lkml.org 
[lkml]   [2009]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 0/11] Per-bdi writeback flusher threads #4
On Fri, May 22 2009, Jens Axboe wrote:
> On Fri, May 22 2009, Zhang, Yanmin wrote:
> > On Thu, 2009-05-21 at 11:10 +0200, Jan Kara wrote:
> > > On Thu 21-05-09 14:33:47, Zhang, Yanmin wrote:
> > > > On Wed, 2009-05-20 at 13:19 +0200, Jens Axboe wrote:
> > > > > On Wed, May 20 2009, Jens Axboe wrote:
> > > > > > On Wed, May 20 2009, Zhang, Yanmin wrote:
> > > > > > > On Wed, 2009-05-20 at 10:54 +0200, Jens Axboe wrote:
> > > > > > > > On Wed, May 20 2009, Jens Axboe wrote:
> > > > > > > > > On Wed, May 20 2009, Zhang, Yanmin wrote:
> > > > > > > > > > On Tue, 2009-05-19 at 08:20 +0200, Jens Axboe wrote:
> > > > > > > > > > > On Tue, May 19 2009, Zhang, Yanmin wrote:
> > > > > > > > > > > > On Mon, 2009-05-18 at 14:19 +0200, Jens Axboe wrote:
> > > > > > > > > > > > > Hi,
> > > > > > > > > > > > >
> > > > > > > > > > > > > This is the fourth version of this patchset. Chances since v3:
> > > > > > > > > > > > >
> > > > > > > > > > > > > - Dropped a prep patch, it has been included in mainline since.
> > > > > > > > > > > > >
> > > > > > > > > > > > > - Add a work-to-do list to the bdi. This is struct bdi_work. Each
> > > > > > > > > > > > > wb thread will notice and execute work on bdi->work_list. The arguments
> > > > > > > > > > > > > are which sb (or NULL for all) to flush and how many pages to flush.
> > > > > > > > > > > > >
> > > > > > > > > > > > > - Fix a bug where not all bdi's would end up on the bdi_list, so potentially
> > > > > > > > > > > > > some data would not be flushed.
> > > > > > > > > > > > >
> > > > > > > > > > > > > - Make wb_kupdated() pass on wbc->older_than_this so we maintain the same
> > > > > > > > > > > > > behaviour for kupdated flushes.
> > > > > > > > > > > > >
> > > > > > > > > > > > > - Have the wb thread flush first before sleeping, to avoid losing the
> > > > > > > > > > > > > first flush on lazy register.
> > > > > > > > > > > > >
> > > > > > > > > > > > > - Rebase to newer kernels.
> > > > > > > > > >
> > > > > > > > > > > I'm attaching two patches - apply #1 to -rc6, and then #2 is a roll-up
> > > > > > > > > > > of the patch series that you can apply next.
> > > > > > > > > > Jens,
> > > > > > > > > >
> > > > > > > > > > I run into 2 issues with kernel 2.6.30-rc6+BDI_Flusher_V4. Below is one.
> > > > > > > > > >
> > > > > > > > > > Tue May 19 00:00:00 CST 2009
> > > > > > > > > > BUG: unable to handle kernel NULL pointer dereference at 00000000000001d8
> > > > > > > > > > IP: [<ffffffff803f3c4c>] generic_make_request+0x10a/0x384
> > > > > > > > > > PGD 0
> > > > > > > > > > Oops: 0000 [#1] SMP
> > > > > > > > > > last sysfs file: /sys/block/sdb/stat
> > > > > > > > > > CPU 0
> > > > > > > > > > Modules linked in: igb
> > > > > > > > > > Pid: 1445, comm: bdi-8:16 Not tainted 2.6.30-rc6-bdiflusherv4 #1 X8DTN
> > > > > > > > > > RIP: 0010:[<ffffffff803f3c4c>] [<ffffffff803f3c4c>] generic_make_request+0x10a/0x384
> > > > > > > > > > RSP: 0018:ffff8800bd04da60 EFLAGS: 00010206
> > > > > > > > > > RAX: 0000000000000000 RBX: ffff8801be45d500 RCX: 00000000038a0df8
> > > > > > > > > > RDX: 0000000000000008 RSI: 0000000000000576 RDI: ffff8801bf408680
> > > > > > > > > > RBP: ffff8801be45d500 R08: ffffe20001ee8140 R09: ffff8800bd04da98
> > > > > > > > > > R10: 0000000000000000 R11: ffff8800bd72eb40 R12: ffff8801be45d500
> > > > > > > > > > R13: ffff88005f51f310 R14: 0000000000000008 R15: ffff8800b15a5458
> > > > > > > > > > FS: 0000000000000000(0000) GS:ffffc20000000000(0000) knlGS:0000000000000000
> > > > > > > > > > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> > > > > > > > > > CR2: 00000000000001d8 CR3: 0000000000201000 CR4: 00000000000006e0
> > > > > > > > > > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > > > > > > > > > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > > > > > > > > > Process bdi-8:16 (pid: 1445, threadinfo ffff8800bd04c000, task ffff8800bd1b75f0)
> > > > > > > > > > Stack:
> > > > > > > > > > 0000000000000008 ffffffff8027a613 00000000848dc000 ffffffffffffffff
> > > > > > > > > > ffff8800a8190f50 ffffffff00000012 ffff8800a81938e0 ffffc2000000001b
> > > > > > > > > > 0000000000000000 0000000000000000 ffffe200026f9c30 0000000000000000
> > > > > > > > > > Call Trace:
> > > > > > > > > > [<ffffffff8027a613>] ? mempool_alloc+0x59/0x10f
> > > > > > > > > > [<ffffffff803f3f70>] ? submit_bio+0xaa/0xb1
> > > > > > > > > > [<ffffffff802c6a3f>] ? submit_bh+0xe3/0x103
> > > > > > > > > > [<ffffffff802c92ea>] ? __block_write_full_page+0x1fb/0x2f2
> > > > > > > > > > [<ffffffff802c7d6a>] ? end_buffer_async_write+0x0/0xfb
> > > > > > > > > > [<ffffffff8027e8d2>] ? __writepage+0xa/0x25
> > > > > > > > > > [<ffffffff8027f036>] ? write_cache_pages+0x21c/0x338
> > > > > > > > > > [<ffffffff8027e8c8>] ? __writepage+0x0/0x25
> > > > > > > > > > [<ffffffff8027f195>] ? do_writepages+0x27/0x2d
> > > > > > > > > > [<ffffffff802c22c1>] ? __writeback_single_inode+0x159/0x2b3
> > > > > > > > > > [<ffffffff8071e52a>] ? thread_return+0x3e/0xaa
> > > > > > > > > > [<ffffffff8027f267>] ? determine_dirtyable_memory+0xd/0x1d
> > > > > > > > > > [<ffffffff8027f2dd>] ? get_dirty_limits+0x1d/0x255
> > > > > > > > > > [<ffffffff802c27bc>] ? generic_sync_wb_inodes+0x1b4/0x220
> > > > > > > > > > [<ffffffff802c3130>] ? wb_do_writeback+0x16c/0x215
> > > > > > > > > > [<ffffffff802c323e>] ? bdi_writeback_task+0x65/0x10d
> > > > > > > > > > [<ffffffff8024cc06>] ? autoremove_wake_function+0x0/0x2e
> > > > > > > > > > [<ffffffff8024cb27>] ? bit_waitqueue+0x10/0xa0
> > > > > > > > > > [<ffffffff80289257>] ? bdi_start_fn+0x0/0xba
> > > > > > > > > > [<ffffffff802892c6>] ? bdi_start_fn+0x6f/0xba
> > > > > > > > > > [<ffffffff8024c860>] ? kthread+0x54/0x80
> > > > > > > > > > [<ffffffff8020c97a>] ? child_rip+0xa/0x20
> > > > > > > > > > [<ffffffff8024c80c>] ? kthread+0x0/0x80
> > > > > > > > > > [<ffffffff8020c970>] ? child_rip+0x0/0x20
> > > > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > >
> > > > > > > > I found one issue yesterday and one today that could cause issues, not
> > > > > > > > sure it would explain this one. But at least it's worth a try, if it's
> > > > > > > > reproducible.
> > > > > > > I just reproduced it a moment ago manually.
> > > > > > >
> > > > > > > [global]
> > > > > > > direct=0
> > > > > > > ioengine=mmap
> > > > > > > iodepth=256
> > > > > > > iodepth_batch=32
> > > > > > > size=4G
> > > > > > > bs=4k
> > > > > > > pre_read=1
> > > > > > > overwrite=1
> > > > > > > numjobs=1
> > > > > > > loops=5
> > > > > > > runtime=600
> > > > > > > group_reporting
> > > > > > > directory=/mnt/stp/fiodata
> > > > > > > [job_group0_sub0]
> > > > > > > startdelay=0
> > > > > > > rw=randwrite
> > > > > > > filename=data0/f1:data0/f2
> > > > > > >
> > > > > > >
> > > > > > > The fio includes my preread patch to flush files to memory.
> > > > > > >
> > > > > > > Before starting the second testing, I did a cache dropping by:
> > > > > > > #echo "3">/proc/sys/vm/drop_caches.
> > > > > > >
> > > > > > > I suspect the drop_caches trigger it.
> > > > > >
> > > > > > Thanks, will try this. What filesystem and mount options did you use?
> > > > >
> > > > > No luck reproducing so far.
> > > > All my testing are started with automation scripts. I found below step could
> > > > trigger it.
