Messages in this thread | | | Date | Sun, 8 Mar 2009 22:49:07 +0100 | From | Pierre Ossman <> | Subject | Re: [patch 2.6.29-rc6+misc] MMC: regulator utilities |
| |
On Sun, 8 Mar 2009 12:34:25 -0800 David Brownell <david-b@pacbell.net> wrote:
> On Sunday 08 March 2009, Pierre Ossman wrote: > > Looks good. Now what should I do with it? Merge it in the next window > > good enough? > > Well, after testing the previously-untested call ... here's > another update. > > Since these depend on new calls in the regulator framework, > it can't merge until after they merge (in the next window). > Least hassle for you would be if this merges through the > regulator framework (with your ack), I suspect. > > - Dave > > > ======== CUT HERE > From: David Brownell <dbrownell@users.sourceforge.net> > > Glue between MMC and regulator stacks ... verified with > some OMAP3 boards using adjustable and configured-as-fixed > regulators on several MMC controllers. > > These calls are intended to be used by MMC host adapters > using at least one regulator per host. Examples include > slots with regulators supporting multiple voltages and > ones using multiple voltage rails (e.g. DAT4..DAT7 using a > separate supply, or a split rail chip like certain SDIO > WLAN or eMMC solutions). > > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> > ---
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
-- -- Pierre Ossman
Linux kernel, MMC maintainer http://www.kernel.org rdesktop, core developer http://www.rdesktop.org
WARNING: This correspondence is being monitored by the Swedish government. Make sure your server uses encryption for SMTP traffic and consider using PGP for end-to-end encryption.
| |