lkml.org 
[lkml]   [2009]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[v0 PATCH 3/5] EDAC: Add CPC925 driver Kconfig & Makefile
    Date
    Introduce Kconfig and Makefile options for CPC925 EDAC driver.

    Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
    ---
    drivers/edac/Kconfig | 9 +++++++++
    drivers/edac/Makefile | 1 +
    2 files changed, 10 insertions(+)

    --- a/drivers/edac/Kconfig
    +++ b/drivers/edac/Kconfig
    @@ -188,4 +188,13 @@ config EDAC_AMD8131
    Support for error detection and correction on the
    AMD8131 HyperTransport PCI-X Tunnel chip.

    +config EDAC_CPC925
    + tristate "IBM CPC925 Memory Controller (PPC970FX)"
    + depends on EDAC_MM_EDAC
    + help
    + Support for error detection and correction on the
    + IBM CPC925 Bridge and Memory Controller, which is
    + a companion chip to the PowerPC 970 family of
    + processors.
    +
    endif # EDAC
    --- a/drivers/edac/Makefile
    +++ b/drivers/edac/Makefile
    @@ -36,4 +36,5 @@ obj-$(CONFIG_EDAC_MV64X60) += mv64x60_e
    obj-$(CONFIG_EDAC_CELL) += cell_edac.o
    obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o
    obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o
    +obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o


    \
     
     \ /
      Last update: 2009-04-02 08:13    [W:0.021 / U:242.812 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site