lkml.org 
[lkml]   [2009]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH] fsldma: use PCI Read Multiple command
    David Hawkins wrote:

    > PRC_RM - PCI read multiple
    > The default PCI read command used by the DMA controller is
    > PCI Read (PCI command 6h). When the burst length is 32-bytes
    > or longer, PCI Read Line (PCI command Eh) is used (undocumented
    > feature of the controller). Using PCI read multiple
    > (PCI command Ch) results in high-performance across PCI
    > bridges. DMA transfers to non-prefetchable PCI registers
    > should not result in prefetched reads, even when using
    > the PCI read multiple command.

    I was thinking more along the lines of:

    "This driver tells the DMA controller to use the PCI Read Multiple
    command, instead of the PCI Read Line command, for PCI read operations.
    Please be aware that this setting may result in read pre-fetching on
    some platforms."

    --
    Timur Tabi
    Linux kernel developer at Freescale


    \
     
     \ /
      Last update: 2009-04-27 22:29    [W:0.021 / U:30.552 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site