator. Using a simulator config file,
> > I specify the system configuration such as number of nodes, sockets per node,
> > cpus per socket, memory per socket, address map, boot options, etc. This
> > makes it easy to quickly test a lot of strange (but real) configurations.
> >
> > The configuration above that is failing is a 2-socket Nehelem blade that has no
> > memory on socket 0. All memory is located on socket 1. The panic is caused by a
> > null dereference of NODE_DATA(0).
> >
> > Still looking....
> It seems in function setup_node_bootmem:
>
> if (!end)
> return;
>
> stops the initialization of node_data[nodeid]. Later on panic when build_zonelists
> dereference ???NODE_DATA(0).
>
> Although a node is memoryless, but mostly it has small blocks of memory, so function
> acpi_scan_nodes marks them offline. However, if getting node info in
> acpi_numa_processor_affinity_init. the node might have no any memory, and ???acpi_scan_nodes
> doesn't mark it offline.

How _should_ a node without memory be treated??

For example, consider a Nehelem board with:
- 2 sockets
- all memory is located on socket 1 (socket 0 has no memory)

Our BIOS currently builds the SRAT with:
- cpus in socket 0 in promimity domain 0
- cpus in socket 1 in promimity domain 1
- all memory is in promimity domain 1

Should this be a valid configuration? This is not a corner case that is
unlikely to occur. We actually have these types of configurations.


>
> The logic is confusing with patch dc09855191809. Could you revert it to retest?
>

I reverted dc09855191809. AFAICT, the results are identical.


PROM>>
PROM>> Fake PROM Config: cpus 2 (0 disabled), nodes 2, sockets 2, MB 256
PROM>> socket 0, lsocket 0, blade 0, nasid 0, mem 0, cpumap 0x1, disabled 0x0
PROM>> socket 1, lsocket 0, blade 1, nasid 4, mem 256, cpumap 0x1, disabled 0x0
PROM>>
PROM>> SGI UV X86_64 FakeProm Version 1.00. Built 14:04:20 May 1 2009
PROM>> Hub : UV
PROM>> Blades : 2
PROM>> Sockets : 2
PROM>> Cpus : 2
PROM>> disabled : 0
PROM>> Nodes : 2
PROM>> M value : 37
PROM>> N value : 7
PROM>> NodeMode : 0 (node)
PROM>> APICMode : 1 (x2apic-UV)
PROM>> efi_enabled : 1
PROM>> nasid0_present : 1
PROM>> noded0_split : 0
PROM>> Total Memory : 268435456 (256 MB)
PROM>> Superpages : 0 per-blade
PROM>> Bootline : root=/dev/hda2 init=/bin/bash console=ttyS0,38400n8 fprom lpj=10000 nohpet loglevel=8 iommu=off dma32_size=4096

