lkml.org 
[lkml]   [2009]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/1] MFD: Add U300 AB3100 core support v5
Hi Linus,

On Thu, May 21, 2009 at 11:17:06PM +0200, Linus Walleij wrote:
> This adds a core driver for the AB3100 mixed-signal circuit
> found in the ST-Ericsson U300 series platforms. This driver
> is a singleton proxy for all accesses to the AB3100
> sub-drivers which will be merged on top of this one, RTC,
> regulators, battery and system power control, vibrator,
> LEDs, and an ALSA codec.
I'm happy with this one, thanks a lot.
Applied to my for-next branch.

Cheers,
Samuel.


> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
> Reviewed-by: Mike Rapoport <mike@compulab.co.il>
> Reviewed-by: Samuel Ortiz <sameo@linux.intel.com>
> Reviewed-by: Ben Dooks <ben-linux@fluff.org>
> ---
> drivers/mfd/Kconfig | 14 +
> drivers/mfd/Makefile | 3 +-
> drivers/mfd/ab3100-core.c | 991 ++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/ab3100.h | 103 +++++
> 4 files changed, 1110 insertions(+), 1 deletions(-)
> create mode 100755 drivers/mfd/ab3100-core.c
> create mode 100644 include/linux/mfd/ab3100.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index ee3927a..61f0346 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -241,6 +241,20 @@ config PCF50633_GPIO
> Say yes here if you want to include support GPIO for pins on
> the PCF50633 chip.
>
> +config AB3100_CORE
> + tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
> + depends on I2C
> + default y if ARCH_U300
> + help
> + Select this to enable the AB3100 Mixed Signal IC core
> + functionality. This connects to a AB3100 on the I2C bus
> + and expose a number of symbols needed for dependent devices
> + to read and write registers and subscribe to events from
> + this multi-functional IC. This is needed to use other features
> + of the AB3100 such as battery-backed RTC, charging control,
> + LEDs, vibrator, system power and temperature, power management
> + and ALSA sound.
> +
> endmenu
>
> menu "Multimedia Capabilities Port drivers"
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 3afb519..f5f3371 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -40,4 +40,5 @@ obj-$(CONFIG_PMIC_DA903X) += da903x.o
>
> obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o
> obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
> -obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
> \ No newline at end of file
> +obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
> +obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
> diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
> new file mode 100755
> index 0000000..13e7d7b
> --- /dev/null
> +++ b/drivers/mfd/ab3100-core.c
> @@ -0,0 +1,991 @@
> +/*
> + * Copyright (C) 2007-2009 ST-Ericsson
> + * License terms: GNU General Public License (GPL) version 2
> + * Low-level core for exclusive access to the AB3100 IC on the I2C bus
> + * and some basic chip-configuration.
> + * Author: Linus Walleij <linus.walleij@stericsson.com>
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/mutex.h>
> +#include <linux/list.h>
> +#include <linux/notifier.h>
> +#include <linux/err.h>
> +#include <linux/platform_device.h>
> +#include <linux/device.h>
> +#include <linux/interrupt.h>
> +#include <linux/workqueue.h>
> +#include <linux/debugfs.h>
> +#include <linux/seq_file.h>
> +#include <linux/uaccess.h>
> +#include <linux/mfd/ab3100.h>
> +
> +/* These are the only registers inside AB3100 used in this main file */
> +
> +/* Interrupt event registers */
> +#define AB3100_EVENTA1 0x21
> +#define AB3100_EVENTA2 0x22
> +#define AB3100_EVENTA3 0x23
> +
> +/* AB3100 DAC converter registers */
> +#define AB3100_DIS 0x00
> +#define AB3100_D0C 0x01
> +#define AB3100_D1C 0x02
> +#define AB3100_D2C 0x03
> +#define AB3100_D3C 0x04
> +
> +/* Chip ID register */
> +#define AB3100_CID 0x20
> +
> +/* AB3100 interrupt registers */
> +#define AB3100_IMRA1 0x24
> +#define AB3100_IMRA2 0x25
> +#define AB3100_IMRA3 0x26
> +#define AB3100_IMRB1 0x2B
> +#define AB3100_IMRB2 0x2C
> +#define AB3100_IMRB3 0x2D
> +
> +/* System Power Monitoring and control registers */
> +#define AB3100_MCA 0x2E
> +#define AB3100_MCB 0x2F
> +
> +/* SIM power up */
> +#define AB3100_SUP 0x50
> +
> +/*
> + * I2C communication
> + *
> + * The AB3100 is usually assigned address 0x48 (7-bit)
> + * The chip is defined in the platform i2c_board_data section.
