lkml.org 
[lkml]   [2009]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    SubjectRe: Linux 2.6.30-rc1 boot failure on ia64 w/ QLA12160. Bisected.
    From
    Date
    On Tue, 2009-04-07 at 23:27 -0500, Robin Holt wrote:
    > On and ia64 system with a QLA12160 adapter, my boot fails with:
    >
    > qla1280: QLA12160 found on PCI bus 0, dev 3
    > qla1280 0001:00:03.0: PCI INT A -> GSI 61 (level, low) -> IRQ 61
    > scsi(0): Enabling SN2 PCI DMA dual channel lockup workaround
    > qla1280 0001:00:03.0: firmware: using built-in firmware qlogic/12160.bin
    > qla1280_mailbox_command: Command failed, mailbox0 = 0x0007, mailbox_out0 = 0x4003, istatus = 0x6000

    Does this fix it?

    diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
    index 351b56c..b6f8382 100644
    --- a/drivers/scsi/qla1280.c
    +++ b/drivers/scsi/qla1280.c
    @@ -1663,7 +1663,7 @@ qla1280_load_firmware_pio(struct scsi_qla_host
    *ha)

    /* Load RISC code. */
    risc_address = ha->fwstart;
    - fw_data = (const __le16 *)&fw->data[4];
    + fw_data = (const __le16 *)&fw->data[3];
    risc_code_size = (fw->size - 6) / 2;

    for (i = 0; i < risc_code_size; i++) {
    @@ -1722,7 +1722,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host
    *ha)

    /* Load RISC code. */
    risc_address = ha->fwstart;
    - fw_data = (const __le16 *)&fw->data[4];
    + fw_data = (const __le16 *)&fw->data[3];
    risc_code_size = (fw->size - 6) / 2;

    dprintk(1, "%s: DMA RISC code (%i) words\n",
    --
    dwmw2



    \
     
     \ /
      Last update: 2009-04-08 09:37    [W:0.025 / U:61.212 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site