lkml.org 
[lkml]   [2009]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [patch 2.6.29-rc6+misc] MMC: regulator utilities
From
Date
On Sun, 2009-03-08 at 22:49 +0100, Pierre Ossman wrote:
> On Sun, 8 Mar 2009 12:34:25 -0800
> David Brownell <david-b@pacbell.net> wrote:
>
> > On Sunday 08 March 2009, Pierre Ossman wrote:
> > > Looks good. Now what should I do with it? Merge it in the next window
> > > good enough?
> >
> > Well, after testing the previously-untested call ... here's
> > another update.
> >
> > Since these depend on new calls in the regulator framework,
> > it can't merge until after they merge (in the next window).
> > Least hassle for you would be if this merges through the
> > regulator framework (with your ack), I suspect.
> >
> > - Dave
> >
> >
> > ======== CUT HERE
> > From: David Brownell <dbrownell@users.sourceforge.net>
> >
> > Glue between MMC and regulator stacks ... verified with
> > some OMAP3 boards using adjustable and configured-as-fixed
> > regulators on several MMC controllers.
> >
> > These calls are intended to be used by MMC host adapters
> > using at least one regulator per host. Examples include
> > slots with regulators supporting multiple voltages and
> > ones using multiple voltage rails (e.g. DAT4..DAT7 using a
> > separate supply, or a split rail chip like certain SDIO
> > WLAN or eMMC solutions).
> >
> > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> > ---
>
> Acked-by: Pierre Ossman <drzeus@drzeus.cx>
>

Applied.

Thanks

Liam



\
 
 \ /
  Last update: 2009-03-09 12:55    [W:0.055 / U:27.976 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site