> + */
> +static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
> +I2C_CLIENT_INSMOD_1(ab3100);
> +
> +u8 ab3100_get_chip_type(struct ab3100 *ab3100)
> +{
> + u8 chip = ABUNKNOWN;
> +
> + switch (ab3100->chip_id & 0xf0) {
> + case 0xa0:
> + chip = AB3000;
> + break;
> + case 0xc0:
> + chip = AB3100;
> + break;
> + }
> + return chip;
> +}
> +EXPORT_SYMBOL(ab3100_get_chip_type);
> +
> +int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
> +{
> + u8 regandval[2] = {reg, regval};
> + int err;
> +
> + err = mutex_lock_interruptible(&ab3100->access_mutex);
> + if (err)
> + return err;
> +
> + /*
> + * A two-byte write message with the first byte containing the register
> + * number and the second byte containing the value to be written
> + * effectively sets a register in the AB3100.
> + */
> + err = i2c_master_send(ab3100->i2c_client, regandval, 2);
> + if (err < 0) {
> + dev_err(ab3100->dev,
> + "write error (write register): %d\n",
> + err);
> + } else if (err != 2) {
> + dev_err(ab3100->dev,
> + "write error (write register) "
> + "%d bytes transferred (expected 2)\n",
> + err);
> + err = -EIO;
> + } else {
> + /* All is well */
> + err = 0;
> + }
> + mutex_unlock(&ab3100->access_mutex);
> + return 0;
> +}
> +EXPORT_SYMBOL(ab3100_set_register);
> +
> +/*
> + * The test registers exist at an I2C bus address up one
> + * from the ordinary base. They are not supposed to be used
> + * in production code, but sometimes you have to do that
> + * anyway. It's currently only used from this file so declare
> + * it static and do not export.
> + */
> +static int ab3100_set_test_register(struct ab3100 *ab3100,
> + u8 reg, u8 regval)
> +{
> + u8 regandval[2] = {reg, regval};
> + int err;
> +
> + err = mutex_lock_interruptible(&ab3100->access_mutex);
> + if (err)
> + return err;
> +
> + err = i2c_master_send(ab3100->testreg_client, regandval, 2);
> + if (err < 0) {
> + dev_err(ab3100->dev,
> + "write error (write test register): %d\n",
> + err);
> + } else if (err != 2) {
> + dev_err(ab3100->dev,
> + "write error (write test register) "
> + "%d bytes transferred (expected 2)\n",
> + err);
> + err = -EIO;
> + } else {
> + /* All is well */
> + err = 0;
> + }
> + mutex_unlock(&ab3100->access_mutex);
> +
> + return err;
> +}
> +
> +int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
> +{
> + int err;
> +
> + err = mutex_lock_interruptible(&ab3100->access_mutex);
> + if (err)
> + return err;
> +
> + /*
> + * AB3100 require an I2C "stop" command between each message, else
> + * it will not work. The only way of achieveing this with the
> + * message transport layer is to send the read and write messages
> + * separately.
> + */
> + err = i2c_master_send(ab3100->i2c_client, &reg, 1);
> + if (err < 0) {
> + dev_err(ab3100->dev,
> + "write error (send register address): %d\n",
> + err);
> + goto get_reg_out_unlock;
> + } else if (err != 1) {
> + dev_err(ab3100->dev,
> + "write error (send register address) "
> + "%d bytes transferred (expected 1)\n",
> + err);
> + err = -EIO;
> + goto get_reg_out_unlock;
> + } else {
> + /* All is well */
> + err = 0;
> + }
> +
> + err = i2c_master_recv(ab3100->i2c_client, regval, 1);
> + if (err < 0) {
> + dev_err(ab3100->dev,
> + "write error (read register): %d\n",
> + err);
> + goto get_reg_out_unlock;
> + } else if (err != 1) {
> + dev_err(ab3100->dev,
> + "write error (read register) "
> + "%d bytes transferred (expected 1)\n",
> + err);
> + err = -EIO;
> + goto get_reg_out_unlock;
> + } else {
> + /* All is well */
> + err = 0;
> + }
> +
> + get_reg_out_unlock:
> + mutex_unlock(&ab3100->access_mutex);
> + return err;
> +}
> +EXPORT_SYMBOL(ab3100_get_register);
> +
> +int ab3100_get_register_page(struct ab3100 *ab3100,
> + u8 first_reg, u8 *regvals, u8 numregs)
> +{
> + int err;
> +
> + if (ab3100->chip_id == 0xa0 ||
> + ab3100->chip_id == 0xa1)
> + /* These don't support paged reads */
> + return -EIO;
> +
> + err = mutex_lock_interruptible(&ab3100->access_mutex);
> + if (err)
> + return err;
> +
> + /*
> + * Paged read also require an I2C "stop" command.