> > > > 1) Use an exclusive partition to test it; for example I use /dev/sdb1 on this
> > > > machine;
> > > > 2) After running the fio test case, immediately umount and mount the disk back:
> > > > #sudo umount /dev/sdb1
> > > > #sudo mount /dev/sdb1 /mnt/stp
> > > >
> > > >
> > > > > In other news, I have finally merged your
> > > > > fio pre_read patch :-)
> > > > Thanks.
> > > >
> > > > >
> > > > > I've run it here many times, works fine with the current writeback
> > > > > branch. Since I did the runs anyway, I did comparisons between mainline
> > > > > and writeback for this test. Each test was run 10 times, averages below.
> > > > > The throughput deviated less than 1MB/sec, so results are very stable.
> > > > > CPU usage percentages were always within 0.5%.
> > > > >
> > > > > Kernel Throughput usr sys disk util
> > > > > -----------------------------------------------------------------
> > > > > writeback 175MB/sec 17.55% 43.04% 97.80%
> > > > > vanilla 147MB/sec 13.44% 47.33% 85.98%
> > > > >
> > > > > The results for this test is particularly interesting, since it's very
> > > > > heavy on the writeback side. pdflush/bdi threads were pretty busy. User
> > > > > time is up (even if corrected for higher throughput), but system time is
> > > > > down a lot. Vanilla isn't close to keeping the disk busy, with the
> > > > > writeback patches we are basically there (100% would be pretty much
> > > > > impossible to reach).
> > > > >
> > > > > Please try with the patches I sent. If you still see problems, we need
> > > > > to look more closely into that.
> > > > I tried the new patches. It seems it improves fio mmap randwrite 4k for about
> > > > 50% on the machine (single disk). The old panic disappears, but there is a new panic.
> > > >
> > > > [ROOT@LKP-NE01 ~]# BUG: unable to handle kernel NULL pointer dereference at 0000000000000190
> > > > IP: [<ffffffff803270b6>] ext3_invalidatepage+0x18/0x38
> > > > PGD 0
> > > > Oops: 0000 [#1] SMP
> > > > last sysfs file: /sys/block/sdb/stat
> > > > CPU 0
> > > > Modules linked in: igb
> > > > Pid: 7681, comm: umount Not tainted 2.6.30-rc6-bdiflusherv4fix #1 X8DTN
> > > > RIP: 0010:[<ffffffff803270b6>] [<ffffffff803270b6>] ext3_invalidatepage+0x18/0x38
> > > > RSP: 0018:ffff8801bdc47d20 EFLAGS: 00010246
> > > > RAX: 0000000000000000 RBX: ffffe200058514a0 RCX: 0000000000000002
> > > > RDX: 000000000000000e RSI: 0000000000000000 RDI: ffffe200058514a0
> > > > RBP: 0000000000000000 R08: 0000000000000003 R09: 000000000000000e
> > > > R10: 000000000000000d R11: ffffffff8032709e R12: 0000000000000000
> > > > R13: 0000000000000000 R14: ffff8801bdc47d78 R15: ffff8800bc0dd888
> > > > FS: 00007f48d77237d0(0000) GS:ffffc20000000000(0000) knlGS:0000000000000000
> > > > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> > > > CR2: 0000000000000190 CR3: 00000000bc867000 CR4: 00000000000006e0
> > > > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > > > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > > > Process umount (pid: 7681, threadinfo ffff8801bdc46000, task ffff8801bde194d0)
> > > > Stack:
> > > > ffffffff80280ef7 ffffe200058514a0 ffffffff80280ffd ffff8801bdc47d78
> > > > 0000000e0290c538 000000000049d801 0000000000000000 0000000000000000
> > > > ffffffffffffffff 000000000000000e 0000000000000000 ffffe200058514a0
> > > > Call Trace:
> > > > [<ffffffff80280ef7>] ? truncate_complete_page+0x1d/0x59
> > > > [<ffffffff80280ffd>] ? truncate_inode_pages_range+0xca/0x32e
> > > > [<ffffffff802ba8bc>] ? dispose_list+0x39/0xe4
> > > > [<ffffffff802bac68>] ? invalidate_inodes+0xf1/0x10f
> > > > [<ffffffff802ab77b>] ? generic_shutdown_super+0x78/0xde
> > > > [<ffffffff802ab803>] ? kill_block_super+0x22/0x3a
