lkml.org 
[lkml]   [2009]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 5/7] [PATCH 5/8] can: SJA1000 generic platform bus driver
Hi Sascha,

Sascha Hauer wrote:
> Hi Wolfgang,
>
> some comments inline.
>
> Sascha
>
> On Tue, May 12, 2009 at 11:28:02AM +0200, Wolfgang Grandegger wrote:
>> This driver adds support for the SJA1000 chips connected to the
>> "platform bus", which can be found on various embedded systems.
>>
>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
>> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
>> Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
>> ---
>> drivers/net/can/Kconfig | 10 +
>> drivers/net/can/sja1000/Makefile | 1
>> drivers/net/can/sja1000/sja1000_platform.c | 169 +++++++++++++++++++++++++++++
>> include/linux/can/platform/sja1000.h | 32 +++++
>> 4 files changed, 212 insertions(+)
>> create mode 100644 drivers/net/can/sja1000/sja1000_platform.c
>> create mode 100644 include/linux/can/platform/sja1000.h
>>
>> Index: net-next-2.6/drivers/net/can/Kconfig
>> ===================================================================
>> --- net-next-2.6.orig/drivers/net/can/Kconfig 2009-05-12 10:47:25.747720647 +0200
>> +++ net-next-2.6/drivers/net/can/Kconfig 2009-05-12 10:47:26.411720627 +0200
>> @@ -41,6 +41,16 @@
>> ---help---
>> Driver for the SJA1000 CAN controllers from Philips or NXP
>>
>> +config CAN_SJA1000_PLATFORM
>> + depends on CAN_SJA1000
>> + tristate "Generic Platform Bus based SJA1000 driver"
>> + ---help---
>> + This driver adds support for the SJA1000 chips connected to
>> + the "platform bus" (Linux abstraction for directly to the
>> + processor attached devices). Which can be found on various
>> + boards from Phytec (http://www.phytec.de) like the PCM027,
>> + PCM038.
>> +
>> config CAN_DEBUG_DEVICES
>> bool "CAN devices debugging messages"
>> depends on CAN
>> Index: net-next-2.6/drivers/net/can/sja1000/Makefile
>> ===================================================================
>> --- net-next-2.6.orig/drivers/net/can/sja1000/Makefile 2009-05-12 10:47:25.753720385 +0200
>> +++ net-next-2.6/drivers/net/can/sja1000/Makefile 2009-05-12 10:47:26.412720490 +0200
>> @@ -3,5 +3,6 @@
>> #
>>
>> obj-$(CONFIG_CAN_SJA1000) += sja1000.o
>> +obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
>>
>> ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
>> Index: net-next-2.6/drivers/net/can/sja1000/sja1000_platform.c
>> ===================================================================
>> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
>> +++ net-next-2.6/drivers/net/can/sja1000/sja1000_platform.c 2009-05-12 10:47:26.416720502 +0200
>> @@ -0,0 +1,169 @@
>> +/*
>> + * Copyright (C) 2005 Sascha Hauer, Pengutronix
>> + * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the version 2 of the GNU General Public License
>> + * as published by the Free Software Foundation
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/netdevice.h>
>> +#include <linux/delay.h>
>> +#include <linux/pci.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/irq.h>
>> +#include <linux/can.h>
>> +#include <linux/can/dev.h>
>> +#include <linux/can/platform/sja1000.h>
>> +#include <linux/io.h>
>> +
>> +#include "sja1000.h"
>> +
>> +#define DRV_NAME "sja1000_platform"
>> +
>> +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
>> +MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the platform bus");
>> +MODULE_LICENSE("GPL v2");
>> +
>> +static u8 sp_read_reg(const struct net_device *dev, int reg)
>> +{
>> + return ioread8((void __iomem *)(dev->base_addr + reg));
>> +}
>> +
>> +static void sp_write_reg(const struct net_device *dev, int reg, u8 val)
>> +{
>> + iowrite8(val, (void __iomem *)(dev->base_addr + reg));
>> +}
>> +
>> +static int sp_probe(struct platform_device *pdev)
>> +{
>> + int err, irq;
>> + void __iomem *addr;
>> + struct net_device *dev;
>> + struct sja1000_priv *priv;
>> + struct resource *res_mem, *res_irq;
>> + struct sja1000_platform_data *pdata;
>> +
>> + pdata = pdev->dev.platform_data;
>> + if (!pdata) {
>> + dev_err(&pdev->dev, "No platform data provided!\n");
>> + err = -ENODEV;
>> + goto exit;
>> + }
>> +
>> + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>> + if (!res_mem || !res_irq) {
>> + err = -ENODEV;
>> + goto exit;
>> + }
>> +
>> + if (!request_mem_region(res_mem->start,
>> + res_mem->end - res_mem->start + 1,
>> + DRV_NAME)) {
>
> resource_size(res_mem) please, also for the other occurrences in this
> file

OK.

>> + err = -EBUSY;
>> + goto exit;
>> + }
>> +
>> + addr = ioremap_nocache(res_mem->start,
>> + res_mem->end - res_mem->start + 1);
>> + if (!addr) {
>> + err = -ENOMEM;
>> + goto exit_release;
>> + }
>> +
>> + irq = res_irq->start;
>> + if (res_irq->flags & IRQF_TRIGGER_MASK)
>> + set_irq_type(irq, res_irq->flags & IRQF_TRIGGER_MASK);
>
> You shouldn't use set_irq_type on not yet requested irqs but instead
> pass the flags to the real driver and pass them in request_irq.

Why? I would require an extra member in the struct sja1000_priv.

Wolfgang.


\
 
 \ /
  Last update: 2009-05-15 11:37    [W:0.093 / U:1.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site