lkml.org 
[lkml]   [2009]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 11/11] mmc: Add OpenFirmware bindings for SDHCI driver
Hi 

Thank you for your reply again.

>Ah, then it must be connected via MPC8347's localbus.

That's right.

I will try it,and I inform them of the result.

>On Sat, Mar 21, 2009 at 09:15:25AM +0900, yamazaki wrote:
>> Hi
>>
>> Thank you for your reply.
>> I know RICOH has PCI SD/MMC controller. But R5C807 RICOH is not the PCI device
>> which is probably new product.
>
>Ah, then it must be connected via MPC8347's localbus.
>
>Well, then you need 2.6.29-rcX kernels, for example
>http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
>is suitable.
>
>Untar it and apply the patches (they'll apply fine on that
>kernel). Then you'll need some device tree additions for
>your MPC8347 board, something like this:
>
> localbus@e0005000 {
> #address-cells = <2>;
> #size-cells = <1>;
> compatible = "fsl,mpc8347-localbus",
> "fsl,pq2pro-localbus";
> reg = <0xe0005000 0xd8>;
> ranges = <0x1 0x0 0xf0000000 0x1000>;
> // ^^ change the 0xf0000000 to the actual address
> sdhci@1,0 {
> compatible = "ricoh,r5c807", "generic-sdhci";
> reg = <0x1 0x0 0x1000>;
> interrupts = <ricoh-interrupt-here 0x8>;
> interrupt-parent = <&ipic>;
> // if needed, clock-frequency = <freq-in-HZ-here>;
> };
> };
>
>Note that I'm not sure what endiannes you'll get when connecting
>the ricoh chip to the big-endinan host...
>
>--
>Anton Vorontsov
>email: cbouatmailru@gmail.com
>irc://irc.freenode.net/bd2

----
yamazaki-seiji@jcom.home.ne.jp


\
 
 \ /
  Last update: 2009-03-21 08:49    [W:0.075 / U:6.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site