> > > > [<ffffffff802abe49>] ? deactivate_super+0x5f/0x76
> > > > [<ffffffff802bdf2f>] ? sys_umount+0x2cd/0x2fc
> > > > [<ffffffff8020ba2b>] ? system_call_fastpath+0x16/0x1b
> > > >
> > > >
> > > >
> > > > ext3_invalidatepage => EXT3_JOURNAL(page->mapping->host) while
> > > > EXT3_SB((inode)->i_sb) is equal to NULL.
> > > >
> > > > It seems umount triggers the new panic.
> > > Hmm, unlike previous oops in ext3, this does not seem to be ext3 problem
> > > (at least at the first sight). Somehow invalidate_inodes() is able to find
> > > invalidated inodes on i_sb_list...
> > Caught previous oops again.
> > I(my script) do a sync after fio testing and before umount /dev/sdb1.
> >
> >
> > BUG: unable to handle kernel NULL pointer dereference at 00000000000001d8
> > IP: [<ffffffff803f3cec>] generic_make_request+0x10a/0x384
> > PGD 0
> > Oops: 0000 [#1] SMP
> > last sysfs file: /sys/block/sdb/stat
> > CPU 0
> > Modules linked in: igb
> > Pid: 1446, comm: bdi-8:16 Not tainted 2.6.30-rc6-bdiflusherV4fix #1 X8DTN
> > RIP: 0010:[<ffffffff803f3cec>] [<ffffffff803f3cec>] generic_make_request+0x10a/0x384
> > RSP: 0018:ffff8800bd295a60 EFLAGS: 00010206
> > RAX: 0000000000000000 RBX: ffff8800bd405b00 RCX: 0000000002cd1a40
> > RDX: 0000000000000008 RSI: 0000000000000576 RDI: ffff8801bf4096c0
> > RBP: ffff8800bd405b00 R08: ffffe20006141cf8 R09: ffff8800bd295a98
> > R10: 0000000000000000 R11: ffff8800bd405c80 R12: ffff8800bd405b00
> > R13: ffff88008bc4c150 R14: 0000000000000008 R15: ffff88008059dda0
> > FS: 0000000000000000(0000) GS:ffffc20000000000(0000) knlGS:0000000000000000
> > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> > CR2: 00000000000001d8 CR3: 0000000000201000 CR4: 00000000000006e0
> > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > Process bdi-8:16 (pid: 1446, threadinfo ffff8800bd294000, task ffff8800bd2375f0)
> > Stack:
> > 0000000000000008 ffffffff8027a613 00000000bd0f60d0 ffffffffffffffff
> > ffff88007b5cfb10 0000000000000001 ffff88007d504000 ffff880000000006
> > 0000000000011200 ffff8800bd61d444 ffffffffffffffcf 0000000000000000
> > Call Trace:
> > [<ffffffff8027a613>] ? mempool_alloc+0x59/0x10f
> > [<ffffffff803f4010>] ? submit_bio+0xaa/0xb1
> > [<ffffffff802c6aeb>] ? submit_bh+0xe3/0x103
> > [<ffffffff802c9396>] ? __block_write_full_page+0x1fb/0x2f2
> > [<ffffffff802c7e16>] ? end_buffer_async_write+0x0/0xfb
> > [<ffffffff8027e8d2>] ? __writepage+0xa/0x25
> > [<ffffffff8027f036>] ? write_cache_pages+0x21c/0x338
> > [<ffffffff8027e8c8>] ? __writepage+0x0/0x25
> > [<ffffffff8027f195>] ? do_writepages+0x27/0x2d
> > [<ffffffff802c22c9>] ? __writeback_single_inode+0x159/0x2b3
> > [<ffffffff8071e5ca>] ? thread_return+0x3e/0xaa
> > [<ffffffff8027f267>] ? determine_dirtyable_memory+0xd/0x1d
> > [<ffffffff8027f2dd>] ? get_dirty_limits+0x1d/0x255
> > [<ffffffff802c27c4>] ? generic_sync_wb_inodes+0x1b4/0x220
> > [<ffffffff802c31dd>] ? wb_do_writeback+0x16c/0x215
> > [<ffffffff802c32eb>] ? bdi_writeback_task+0x65/0x10d
> > [<ffffffff8024cc06>] ? autoremove_wake_function+0x0/0x2e
> > [<ffffffff8024cb27>] ? bit_waitqueue+0x10/0xa0
> > [<ffffffff80289257>] ? bdi_start_fn+0x0/0xc0
> > [<ffffffff802892cc>] ? bdi_start_fn+0x75/0xc0
> > [<ffffffff8024c860>] ? kthread+0x54/0x80
> > [<ffffffff8020c97a>] ? child_rip+0xa/0x20
> > [<ffffffff8024c80c>] ? kthread+0x0/0x80
> > [<ffffffff8020c970>] ? child_rip+0x0/0x20
> > Code: 39 c8 0f 82 ba 01 00 00 44 89 f0 c7 44 24 14 00 00 00 00 48 c7 44 24 18 ff ff ff ff 48 89 04 24 48 8b 7d 10 48 8b 87
> > RIP [<ffffffff803f3cec>] generic_make_request+0x10a/0x384
>
> Thanks, I'll get this reproduced and fixed. Can you post the results
> you got comparing writeback and vanilla meanwhile?

