lkml.org 
[lkml]   [2009]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] readahead:add blk_run_backing_dev

At 11:09 09/05/27, Wu Fengguang wrote:
>On Wed, May 27, 2009 at 08:25:04AM +0800, Hisashi Hifumi wrote:
>>
>> At 08:42 09/05/27, Andrew Morton wrote:
>> >On Fri, 22 May 2009 10:33:23 +0800
>> >Wu Fengguang <fengguang.wu@intel.com> wrote:
>> >
>> >> > I tested above patch, and I got same performance number.
>> >> > I wonder why if (PageUptodate(page)) check is there...
>> >>
>> >> Thanks! This is an interesting micro timing behavior that
>> >> demands some research work. The above check is to confirm if it's
>> >> the PageUptodate() case that makes the difference. So why that case
>> >> happens so frequently so as to impact the performance? Will it also
>> >> happen in NFS?
>> >>
>> >> The problem is readahead IO pipeline is not running smoothly, which is
>> >> undesirable and not well understood for now.
>> >
>> >The patch causes a remarkably large performance increase. A 9%
>> >reduction in time for a linear read? I'd be surprised if the workload
>>
>> Hi Andrew.
>> Yes, I tested this with dd.
>>
>> >even consumed 9% of a CPU, so where on earth has the kernel gone to?
>> >
>> >Have you been able to reproduce this in your testing?
>>
>> Yes, this test on my environment is reproducible.
>
>Hisashi, does your environment have some special configurations?

Hi.
My testing environment is as follows:
Hardware: HP DL580
CPU:Xeon 3.2GHz *4 HT enabled
Memory:8GB
Storage: Dothill SANNet2 FC (7Disks RAID-0 Array)

I did dd to this disk-array and got improved performance number.

I noticed that when a disk is just one HDD, performance improvement
is very small.

Thanks.






\
 
 \ /
  Last update: 2009-05-27 04:29    [W:0.086 / U:1.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site