> + */
> + err = i2c_master_send(ab3100->i2c_client, &first_reg, 1);
> + if (err < 0) {
> + dev_err(ab3100->dev,
> + "write error (send first register address): %d\n",
> + err);
> + goto get_reg_page_out_unlock;
> + } else if (err != 1) {
> + dev_err(ab3100->dev,
> + "write error (send first register address) "
> + "%d bytes transferred (expected 1)\n",
> + err);
> + err = -EIO;
> + goto get_reg_page_out_unlock;
> + }
> +
> + err = i2c_master_recv(ab3100->i2c_client, regvals, numregs);
> + if (err < 0) {
> + dev_err(ab3100->dev,
> + "write error (read register page): %d\n",
> + err);
> + goto get_reg_page_out_unlock;
> + } else if (err != numregs) {
> + dev_err(ab3100->dev,
> + "write error (read register page) "
> + "%d bytes transferred (expected %d)\n",
> + err, numregs);
> + err = -EIO;
> + goto get_reg_page_out_unlock;
> + }
> +
> + /* All is well */
> + err = 0;
> +
> + get_reg_page_out_unlock:
> + mutex_unlock(&ab3100->access_mutex);
> + return err;
> +}
> +EXPORT_SYMBOL(ab3100_get_register_page);
> +
> +int ab3100_mask_and_set_register(struct ab3100 *ab3100,
> + u8 reg, u8 andmask, u8 ormask)
> +{
> + u8 regandval[2] = {reg, 0};
> + int err;
> +
> + err = mutex_lock_interruptible(&ab3100->access_mutex);
> + if (err)
> + return err;
> +
> + /* First read out the target register */
> + err = i2c_master_send(ab3100->i2c_client, &reg, 1);
> + if (err < 0) {
> + dev_err(ab3100->dev,
> + "write error (maskset send address): %d\n",
> + err);
> + goto get_maskset_unlock;
> + } else if (err != 1) {
> + dev_err(ab3100->dev,
> + "write error (maskset send address) "
> + "%d bytes transferred (expected 1)\n",
> + err);
> + err = -EIO;
> + goto get_maskset_unlock;
> + }
> +
> + err = i2c_master_recv(ab3100->i2c_client, &regandval[1], 1);
> + if (err < 0) {
> + dev_err(ab3100->dev,
> + "write error (maskset read register): %d\n",
> + err);
> + goto get_maskset_unlock;
> + } else if (err != 1) {
> + dev_err(ab3100->dev,
> + "write error (maskset read register) "
> + "%d bytes transferred (expected 1)\n",
> + err);
> + err = -EIO;
> + goto get_maskset_unlock;
> + }
> +
> + /* Modify the register */
> + regandval[1] &= andmask;
> + regandval[1] |= ormask;
> +
> + /* Write the register */
> + err = i2c_master_send(ab3100->i2c_client, regandval, 2);
> + if (err < 0) {
> + dev_err(ab3100->dev,
> + "write error (write register): %d\n",
> + err);
> + goto get_maskset_unlock;
> + } else if (err != 2) {
> + dev_err(ab3100->dev,
> + "write error (write register) "
> + "%d bytes transferred (expected 2)\n",
> + err);
> + err = -EIO;
> + goto get_maskset_unlock;
> + }
> +
> + /* All is well */
> + err = 0;
> +
> + get_maskset_unlock:
> + mutex_unlock(&ab3100->access_mutex);
> + return err;
> +}
> +EXPORT_SYMBOL(ab3100_mask_and_set_register);
> +
> +/*
> + * Register a simple callback for handling any AB3100 events.
> + */
> +int ab3100_event_register(struct ab3100 *ab3100,
> + struct notifier_block *nb)
> +{
> + return blocking_notifier_chain_register(&ab3100->event_subscribers,
> + nb);
> +}
> +EXPORT_SYMBOL(ab3100_event_register);
> +
> +/*
> + * Remove a previously registered callback.
> + */
> +int ab3100_event_unregister(struct ab3100 *ab3100,
> + struct notifier_block *nb)
> +{
> + return blocking_notifier_chain_unregister(&ab3100->event_subscribers,
> + nb);
> +}
> +EXPORT_SYMBOL(ab3100_event_unregister);
> +
> +
> +int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
> + u32 *fatevent)
> +{
> + if (!ab3100->startup_events_read)
> + return -EAGAIN; /* Try again later */
> + *fatevent = ab3100->startup_events;
> + return 0;
> +}
> +EXPORT_SYMBOL(ab3100_event_registers_startup_state_get);
> +
> +/* Interrupt handling worker */
> +static void ab3100_work(struct work_struct *work)
> +{
> + struct ab3100 *ab3100 = container_of(work, struct ab3100, work);
> + u8 event_regs[3];
> + u32 fatevent;
> + int err;
> +
> + err = ab3100_get_register_page(ab3100, AB3100_EVENTA1,
> + event_regs, 3);
> + if (err)
> + goto err_event_wq;
> +
> + fatevent = (event_regs[0] << 16) |
> + (event_regs[1] << 8) |
> + event_regs[2];
> +
> + if (!ab3100->startup_events_read) {
> + ab3100->startup_events = fatevent;
> + ab3100->startup_events_read = true;
> + }
> + /*
> + * The notified parties will have to mask out the events
> + * they're interested in and react to them. They will be
> + * notified on all events, then they use the fatevent value
> + * to determine if they're interested.
