lkml.org 
[lkml]   [2009]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] cpm_uart: fix non-console port startup bug
Date
  After UART interrupt handler is installed and rx is enabled, if an rx
interrupt comes before hardware init, rx->cur will be updated. Then the
hardware init will reset BD and make rx->cur out of sync, move the hardware
init code before request_irq.

Signed-off-by: Xiaotian Feng <xiaotian.feng@windriver.com>
---
drivers/serial/cpm_uart/cpm_uart_core.c | 14 ++++++++++++--
1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index bde4b4b..5c6ef51 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -406,6 +406,18 @@ static int cpm_uart_startup(struct uart_port *port)

pr_debug("CPM uart[%d]:startup\n", port->line);

+ /* If the port is not the console, make sure rx is disabled. */
+ if (!(pinfo->flags & FLAG_CONSOLE)) {
+ /* Disable UART rx */
+ if (IS_SMC(pinfo)) {
+ clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN);
+ clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX);
+ } else {
+ clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR);
+ clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
+ }
+ cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
+ }
/* Install interrupt handler. */
retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port);
if (retval)
@@ -420,8 +432,6 @@ static int cpm_uart_startup(struct uart_port *port)
setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT));
}

- if (!(pinfo->flags & FLAG_CONSOLE))
- cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
return 0;
}

--
1.5.5.1


\
 
 \ /
  Last update: 2009-03-06 04:01    [W:0.036 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site