PROM>> Memory Map:
PROM>> blade 0, nasid 0: 0x0 - 0x6000: socket 1, pxm 1, RAM
PROM>> blade 0, nasid 0: 0x6000 - 0xb0000: socket 1, pxm 1, CODE
PROM>> blade 0, nasid 0: 0xb0000 - 0x200000 (2MB): socket 1, pxm 1, DATA
PROM>> blade 1, nasid 4: 0x200000 (2MB) - 0x10000000 (256MB): socket 1, pxm 1, RAM
PROM>> blade 0, nasid 0: 0x80000000 (2GB) - 0x90000000 (2GB + 256MB): socket 1, pxm 1, MMIO
PROM>> blade 0, nasid 0: 0xf0000000 (3GB + 768MB) - 0xfc000000 (3GB + 960MB): socket 1, pxm 1, MMIO
PROM>> blade 0, nasid 0: 0xfed1c000 (3GB + 1005MB + 114688) - 0xfed20000 (3GB + 1005MB + 131072): socket 1, pxm 1, MMIO
PROM>> blade 0, nasid 0: 0xfff60000 (3GB + 1023MB + 393216) - 0xfff6c000 (3GB + 1023MB + 442368): socket 1, pxm 1, MMIO
PROM>> blade 0, nasid 0: 0xfe000000000 (15TB + 896GB) - 0xfe018000000 (15TB + 896GB + 384MB): socket 0, pxm 255, MMR
PROM>> MMR BASE 0xfe000000000
PROM>> GRU BASE 0xdf800000000
PROM>> M-value: 37 (128GB)
PROM>> E820 Map: 0x00000000000c12d0
PROM>> 0: 0x0 - 0x6000: type 1
PROM>> 1: 0x6000 - 0x200000 (2MB): type 2
PROM>> 2: 0x200000 (2MB) - 0x10000000 (256MB): type 1
PROM>> 3: 0x80000000 (2GB) - 0x90000000 (2GB + 256MB): type 2
PROM>> 4: 0xf0000000 (3GB + 768MB) - 0xfc000000 (3GB + 960MB): type 2
PROM>> 5: 0xfed1c000 (3GB + 1005MB + 114688) - 0xfed20000 (3GB + 1005MB + 131072): type 2
PROM>> 6: 0xfff60000 (3GB + 1023MB + 393216) - 0xfff6c000 (3GB + 1023MB + 442368): type 2
PROM>> 7: 0xfe000000000 (15TB + 896GB) - 0xfe018000000 (15TB + 896GB + 384MB): type 2
PROM>> Build ACPI tables
PROM>> RSDP at 0x00000000000e0200
PROM>> XSDT at 0x00000000000e0240
PROM>> DSDT at 0x00000000000e02a0
PROM>> MADT at 0x00000000000e02e0 (0xa0)
PROM>> sapic: cpu 0, socket 0, lcpu 0, proc_id 0x0, id 0x00, eid 0x00, apicid 0x0000,
PROM>> sapic: cpu 1, socket 1, lcpu 0, proc_id 0x1, id 0x00, eid 0x80, apicid 0x0080,
PROM>> io_apic: id 8, base 0, entries 24, prq 0, arb 0
PROM>> io_apic: id 9, base 24, entries 24, prq 1, arb 9
PROM>> lapic_nmi: acpi_id 0, flags 0x5, lint 1
PROM>> lapic_nmi: acpi_id 1, flags 0x5, lint 1
PROM>> int_src_ovr: bus 0, bus_irq 0, global_irq 2, flags 5
PROM>> int_src_ovr: bus 0, bus_irq 9, global_irq 9, flags 13
PROM>> SRAT at 0x00000000000e0380
PROM>> Memory:
PROM>> blade 0, soc 1: paddr 0x0 - 0xfff6c000 (3GB + 1023MB + 442368), pxm 1
PROM>> Processor at 00000000000e03d8:
PROM>> soc 0, lcpu 0: sapicid 0x0000, pxm 0
PROM>> soc 1, lcpu 0: sapicid 0x0080, pxm 1
PROM>> SLIT at 0x00000000000e05e0, dim 2
PROM>> 10 21
PROM>> 21 10
PROM>> FADT at 0x00000000000e06a0
PROM>> FACS at 0x00000000000e07a0
PROM>> DMAR at 0x00000000000e0860
PROM>> Memmap (EFI):
PROM>> 0000000000000000 - 0000000000006000: 24 kb, RAM (0x0 - 0x6000)
PROM>> 0000000000006000 - 00000000000b0000: 680 kb, CODE (0x6000 - 0xb0000)
PROM>> 00000000000b0000 - 0000000000200000: 1344 kb, DATA (0xb0000 - 0x200000 (2MB))
PROM>> 0000000000200000 - 0000000010000000: 254 MB, RAM (0x200000 (2MB) - 0x10000000 (256MB))
PROM>> 0000000080000000 - 0000000090000000: 256 MB, MMIO (0x80000000 (2GB) - 0x90000000 (2GB + 256MB))
PROM>> 00000000f0000000 - 00000000fc000000: 192 MB, MMIO (0xf0000000 (3GB + 768MB) - 0xfc000000 (3GB + 960MB))
PROM>> 00000000fed1c000 - 00000000fed20000: 16 kb, MMIO (0xfed1c000 (3GB + 1005MB + 114688) - 0xfed20000 (3GB + 1005MB + 131072))
PROM>> 00000000fff60000 - 00000000fff6c000: 48 kb, MMIO (0xfff60000 (3GB + 1023MB + 393216) - 0xfff6c000 (3GB + 1023MB + 442368))