> + */
> + blocking_notifier_call_chain(&ab3100->event_subscribers,
> + fatevent, NULL);
> +
> + dev_dbg(ab3100->dev,
> + "IRQ Event: 0x%08x\n", fatevent);
> +
> + /* By now the IRQ should be acked and deasserted so enable it again */
> + enable_irq(ab3100->i2c_client->irq);
> + return;
> +
> + err_event_wq:
> + dev_dbg(ab3100->dev,
> + "error in event workqueue\n");
> + /* Enable the IRQ anyway, what choice do we have? */
> + enable_irq(ab3100->i2c_client->irq);
> + return;
> +}
> +
> +static irqreturn_t ab3100_irq_handler(int irq, void *data)
> +{
> + struct ab3100 *ab3100 = data;
> + /*
> + * Disable the IRQ and dispatch a worker to handle the
> + * event. Since the chip resides on I2C this is slow
> + * stuff and we will re-enable the interrupts once th
> + * worker has finished.
> + */
> + disable_irq(ab3100->i2c_client->irq);
> + schedule_work(&ab3100->work);
> + return IRQ_HANDLED;
> +}
> +
> +#ifdef CONFIG_DEBUG_FS
> +/*
> + * Some debugfs entries only exposed if we're using debug
> + */
> +static int ab3100_registers_print(struct seq_file *s, void *p)
> +{
> + struct ab3100 *ab3100 = s->private;
> + u8 value;
> + u8 reg;
> +
> + seq_printf(s, "AB3100 registers:\n");
> +
> + for (reg = 0; reg < 0xff; reg++) {
> + ab3100_get_register(ab3100, reg, &value);
> + seq_printf(s, "[0x%x]: 0x%x\n", reg, value);
> + }
> + return 0;
> +}
> +
> +static int ab3100_registers_open(struct inode *inode, struct file *file)
> +{
> + return single_open(file, ab3100_registers_print, inode->i_private);
> +}
> +
> +static const struct file_operations ab3100_registers_fops = {
> + .open = ab3100_registers_open,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = single_release,
> + .owner = THIS_MODULE,
> +};
> +
> +struct ab3100_get_set_reg_priv {
> + struct ab3100 *ab3100;
> + bool mode;
> +};
> +
> +static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file)
> +{
> + file->private_data = inode->i_private;
> + return 0;
> +}
> +
> +static int ab3100_get_set_reg(struct file *file,
> + const char __user *user_buf,
> + size_t count, loff_t *ppos)
> +{
> + struct ab3100_get_set_reg_priv *priv = file->private_data;
> + struct ab3100 *ab3100 = priv->ab3100;
> + char buf[32];
> + int buf_size;
> + int regp;
> + unsigned long user_reg;
> + int err;
> + int i = 0;
> +
> + /* Get userspace string and assure termination */
> + buf_size = min(count, (sizeof(buf)-1));
> + if (copy_from_user(buf, user_buf, buf_size))
> + return -EFAULT;
> + buf[buf_size] = 0;
> +
> + /*
> + * The idea is here to parse a string which is either
> + * "0xnn" for reading a register, or "0xaa 0xbb" for
> + * writing 0xbb to the register 0xaa. First move past
> + * whitespace and then begin to parse the register.
> + */
> + while ((i < buf_size) && (buf[i] == ' '))
> + i++;
> + regp = i;
> +
> + /*
> + * Advance pointer to end of string then terminate
> + * the register string. This is needed to satisfy
> + * the strict_strtoul() function.
> + */
> + while ((i < buf_size) && (buf[i] != ' '))
> + i++;
> + buf[i] = '\0';
> +
> + err = strict_strtoul(&buf[regp], 16, &user_reg);
> + if (err)
> + return err;
> + if (user_reg > 0xff)
> + return -EINVAL;
> +
> + /* Either we read or we write a register here */
> + if (!priv->mode) {
> + /* Reading */
> + u8 reg = (u8) user_reg;
> + u8 regvalue;
> +
> + ab3100_get_register(ab3100, reg, &regvalue);
> +
> + dev_info(ab3100->dev,
> + "debug read AB3100 reg[0x%02x]: 0x%02x\n",
> + reg, regvalue);
> + } else {
> + int valp;
> + unsigned long user_value;
> + u8 reg = (u8) user_reg;
> + u8 value;
> + u8 regvalue;
> +
> + /*
> + * Writing, we need some value to write to
> + * the register so keep parsing the string
> + * from userspace.
