lkml.org 
[lkml]   [2009]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: fastboot/async and initramfs: How am I supposed to know when devices are finished initializing?
Arjan van de Ven schrieb:
>> Among other things, this loads the ata_piix on my machine. On older
>> kernels I could assume that after these commands, /dev/sda* existed
>
> not if you have CONFIG_SCSI_SCAN_ASYNC set though..
>
>> and I could immediately access them (in my case, I run cryptsetup on
>> /dev/sda6). But now, the devices don't exist here, but are only
>> created a second or so later. As a result, the initramfs script has
>> already bailed out as it couldn't find /dev/sda6 and assumed that the
>> hard drive didn't exist.
>
> the CONFIG_SCSI_WAIT_SCAN method (basically loading that module to wait
> for the scans to finish) will work for you......

Thanks, I will integrate that into our initramfs. Will that also work
for USB mass storage (which was already problematic with older kernels,
you load the module you don't know how long it takes until the sdX
devices are created)?
Can I load that module before loading the actual SCSI/SATA/PATA driver?

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2009-03-29 18:47    [W:0.152 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site