Messages in this thread | | | Date | Sat, 2 May 2009 07:20:44 -0400 | Subject | Re: Probe Timeouts with 47afbaf5af9454a7a1a64591e20cbfcc27ca67a8 | From | Parag Warudkar <> |
| |
On 5/2/09, Johannes Berg <johannes@sipsolutions.net> wrote: > Parag, > >> Just got around to downloading today's compat-wireless and it doesn't >> work for me - frequent disconnects this time with response timeouts - >> >> 9731.902114] wlan1: RX ReassocResp from 00:1e:e5:6a:2c:c2 >> (capab=0x411 status=0 aid=1) >> [ 9731.902117] wlan1: associated >> [ 9886.744022] wlan1: no probe response from AP 00:1e:e5:6a:2c:c2 - >> disassociating >> [ 9887.594299] wlan1: authenticate with AP 00:1e:e5:6a:2c:c2 >> [ 9887.596953] wlan1: authenticated >> [ 9887.596958] wlan1: associate with AP 00:1e:e5:6a:2c:c2 >> [ 9887.600997] wlan1: RX ReassocResp from 00:1e:e5:6a:2c:c2 >> (capab=0x411 status=0 aid=1) >> [ 9887.601000] wlan1: associated >> [ 9930.640019] wlan1: no probe response from AP 00:1e:e5:6a:2c:c2 - >> disassociating > > This looks like something entirely different. > >> Of course mainline continues to work fine after reverting >> 47afbaf5af9454a7a1a64591e20cbfcc27ca67a8. > > Can you make sure the txpower is set correctly, on your compat? Just say > "iwconfig wlan0" or whatever _while_ associated -- and check that it > reports 15dBm or so.
It shows 27 dBm when associated - both for mainline and compat. Still get the disassociated messages.
wlan1 IEEE 802.11bgn ESSID:"pbwloft2" Mode:Managed Frequency:2.447 GHz Access Point: 00:1E:E5:6A:2C:C2 Bit Rate=1 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:21F9-23AF-AEBB-A427-4ADC-8596-C915-ADC8 [2] Security mode:open Power Management:on Link Quality=38/70 Signal level=-72 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Parag
| |