> + */
> + i++;
> + while ((i < buf_size) && (buf[i] == ' '))
> + i++;
> + valp = i;
> + while ((i < buf_size) && (buf[i] != ' '))
> + i++;
> + buf[i] = '\0';
> +
> + err = strict_strtoul(&buf[valp], 16, &user_value);
> + if (err)
> + return err;
> + if (user_reg > 0xff)
> + return -EINVAL;
> +
> + value = (u8) user_value;
> + ab3100_set_register(ab3100, reg, value);
> + ab3100_get_register(ab3100, reg, &regvalue);
> +
> + dev_info(ab3100->dev,
> + "debug write reg[0x%02x] with 0x%02x, "
> + "after readback: 0x%02x\n",
> + reg, value, regvalue);
> + }
> + return buf_size;
> +}
> +
> +static const struct file_operations ab3100_get_set_reg_fops = {
> + .open = ab3100_get_set_reg_open_file,
> + .write = ab3100_get_set_reg,
> +};
> +
> +static struct dentry *ab3100_dir;
> +static struct dentry *ab3100_reg_file;
> +static struct ab3100_get_set_reg_priv ab3100_get_priv;
> +static struct dentry *ab3100_get_reg_file;
> +static struct ab3100_get_set_reg_priv ab3100_set_priv;
> +static struct dentry *ab3100_set_reg_file;
> +
> +static void ab3100_setup_debugfs(struct ab3100 *ab3100)
> +{
> + int err;
> +
> + ab3100_dir = debugfs_create_dir("ab3100", NULL);
> + if (!ab3100_dir)
> + goto exit_no_debugfs;
> +
> + ab3100_reg_file = debugfs_create_file("registers",
> + S_IRUGO, ab3100_dir, ab3100,
> + &ab3100_registers_fops);
> + if (!ab3100_reg_file) {
> + err = -ENOMEM;
> + goto exit_destroy_dir;
> + }
> +
> + ab3100_get_priv.ab3100 = ab3100;
> + ab3100_get_priv.mode = false;
> + ab3100_get_reg_file = debugfs_create_file("get_reg",
> + S_IWUGO, ab3100_dir, &ab3100_get_priv,
> + &ab3100_get_set_reg_fops);
> + if (!ab3100_get_reg_file) {
> + err = -ENOMEM;
> + goto exit_destroy_reg;
> + }
> +
> + ab3100_set_priv.ab3100 = ab3100;
> + ab3100_set_priv.mode = true;
> + ab3100_set_reg_file = debugfs_create_file("set_reg",
> + S_IWUGO, ab3100_dir, &ab3100_set_priv,
> + &ab3100_get_set_reg_fops);
> + if (!ab3100_set_reg_file) {
> + err = -ENOMEM;
> + goto exit_destroy_get_reg;
> + }
> + return;
> +
> + exit_destroy_get_reg:
> + debugfs_remove(ab3100_get_reg_file);
> + exit_destroy_reg:
> + debugfs_remove(ab3100_reg_file);
> + exit_destroy_dir:
> + debugfs_remove(ab3100_dir);
> + exit_no_debugfs:
> + return;
> +}
> +static inline void ab3100_remove_debugfs(void)
> +{
> + debugfs_remove(ab3100_set_reg_file);
> + debugfs_remove(ab3100_get_reg_file);
> + debugfs_remove(ab3100_reg_file);
> + debugfs_remove(ab3100_dir);
> +}
> +#else
> +static inline void ab3100_setup_debugfs(struct ab3100 *ab3100)
> +{
> +}
> +static inline void ab3100_remove_debugfs(void)
> +{
> +}
> +#endif
> +
> +/*
> + * Basic set-up, datastructure creation/destruction and I2C interface.
> + * This sets up a default config in the AB3100 chip so that it
> + * will work as expected.
> + */
> +
> +struct ab3100_init_setting {
> + u8 abreg;
> + u8 setting;
> +};
> +
> +static const struct ab3100_init_setting __initdata
> +ab3100_init_settings[] = {
> + {
> + .abreg = AB3100_MCA,
> + .setting = 0x01
> + }, {
> + .abreg = AB3100_MCB,
> + .setting = 0x30
> + }, {
> + .abreg = AB3100_IMRA1,
> + .setting = 0x00
> + }, {
> + .abreg = AB3100_IMRA2,
> + .setting = 0xFF
> + }, {
> + .abreg = AB3100_IMRA3,
> + .setting = 0x01
> + }, {
> + .abreg = AB3100_IMRB1,
> + .setting = 0xFF
> + }, {
> + .abreg = AB3100_IMRB2,
> + .setting = 0xFF
> + }, {
> + .abreg = AB3100_IMRB3,
> + .setting = 0xFF
> + }, {
> + .abreg = AB3100_SUP,
> + .setting = 0x00
> + }, {
> + .abreg = AB3100_DIS,
> + .setting = 0xF0
> + }, {
> + .abreg = AB3100_D0C,
> + .setting = 0x00
> + }, {
> + .abreg = AB3100_D1C,
> + .setting = 0x00
> + }, {
> + .abreg = AB3100_D2C,
> + .setting = 0x00
> + }, {
> + .abreg = AB3100_D3C,
> + .setting = 0x00
> + },
> +};
> +
> +static int __init ab3100_setup(struct ab3100 *ab3100)
> +{
> + int err = 0;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
> + err = ab3100_set_register(ab3100,
> + ab3100_init_settings[i].abreg,
> + ab3100_init_settings[i].setting);
> + if (err)
> + goto exit_no_setup;
> + }
> +
> + /*
> + * Special trick to make the AB3100 use the 32kHz clock (RTC)
> + * bit 3 in test registe 0x02 is a special, undocumented test
> + * register bit that only exist in AB3100 P1E
> + */
> + if (ab3100->chip_id == 0xc4) {
> + dev_warn(ab3100->dev,
> + "AB3100 P1E variant detected, "
> + "forcing chip to 32KHz\n");
> + err = ab3100_set_test_register(ab3100, 0x02, 0x08);
> + }
> +
> + exit_no_setup:
> + return err;
> +}
> +
> +/*
> + * Here we define all the platform devices that appear
> + * as children of the AB3100. These are regular platform
> + * devices with the IORESOURCE_IO .start and .end set
> + * to correspond to the internal AB3100 register range
> + * mapping to the corresponding subdevice.