Please try with this combined patch against what you are running now, it
should resolve the issue. It needs a bit more work, but I'm running out
of time today. I'l get it finalized, cleaned up, and integrated. Then
I'll post a new revision of the patch set.

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index f80afaa..e9fc346 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -50,6 +50,7 @@ struct bdi_work {

unsigned long sb_data;
unsigned long nr_pages;
+ enum writeback_sync_modes sync_mode;

unsigned long state;
};
@@ -65,19 +66,22 @@ static inline bool bdi_work_on_stack(struct bdi_work *work)
}

static inline void bdi_work_init(struct bdi_work *work, struct super_block *sb,
- unsigned long nr_pages)
+ unsigned long nr_pages,
+ enum writeback_sync_modes sync_mode)
{
INIT_RCU_HEAD(&work->rcu_head);
work->sb_data = (unsigned long) sb;
work->nr_pages = nr_pages;
+ work->sync_mode = sync_mode;
work->state = 0;
}

static inline void bdi_work_init_on_stack(struct bdi_work *work,
struct super_block *sb,
- unsigned long nr_pages)
+ unsigned long nr_pages,
+ enum writeback_sync_modes sync_mode)
{
- bdi_work_init(work, sb, nr_pages);
+ bdi_work_init(work, sb, nr_pages, sync_mode);
set_bit(0, &work->state);
work->sb_data |= 1UL;
}
@@ -189,17 +193,17 @@ static void bdi_wait_on_work_start(struct bdi_work *work)
}

int bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
- long nr_pages)
+ long nr_pages, enum writeback_sync_modes sync_mode)
{
struct bdi_work work_stack, *work;
int ret;

work = kmalloc(sizeof(*work), GFP_ATOMIC);
if (work)
- bdi_work_init(work, sb, nr_pages);
+ bdi_work_init(work, sb, nr_pages, sync_mode);
else {
work = &work_stack;
- bdi_work_init_on_stack(work, sb, nr_pages);
+ bdi_work_init_on_stack(work, sb, nr_pages, sync_mode);
}

ret = bdi_queue_writeback(bdi, work);
@@ -274,11 +278,12 @@ static long wb_kupdated(struct bdi_writeback *wb)
}

static long __wb_writeback(struct bdi_writeback *wb, long nr_pages,
- struct super_block *sb)
+ struct super_block *sb,
+ enum writeback_sync_modes sync_mode)
{
struct writeback_control wbc = {
.bdi = wb->bdi,
- .sync_mode = WB_SYNC_NONE,
+ .sync_mode = sync_mode,
.older_than_this = NULL,
.range_cyclic = 1,
};
@@ -345,9 +350,10 @@ static long wb_writeback(struct bdi_writeback *wb)
while ((work = get_next_work_item(bdi, wb)) != NULL) {
struct super_block *sb = bdi_work_sb(work);
long nr_pages = work->nr_pages;
+ enum writeback_sync_modes sync_mode = work->sync_mode;

wb_clear_pending(wb, work);
- wrote += __wb_writeback(wb, nr_pages, sb);
+ wrote += __wb_writeback(wb, nr_pages, sb, sync_mode);
}

return wrote;
@@ -420,39 +426,36 @@ int bdi_writeback_task(struct bdi_writeback *wb)
return 0;
}