PROM>> 00000fe000000000 - 00000fe018000000: 384 MB, MMR (0xfe000000000 (15TB + 896GB) - 0xfe018000000 (15TB + 896GB + 384MB))
PROM>> Total memory: 0x10000000 (268435456) bytes, 256 MB, 0 GB
PROM>> Set x2apic APICID: pcpu 0, val 0x0 -> 0x0
PROM>> init_local_mmrs: cpu 0, apicid 0x0000, nasid 0x0
PROM>> BAU GB: nasid 0, paddr 0x1e0000
PROM>> Set x2apic APICID: pcpu 1, val 0x0 -> 0x80
PROM>> init_local_mmrs: cpu 1, apicid 0x0080, nasid 0x4
PROM>> BAU GB: nasid 4, paddr 0x1e4000
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.30-rc4-next-20090505-medusa (steiner@alcatraz.americas.sgi.com) (gcc version 4.2.4) #41 SMP Wed May 6 08:21:07 CDT 2009
<6>Command line: root=/dev/hda2 init=/bin/bash console=ttyS0,38400n8 fprom lpj=10000 nohpet loglevel=8 iommu=off dma32_size=4096
<6>KERNEL supported cpus:
<6> Intel GenuineIntel
<6> AMD AuthenticAMD
<6> Centaur CentaurHauls
<6>BIOS-provided physical RAM map:
<6> BIOS-e820: 0000000000000000 - 0000000000006000 (usable)
<6> BIOS-e820: 0000000000006000 - 0000000000200000 (reserved)
<6> BIOS-e820: 0000000000200000 - 0000000010000000 (usable)
<6> BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
<6> BIOS-e820: 00000000f0000000 - 00000000fc000000 (reserved)
<6> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
<6> BIOS-e820: 00000000fff60000 - 00000000fff6c000 (reserved)
<6> BIOS-e820: 00000fe000000000 - 00000fe018000000 (reserved)
<6>EFI v1.00 by SGI
<6> ACPI 2.0=0xe0200 UVsystab=0xe08c0
<6>EFI: mem00: type=7, attr=0x8, range=[0x0000000000000000-0x0000000000006000) (0MB)
<6>EFI: mem01: type=5, attr=0x8000000000001000, range=[0x0000000000006000-0x00000000000b0000) (0MB)
<6>EFI: mem02: type=6, attr=0x8000000000000008, range=[0x00000000000b0000-0x0000000000200000) (1MB)
<6>EFI: mem03: type=7, attr=0x8, range=[0x0000000000200000-0x0000000010000000) (254MB)
<6>EFI: mem04: type=6, attr=0x8000000000000001, range=[0x0000000080000000-0x0000000090000000) (256MB)
<6>EFI: mem05: type=6, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000fc000000) (192MB)
<6>EFI: mem06: type=6, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
<6>EFI: mem07: type=6, attr=0x8000000000000001, range=[0x00000000fff60000-0x00000000fff6c000) (0MB)
<6>EFI: mem08: type=11, attr=0x8000000000000001, range=[0x00000fe000000000-0x00000fe018000000) (384MB)
<6>DMI not present or invalid.
<6>last_pfn = 0x10000 max_arch_pfn = 0x100000000
<7>MTRR default type: write-back
<7>MTRR fixed ranges enabled:
<7> 00000-FFFFF write-back
<7>MTRR variable ranges enabled:
<7> 0 base 0 F0000000 mask FFF F0000000 uncachable
<7> 1 base E0 00000000 mask FF0 00000000 uncachable
<7> 2 base F0 00000000 mask FF0 00000000 uncachable
<7> 3 base F00 00000000 mask FF0000000000 uncachable
<7> 4 disabled
<7> 5 disabled
<7> 6 disabled
<7> 7 disabled
<6>x86 PAT enabled: cpu 0, old 0x606060606060606, new 0x7010600070106
<6>x2apic enabled by BIOS, switching to x2apic ops
<6>init_memory_mapping: 0000000000000000-0000000010000000
<7> 0000000000 - 0010000000 page 2M
<7>kernel direct mapping tables up to 10000000 @ 936000-938000
<4>ACPI: RSDP 00000000000e0200 00024 (v02 )
<4>ACPI: XSDT 00000000000e0240 00054 (v01 SGI UVX 00010001 FPRM 00000001)
<4>ACPI: APIC 00000000000e02e0 00086 (v01 SGI UVX 00010001 FPRM 00000001)
<4>ACPI: SRAT 00000000000e0380 00078 (v01 SGI UVX 00010001 FPRM 00000001)
<4>ACPI: SLIT 00000000000e05e0 00030 (v01 SGI UVX 00010001 FPRM 00000001)
<4>ACPI: MCFG 00000000000e0640 0004C (v01 SGI UVX 00010001 FPRM 00000001)