> + */
> +
> +#define AB3100_DEVICE(devname, devid) \
> +static struct platform_device ab3100_##devname##_device = { \
> + .name = devid, \
> + .id = -1, \
> +}
> +
> +/*
> + * This lists all the subdevices and corresponding register
> + * ranges.
> + */
> +AB3100_DEVICE(dac, "ab3100-dac");
> +AB3100_DEVICE(leds, "ab3100-leds");
> +AB3100_DEVICE(power, "ab3100-power");
> +AB3100_DEVICE(regulators, "ab3100-regulators");
> +AB3100_DEVICE(sim, "ab3100-sim");
> +AB3100_DEVICE(uart, "ab3100-uart");
> +AB3100_DEVICE(rtc, "ab3100-rtc");
> +AB3100_DEVICE(charger, "ab3100-charger");
> +AB3100_DEVICE(boost, "ab3100-boost");
> +AB3100_DEVICE(adc, "ab3100-adc");
> +AB3100_DEVICE(fuelgauge, "ab3100-fuelgauge");
> +AB3100_DEVICE(vibrator, "ab3100-vibrator");
> +AB3100_DEVICE(otp, "ab3100-otp");
> +AB3100_DEVICE(codec, "ab3100-codec");
> +
> +static struct platform_device *
> +ab3100_platform_devs[] = {
> + &ab3100_dac_device,
> + &ab3100_leds_device,
> + &ab3100_power_device,
> + &ab3100_regulators_device,
> + &ab3100_sim_device,
> + &ab3100_uart_device,
> + &ab3100_rtc_device,
> + &ab3100_charger_device,
> + &ab3100_boost_device,
> + &ab3100_adc_device,
> + &ab3100_fuelgauge_device,
> + &ab3100_vibrator_device,
> + &ab3100_otp_device,
> + &ab3100_codec_device,
> +};
> +
> +struct ab_family_id {
> + u8 id;
> + char *name;
> +};
> +
> +static const struct ab_family_id ids[] __initdata = {
> + /* AB3100 */
> + {
> + .id = 0xc0,
> + .name = "P1A"
> + }, {
> + .id = 0xc1,
> + .name = "P1B"
> + }, {
> + .id = 0xc2,
> + .name = "P1C"
> + }, {
> + .id = 0xc3,
> + .name = "P1D"
> + }, {
> + .id = 0xc4,
> + .name = "P1E"
> + }, {
> + .id = 0xc5,
> + .name = "P1F/R1A"
> + }, {
> + .id = 0xc6,
> + .name = "P1G/R1A"
> + }, {
> + .id = 0xc7,
> + .name = "P2A/R2A"
> + }, {
> + .id = 0xc8,
> + .name = "P2B/R2B"
> + },
> + /* AB3000 variants, not supported */
> + {
> + .id = 0xa0
> + }, {
> + .id = 0xa1
> + }, {
> + .id = 0xa2
> + }, {
> + .id = 0xa3
> + }, {
> + .id = 0xa4
> + }, {
> + .id = 0xa5
> + }, {
> + .id = 0xa6
> + }, {
> + .id = 0xa7
> + },
> + /* Terminator */
> + {
> + .id = 0x00,
> + },
> +};
> +
> +static int __init ab3100_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct ab3100 *ab3100;
> + int err;
> + int i;
> +
> + ab3100 = kzalloc(sizeof(struct ab3100), GFP_KERNEL);
> + if (!ab3100) {
> + dev_err(&client->dev, "could not allocate AB3100 device\n");
> + return -ENOMEM;
> + }
> +
> + /* Initialize data structure */
> + mutex_init(&ab3100->access_mutex);
> + BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers);
> +
> + ab3100->i2c_client = client;
> + ab3100->dev = &ab3100->i2c_client->dev;
> +
> + i2c_set_clientdata(client, ab3100);
> +
> + /* Read chip ID register */
> + err = ab3100_get_register(ab3100, AB3100_CID,
> + &ab3100->chip_id);
> + if (err) {
> + dev_err(&client->dev,
> + "could not communicate with the AB3100 analog "
> + "baseband chip\n");
> + goto exit_no_detect;
> + }
> +
> + for (i = 0; ids[i].id != 0x0; i++) {
> + if (ids[i].id == ab3100->chip_id) {
> + if (ids[i].name != NULL) {
> + snprintf(&ab3100->chip_name[0],
> + sizeof(ab3100->chip_name) - 1,
> + "AB3100 %s",
> + ids[i].name);
> + break;
> + } else {
> + dev_err(&client->dev,
> + "AB3000 is not supported\n");
> + goto exit_no_detect;
> + }
> + }
> + }
> +
> + if (ids[i].id == 0x0) {
> + dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
> + ab3100->chip_id);
> + dev_err(&client->dev, "accepting it anyway. Please update "
> + "the driver.\n");
