lkml.org 
[lkml]   [2009]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [RFC][PATCH 7/8] Convert sparc to use arch_getoffset() infrastructure.
From
Date
Hey Dave,
You acked this patch earlier, but I've just tried building with a
cross-compiler environment I had access to and had problems getting it
to build.

It seems the pci_do_get/settimeofday() and the bus_do_get/settimeofday()
redirection code is causing some trouble. I'm really not sure how the
BTFIXUPSET_CALL code works, so I don't want to just kill it off.

Any advice here on how to do this right?

thanks
-john


This patch converts sparc to use GENERIC_TIME via the arch_getoffset()
infrastructure

NOT FOR INCLUSION
Signed-off-by: John Stultz <johnstul@us.ibm.com>

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index cc12cd4..1358aab 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -55,8 +55,11 @@ config BITS
default 64 if SPARC64

config GENERIC_TIME
+ def_bool y
+
+config ARCH_USES_GETTIMEOFFSET
bool
- default y if SPARC64
+ default y if SPARC32

config GENERIC_CMOS_UPDATE
bool
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index 614ac7b..e946b55 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -227,7 +227,7 @@ void __init time_init(void)
sbus_time_init();
}

-static inline unsigned long do_gettimeoffset(void)
+u32 arch_gettimeoffset(void)
{
unsigned long val = *master_l10_counter;
unsigned long usec = (val >> 10) & 0x1fffff;
@@ -236,84 +236,7 @@ static inline unsigned long do_gettimeoffset(void)
if (val & 0x80000000)
usec += 1000000 / HZ;

- return usec;
-}
-
-/* Ok, my cute asm atomicity trick doesn't work anymore.
- * There are just too many variables that need to be protected
- * now (both members of xtime, et al.)
- */
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
- unsigned long max_ntp_tick = tick_usec - tickadj;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = do_gettimeoffset();
-
- /*
- * If time_adjust is negative then NTP is slowing the clock
- * so make sure not to go into next possible interval.
- * Better to lose some accuracy than have time go backwards..
- */
- if (unlikely(time_adjust < 0))
- usec = min(usec, max_ntp_tick);
-
- sec = xtime.tv_sec;
- usec += (xtime.tv_nsec / 1000);
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
- int ret;
-
- write_seqlock_irq(&xtime_lock);
- ret = bus_do_settimeofday(tv);
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
- return ret;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-static int sbus_do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- nsec -= 1000 * do_gettimeoffset();
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- ntp_clear();
- return 0;
+ return usec * 1000;
}

static int set_rtc_mmss(unsigned long secs)



\
 
 \ /
  Last update: 2009-04-15 03:53    [W:0.077 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site