lkml.org 
[lkml]   [2009]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] regulator/max1586: fix V3 gain calculation integer overflow
From
Date
On Thu, 2009-05-28 at 22:36 +0200, Robert Jarzmik wrote:
> Philipp Zabel <philipp.zabel@gmail.com> writes:
>
> > On Thu, May 28, 2009 at 10:59 AM, Mark Brown <broonie@opensource.wolfsonmicro.com> wrote:
> >> On Thu, May 28, 2009 at 07:15:16AM +0200, Philipp Zabel wrote:
> >>> The V3 regulator can be configured with an external resistor
> >>> connected to the feedback pin (R24 in the data sheet) to
> >>> increase the voltage range.
> >>>
> >>> For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum
> >>> V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency.
> >>>
> >>> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
> >>
> >> Looks good.
> >>
> >> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> >
> > Thanks, but it turns out I hit a 32 bit integer overflow in
> > the gain calculation. I'd like to mend that with the following
> > patch. Now max_uV could be increased up to 4.294 V, enough to
> > charge LiPo cells.
> >
> > Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
> OK.
>
> With that one melt into the previous one, have my :
> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
>
> Would you submit that to Liam or Mark for queuing into the regulator patch queue ?
>

Both patches now applied.

Thanks

Liam




\
 
 \ /
  Last update: 2009-05-29 11:07    [W:0.037 / U:3.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site