> + goto exit_no_detect;
> + }
> +
> + dev_info(&client->dev, "Detected chip: %s\n",
> + &ab3100->chip_name[0]);
> +
> + /* Attach a second dummy i2c_client to the test register address */
> + ab3100->testreg_client = i2c_new_dummy(client->adapter,
> + client->addr + 1);
> + if (!ab3100->testreg_client) {
> + err = -ENOMEM;
> + goto exit_no_testreg_client;
> + }
> +
> + strlcpy(ab3100->testreg_client->name, id->name,
> + sizeof(ab3100->testreg_client->name));
> +
> + err = ab3100_setup(ab3100);
> + if (err)
> + goto exit_no_setup;
> +
> + INIT_WORK(&ab3100->work, ab3100_work);
> +
> + /* This real unpredictable IRQ is of course sampled for entropy */
> + err = request_irq(client->irq, ab3100_irq_handler,
> + IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
> + "AB3100 IRQ", ab3100);
> + if (err)
> + goto exit_no_irq;
> +
> + /* Set parent and a pointer back to the container in device data */
> + for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
> + ab3100_platform_devs[i]->dev.parent =
> + &client->dev;
> + platform_set_drvdata(ab3100_platform_devs[i], ab3100);
> + }
> +
> + /* Register the platform devices */
> + platform_add_devices(ab3100_platform_devs,
> + ARRAY_SIZE(ab3100_platform_devs));
> +
> + ab3100_setup_debugfs(ab3100);
> +
> + return 0;
> +
> + exit_no_irq:
> + exit_no_setup:
> + i2c_unregister_device(ab3100->testreg_client);
> + exit_no_testreg_client:
> + exit_no_detect:
> + kfree(ab3100);
> + return err;
> +}
> +
> +static int __exit ab3100_remove(struct i2c_client *client)
> +{
> + struct ab3100 *ab3100 = i2c_get_clientdata(client);
> + int i;
> +
> + /* Unregister subdevices */
> + for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++)
> + platform_device_unregister(ab3100_platform_devs[i]);
> +
> + ab3100_remove_debugfs();
> + i2c_unregister_device(ab3100->testreg_client);
> +
> + /*
> + * At this point, all subscribers should have unregistered
> + * their notifiers so deactivate IRQ
> + */
> + free_irq(client->irq, ab3100);
> + kfree(ab3100);
> + return 0;
> +}
> +
> +static const struct i2c_device_id ab3100_id[] = {
> + { "ab3100", ab3100 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, ab3100_id);
> +
> +static struct i2c_driver ab3100_driver = {
> + .driver = {
> + .name = "ab3100",
> + .owner = THIS_MODULE,
> + },
> + .id_table = ab3100_id,
> + .probe = ab3100_probe,
> + .remove = __exit_p(ab3100_remove),
> +};
> +
> +static int __init ab3100_i2c_init(void)
> +{
> + return i2c_add_driver(&ab3100_driver);
> +}
> +
> +static void __exit ab3100_i2c_exit(void)
> +{
> + i2c_del_driver(&ab3100_driver);
> +}
> +
> +subsys_initcall(ab3100_i2c_init);
> +module_exit(ab3100_i2c_exit);
> +
> +MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
> +MODULE_DESCRIPTION("AB3100 core driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h
> new file mode 100644
> index 0000000..7a3f316
> --- /dev/null
> +++ b/include/linux/mfd/ab3100.h
> @@ -0,0 +1,103 @@
> +/*
> + * Copyright (C) 2007-2009 ST-Ericsson AB
> + * License terms: GNU General Public License (GPL) version 2
> + * AB3100 core access functions
> + * Author: Linus Walleij <linus.walleij@stericsson.com>
> + */
> +
> +#include <linux/device.h>
> +
> +#ifndef MFD_AB3100_H
> +#define MFD_AB3100_H
> +
> +#define ABUNKNOWN 0
> +#define AB3000 1
> +#define AB3100 2
> +
> +/*
> + * AB3100, EVENTA1, A2 and A3 event register flags
> + * these are catenated into a single 32-bit flag in the code
> + * for event notification broadcasts.