<4>ACPI: FACP 00000000000e06a0 000F4 (v03 SGI UVX 00030001 FPRM 00000001)
<4>ACPI: DSDT 00000000000e02a0 00030 (v01 SGI UVX 00010001 FPRM 00000001)
<4>ACPI: FACS 00000000000e07a0 00040
<4>ACPI: DMAR 00000000000e0860 0004C (v01 SGI UVX 00010001 FPRM 00000001)
<7>ACPI: Local APIC address 0xfee00000
<6>Setting APIC routing to cluster x2apic.
<6>SRAT: PXM 0 -> APIC 0 -> Node 0
<6>SRAT: PXM 1 -> APIC 128 -> Node 1
<6>SRAT: Node 1 PXM 1 0-fff6c000
<7>NUMA: Using 63 for the hash shift.
<6>Bootmem setup node 1 0000000000000000-0000000010000000
<6> NODE_DATA [0000000000935a80 - 0000000000969a7f]
<6> bootmap [000000000096a000 - 000000000096bfff] pages 2
<6>(7 early reservations) ==> bootmem [0000000000 - 0010000000]
<6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
<6> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
<6> #2 [0000200000 - 0000935a5c] TEXT DATA BSS ==> [0000200000 - 0000935a5c]
<6> #3 [000009f000 - 00000e0900] BIOS reserved ==> [000009f000 - 00000e0900]
<6> #4 [00000e0a68 - 0000100000] BIOS reserved ==> [00000e0a68 - 0000100000]
<6> #5 [00000e0900 - 00000e0a68] EFI memmap ==> [00000e0900 - 00000e0a68]
<6> #6 [0000001000 - 0000001030] ACPI SLIT ==> [0000001000 - 0000001030]
<7> [ffffe20000000000-ffffe200003fffff] PMD -> [ffff880001200000-ffff8800015fffff] on node 1
<4>Zone PFN ranges:
<4> DMA 0x00000000 -> 0x00001000
<4> DMA32 0x00001000 -> 0x00100000
<4> Normal 0x00100000 -> 0x00100000
<4>Movable zone start PFN for each node
<4>early_node_map[2] active PFN ranges
<4> 1: 0x00000000 -> 0x00000006
<4> 1: 0x00000200 -> 0x00010000
<7>On node 1 totalpages: 65030
<7> DMA zone: 56 pages used for memmap
<7> DMA zone: 1944 pages reserved
<7> DMA zone: 1590 pages, LIFO batch:0
<7> DMA32 zone: 840 pages used for memmap
<7> DMA32 zone: 60600 pages, LIFO batch:15
<6>ACPI: PM-Timer IO Port: 0x1008
<7>ACPI: Local APIC address 0xfee00000
<6>Setting APIC routing to cluster x2apic.
<6>ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0x00] lsapic_eid[0x00] enabled)
<6>ACPI: LSAPIC (acpi_id[0x01] lsapic_id[0x00] lsapic_eid[0x80] enabled)
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
<6>ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
<6>IOAPIC[1]: apic_id 9, version 0, address 0xfec80000, GSI 24-24
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<6>Using ACPI (MADT) for SMP configuration information
<6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
<7>nr_irqs_gsi: 25
<6>PM: Registered nosave memory: 0000000000006000 - 0000000000200000
<6>Allocating PCI resources starting at 18000000 (gap: 10000000:70000000)
<6>NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:2
<6>PERCPU: Embedded 26 pages at ffff880001005000, static data 76384 bytes
<4>Pid: 0, comm: swapper Not tainted 2.6.30-rc4-next-20090505-medusa #41
<4>Call Trace:
<4> [<ffffffff806b919e>] early_idt_handler+0x5e/0x71
<4> [<ffffffff802920e1>] ? build_zonelists_node+0x2f/0x70
<4> [<ffffffff80232241>] ? __node_distance+0x59/0x70
<4> [<ffffffff80293322>] __build_all_zonelists+0x1ae/0x55a
<4> [<ffffffff80293915>] build_all_zonelists+0x1b5/0x263
<4> [<ffffffff806b9b6e>] start_kernel+0x17a/0x3c5
<4> [<ffffffff806b9140>] ? early_idt_handler+0x0/0x71
<4> [<ffffffff806b92a7>] x86_64_start_reservations+0xae/0xb2
<4> [<ffffffff806b93fd>] x86_64_start_kernel+0x152/0x161
<4>RIP build_zonelists_node+0x2f/0x70


\
 
 \ /
  Last update: 2009-05-06 16:41    [W:0.057 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site