-void bdi_writeback_all(struct super_block *sb, long nr_pages)
+/*
+ * Do in-line writeback of all backing devices. Expensive!
+ */
+void bdi_writeback_all(struct super_block *sb, long nr_pages,
+ enum writeback_sync_modes sync_mode)
{
- struct list_head *entry = &bdi_list;
+ struct backing_dev_info *bdi;

- rcu_read_lock();
+ mutex_lock(&bdi_mutex);

- list_for_each_continue_rcu(entry, &bdi_list) {
- struct backing_dev_info *bdi;
- struct list_head *next;
- struct bdi_work *work;
-
- bdi = list_entry(entry, struct backing_dev_info, bdi_list);
+ list_for_each_entry(bdi, &bdi_list, bdi_list) {
if (!bdi_has_dirty_io(bdi))
continue;

- /*
- * If this allocation fails, we just wakeup the thread and
- * let it do kupdate writeback
- */
- work = kmalloc(sizeof(*work), GFP_ATOMIC);
- if (work)
- bdi_work_init(work, sb, nr_pages);
+ if (!bdi_wblist_needs_lock(bdi))
+ r = __wb_writeback(&bdi->wb, 0, sb, sync_mode);
+ else {
+ struct bdi_writeback *wb;
+ int idx;

- /*
- * Prepare to start from previous entry if this one gets moved
- * to the bdi_pending list.
- */
- next = entry->prev;
- if (bdi_queue_writeback(bdi, work))
- entry = next;
+ idx = srcu_read_lock(&bdi->srcu);
+
+ list_for_each_entry_rcu(wb, &bdi->wb_list, list)
+ r += __wb_writeback(&bdi->wb, 0, sb, sync_mode);
+
+ srcu_read_unlock(&bdi->srcu, idx);
+ }
}

- rcu_read_unlock();
+ mutex_unlock(&bdi_mutex);
}

/*
@@ -972,9 +975,9 @@ void generic_sync_sb_inodes(struct super_block *sb,
struct writeback_control *wbc)
{
if (wbc->bdi)
- bdi_start_writeback(wbc->bdi, sb, 0);
+ generic_sync_bdi_inodes(sb, wbc);
else
- bdi_writeback_all(sb, 0);
+ bdi_writeback_all(sb, 0, wbc->sync_mode);

if (wbc->sync_mode == WB_SYNC_ALL) {
struct inode *inode, *old_inode = NULL;
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 7c2874f..c9ddca4 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -15,6 +15,7 @@
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/srcu.h>
+#include <linux/writeback.h>
#include <asm/atomic.h>

struct page;
@@ -60,7 +61,6 @@ struct bdi_writeback {
#define BDI_MAX_FLUSHERS 32

struct backing_dev_info {
- struct rcu_head rcu_head;
struct srcu_struct srcu; /* for wb_list read side protection */
struct list_head bdi_list;
unsigned long ra_pages; /* max readahead in PAGE_CACHE_SIZE units */
@@ -105,14 +105,15 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent,
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
void bdi_unregister(struct backing_dev_info *bdi);
int bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
- long nr_pages);
+ long nr_pages, enum writeback_sync_modes sync_mode);
int bdi_writeback_task(struct bdi_writeback *wb);
-void bdi_writeback_all(struct super_block *sb, long nr_pages);
+void bdi_writeback_all(struct super_block *sb, long nr_pages,
+ enum writeback_sync_modes sync_mode);
void bdi_add_default_flusher_task(struct backing_dev_info *bdi);
void bdi_add_flusher_task(struct backing_dev_info *bdi);
int bdi_has_dirty_io(struct backing_dev_info *bdi);

-extern spinlock_t bdi_lock;
+extern struct mutex bdi_mutex;
extern struct list_head bdi_list;

static inline int wb_is_default_task(struct bdi_writeback *wb)
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 60578bc..0e09051 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -26,7 +26,7 @@ struct backing_dev_info default_backing_dev_info = {
EXPORT_SYMBOL_GPL(default_backing_dev_info);

static struct class *bdi_class;
-DEFINE_SPINLOCK(bdi_lock);
+DEFINE_MUTEX(bdi_mutex);
LIST_HEAD(bdi_list);
LIST_HEAD(bdi_pending_list);