> + */
> +#define AB3100_EVENTA1_ONSWA (0x01<<16)
> +#define AB3100_EVENTA1_ONSWB (0x02<<16)
> +#define AB3100_EVENTA1_ONSWC (0x04<<16)
> +#define AB3100_EVENTA1_DCIO (0x08<<16)
> +#define AB3100_EVENTA1_OVER_TEMP (0x10<<16)
> +#define AB3100_EVENTA1_SIM_OFF (0x20<<16)
> +#define AB3100_EVENTA1_VBUS (0x40<<16)
> +#define AB3100_EVENTA1_VSET_USB (0x80<<16)
> +
> +#define AB3100_EVENTA2_READY_TX (0x01<<8)
> +#define AB3100_EVENTA2_READY_RX (0x02<<8)
> +#define AB3100_EVENTA2_OVERRUN_ERROR (0x04<<8)
> +#define AB3100_EVENTA2_FRAMING_ERROR (0x08<<8)
> +#define AB3100_EVENTA2_CHARG_OVERCURRENT (0x10<<8)
> +#define AB3100_EVENTA2_MIDR (0x20<<8)
> +#define AB3100_EVENTA2_BATTERY_REM (0x40<<8)
> +#define AB3100_EVENTA2_ALARM (0x80<<8)
> +
> +#define AB3100_EVENTA3_ADC_TRIG5 (0x01)
> +#define AB3100_EVENTA3_ADC_TRIG4 (0x02)
> +#define AB3100_EVENTA3_ADC_TRIG3 (0x04)
> +#define AB3100_EVENTA3_ADC_TRIG2 (0x08)
> +#define AB3100_EVENTA3_ADC_TRIGVBAT (0x10)
> +#define AB3100_EVENTA3_ADC_TRIGVTX (0x20)
> +#define AB3100_EVENTA3_ADC_TRIG1 (0x40)
> +#define AB3100_EVENTA3_ADC_TRIG0 (0x80)
> +
> +/* AB3100, STR register flags */
> +#define AB3100_STR_ONSWA (0x01)
> +#define AB3100_STR_ONSWB (0x02)
> +#define AB3100_STR_ONSWC (0x04)
> +#define AB3100_STR_DCIO (0x08)
> +#define AB3100_STR_BOOT_MODE (0x10)
> +#define AB3100_STR_SIM_OFF (0x20)
> +#define AB3100_STR_BATT_REMOVAL (0x40)
> +#define AB3100_STR_VBUS (0x80)
> +
> +/**
> + * struct ab3100
> + * @access_mutex: lock out concurrent accesses to the AB3100 registers
> + * @dev: pointer to the containing device
> + * @i2c_client: I2C client for this chip
> + * @testreg_client: secondary client for test registers
> + * @chip_name: name of this chip variant
> + * @chip_id: 8 bit chip ID for this chip variant
> + * @work: an event handling worker
> + * @event_subscribers: event subscribers are listed here
> + * @startup_events: a copy of the first reading of the event registers
> + * @startup_events_read: whether the first events have been read
> + *
> + * This struct is PRIVATE and devices using it should NOT
> + * access ANY fields. It is used as a token for calling the
> + * AB3100 functions.
> + */
> +struct ab3100 {
> + struct mutex access_mutex;
> + struct device *dev;
> + struct i2c_client *i2c_client;
> + struct i2c_client *testreg_client;
> + char chip_name[32];
> + u8 chip_id;
> + struct work_struct work;
> + struct blocking_notifier_head event_subscribers;
> + u32 startup_events;
> + bool startup_events_read;
> +};
> +
> +int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval);
> +int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval);
> +int ab3100_get_register_page(struct ab3100 *ab3100,
> + u8 first_reg, u8 *regvals, u8 numregs);
> +int ab3100_mask_and_set_register(struct ab3100 *ab3100,
> + u8 reg, u8 andmask, u8 ormask);
> +u8 ab3100_get_chip_type(struct ab3100 *ab3100);
> +int ab3100_event_register(struct ab3100 *ab3100,
> + struct notifier_block *nb);
> +int ab3100_event_unregister(struct ab3100 *ab3100,
> + struct notifier_block *nb);
> +int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
> + u32 *fatevent);
> +
> +#endif
> --
> 1.6.2.1

--
Intel Open Source Technology Centre
http://oss.intel.com/


\
 
 \ /
  Last update: 2009-05-25 10:27    [W:0.127 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site