@@ -360,14 +360,15 @@ static int bdi_start_fn(void *ptr)
* Clear pending bit and wakeup anybody waiting to tear us down
*/
clear_bit(BDI_pending, &bdi->state);
+ smp_mb__after_clear_bit();
wake_up_bit(&bdi->state, BDI_pending);

/*
* Make us discoverable on the bdi_list again
*/
- spin_lock_bh(&bdi_lock);
- list_add_tail_rcu(&bdi->bdi_list, &bdi_list);
- spin_unlock_bh(&bdi_lock);
+ mutex_lock(&bdi_mutex);
+ list_add_tail(&bdi->bdi_list, &bdi_list);
+ mutex_unlock(&bdi_mutex);

ret = bdi_writeback_task(wb);

@@ -422,12 +423,6 @@ static int bdi_forker_task(void *ptr)
struct backing_dev_info *bdi;
struct bdi_writeback *wb;

- prepare_to_wait(&me->wait, &wait, TASK_INTERRUPTIBLE);
-
- smp_mb();
- if (list_empty(&bdi_pending_list))
- schedule();
-
/*
* Ideally we'd like not to see any dirty inodes on the
* default_backing_dev_info. Until these are tracked down,
@@ -438,19 +433,23 @@ static int bdi_forker_task(void *ptr)
if (wb_has_dirty_io(me) || !list_empty(&me->bdi->work_list))
wb_do_writeback(me);

+ prepare_to_wait(&me->wait, &wait, TASK_INTERRUPTIBLE);
+
+ mutex_lock(&bdi_mutex);
+ if (list_empty(&bdi_pending_list)) {
+ mutex_unlock(&bdi_mutex);
+ schedule();
+ continue;
+ }
+
/*
* This is our real job - check for pending entries in
* bdi_pending_list, and create the tasks that got added
*/
-repeat:
- bdi = NULL;
- spin_lock_bh(&bdi_lock);
- if (!list_empty(&bdi_pending_list)) {
- bdi = list_entry(bdi_pending_list.next,
+ bdi = list_entry(bdi_pending_list.next,
struct backing_dev_info, bdi_list);
- list_del_init(&bdi->bdi_list);
- }
- spin_unlock_bh(&bdi_lock);
+ list_del_init(&bdi->bdi_list);
+ mutex_unlock(&bdi_mutex);

if (!bdi)
continue;
@@ -475,12 +474,11 @@ readd_flush:
* a chance to flush other bdi's to free
* memory.
*/
- spin_lock_bh(&bdi_lock);
+ mutex_lock(&bdi_mutex);
list_add_tail(&bdi->bdi_list, &bdi_pending_list);
- spin_unlock_bh(&bdi_lock);
+ mutex_unlock(&bdi_mutex);

bdi_flush_io(bdi);
- goto repeat;
}
}

@@ -488,26 +486,6 @@ readd_flush:
return 0;
}

-/*
- * Grace period has now ended, init bdi->bdi_list and add us to the
- * list of bdi's that are pending for task creation. Wake up
- * bdi_forker_task() to finish the job and add us back to the
- * active bdi_list.
- */
-static void bdi_add_to_pending(struct rcu_head *head)
-{
- struct backing_dev_info *bdi;
-
- bdi = container_of(head, struct backing_dev_info, rcu_head);
- INIT_LIST_HEAD(&bdi->bdi_list);
-
- spin_lock(&bdi_lock);
- list_add_tail(&bdi->bdi_list, &bdi_pending_list);
- spin_unlock(&bdi_lock);
-
- wake_up(&default_backing_dev_info.wb.wait);
-}
-
static void bdi_add_one_flusher_task(struct backing_dev_info *bdi,
int(*func)(struct backing_dev_info *))
{
@@ -526,17 +504,15 @@ static void bdi_add_one_flusher_task(struct backing_dev_info *bdi,
* waiting for previous additions to finish.
*/
if (!func(bdi)) {
- spin_lock_bh(&bdi_lock);
- list_del_rcu(&bdi->bdi_list);
- spin_unlock_bh(&bdi_lock);
+ mutex_lock(&bdi_mutex);
+ list_move_tail(&bdi->bdi_list, &bdi_pending_list);
+ mutex_unlock(&bdi_mutex);

/*
- * We need to wait for the current grace period to end,
- * in case others were browsing the bdi_list as well.
- * So defer the adding and wakeup to after the RCU
- * grace period has ended.
+ * We are now on the pending list, wake up bdi_forker_task()
+ * to finish the job and add us abck to the active bdi_list
*/
- call_rcu(&bdi->rcu_head, bdi_add_to_pending);
+ wake_up(&default_backing_dev_info.wb.wait);
}
}

@@ -593,6 +569,14 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent,
goto exit;
}

+ mutex_lock(&bdi_mutex);
+ list_add_tail_rcu(&bdi->bdi_list, &bdi_list);
+ mutex_unlock(&bdi_mutex);
+
+ bdi->dev = dev;
+ bdi_debug_register(bdi, dev_name(dev));
+ set_bit(BDI_registered, &bdi->state);
+
/*
* Just start the forker thread for our default backing_dev_info,
* and add other bdi's to the list. They will get a thread created
@@ -614,16 +598,16 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent,
ret = -ENOMEM;
goto exit;
}
+ } else {
+ /*
+ * start the default thread. this will exit if nothing
+ * happens for a while, but it's important to start it here
+ * or we will not notice that we have dirty data there,
+ * until memory pressure sets in.
+ */
+ bdi_add_default_flusher_task(bdi);
}

- spin_lock_bh(&bdi_lock);
- list_add_tail_rcu(&bdi->bdi_list, &bdi_list);
- spin_unlock_bh(&bdi_lock);
-
- bdi->dev = dev;
- bdi_debug_register(bdi, dev_name(dev));
- set_bit(BDI_registered, &bdi->state);
-
exit:
return ret;
}
@@ -655,15 +639,9 @@ static void bdi_wb_shutdown(struct backing_dev_info *bdi)
/*
* Make sure nobody finds us on the bdi_list anymore
*/
- spin_lock_bh(&bdi_lock);
+ mutex_lock(&bdi_mutex);
list_del_rcu(&bdi->bdi_list);
- spin_unlock_bh(&bdi_lock);
-
- /*
- * Now make sure that anybody who is currently looking at us from
- * the bdi_list iteration have exited.
- */
- synchronize_rcu();
+ mutex_unlock(&bdi_mutex);

/*
* Finally, kill the kernel threads. We don't need to be RCU
@@ -689,7 +667,6 @@ int bdi_init(struct backing_dev_info *bdi)
{
int i, err;

- INIT_RCU_HEAD(&bdi->rcu_head);
bdi->dev = NULL;

bdi->min_ratio = 0;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index de3178a..f1785bb 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -313,9 +313,8 @@ static unsigned int bdi_min_ratio;
int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio)
{
int ret = 0;
- unsigned long flags;

- spin_lock_irqsave(&bdi_lock, flags);
+ mutex_lock(&bdi_mutex);
if (min_ratio > bdi->max_ratio) {
ret = -EINVAL;
} else {
@@ -327,27 +326,26 @@ int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio)
ret = -EINVAL;
}
}
- spin_unlock_irqrestore(&bdi_lock, flags);
+ mutex_unlock(&bdi_mutex);

return ret;
}

int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned max_ratio)
{
- unsigned long flags;
int ret = 0;

if (max_ratio > 100)
return -EINVAL;

- spin_lock_irqsave(&bdi_lock, flags);
+ mutex_lock(&bdi_mutex);
if (bdi->min_ratio > max_ratio) {
ret = -EINVAL;
} else {
bdi->max_ratio = max_ratio;
bdi->max_prop_frac = (PROP_FRAC_BASE * max_ratio) / 100;
}
- spin_unlock_irqrestore(&bdi_lock, flags);
+ mutex_unlock(&bdi_mutex);

return ret;
}
@@ -581,7 +579,7 @@ static void balance_dirty_pages(struct address_space *mapping)
(!laptop_mode && (global_page_state(NR_FILE_DIRTY)
+ global_page_state(NR_UNSTABLE_NFS)
> background_thresh)))
- bdi_start_writeback(bdi, NULL, 0);
+ bdi_start_writeback(bdi, NULL, 0, WB_SYNC_NONE);
}

void set_page_dirty_balance(struct page *page, int page_mkwrite)
@@ -674,7 +672,7 @@ void wakeup_flusher_threads(long nr_pages)
if (nr_pages == 0)
nr_pages = global_page_state(NR_FILE_DIRTY) +
global_page_state(NR_UNSTABLE_NFS);
- bdi_writeback_all(NULL, nr_pages);
+ bdi_writeback_all(NULL, nr_pages, WB_SYNC_NONE);
}

static void laptop_timer_fn(unsigned long unused);
--
Jens Axboe



\
 
 \ /
  Last update: 2009-05-22 22:47    [W:1.178 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site