lkml.org 
[lkml]   [2009]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: x86-microcode: get rid of set_cpus_allowed()
Date
On Tuesday 10 March 2009 06:08:59 Dmitry Adamushko wrote:
>
> Hi,
>
>
> here is a possible candidate for Rusty's cpumask-refactored series.
> Note the [*] remark below though.

Ah, OK, I'll drop my version then (below) in favor of this, and will
push to Ingo with the others if he doesn't take it directly.

Thanks!
Rusty.

cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c

Impact: don't play with current's cpumask

Straightforward indirection through work_on_cpu(). One change is that
the error code from microcode_update_cpu() is now actually plumbed back
to microcode_init_cpu(), so now we printk if it fails on cpu hotplug.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
arch/x86/kernel/microcode_core.c | 106 ++++++++++++++++++++++-----------------
1 file changed, 61 insertions(+), 45 deletions(-)

diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -108,29 +108,40 @@ EXPORT_SYMBOL_GPL(ucode_cpu_info);
EXPORT_SYMBOL_GPL(ucode_cpu_info);

#ifdef CONFIG_MICROCODE_OLD_INTERFACE
+struct update_for_cpu {
+ const void __user *buf;
+ size_t size;
+};
+
+static long update_for_cpu(void *_ufc)
+{
+ struct update_for_cpu *ufc = _ufc;
+ int error;
+
+ error = microcode_ops->request_microcode_user(smp_processor_id(),
+ ufc->buf, ufc->size);
+ if (error < 0)
+ return error;
+ if (!error)
+ microcode_ops->apply_microcode(smp_processor_id());
+ return error;
+}
+
static int do_microcode_update(const void __user *buf, size_t size)
{
- cpumask_t old;
int error = 0;
int cpu;
-
- old = current->cpus_allowed;
+ struct update_for_cpu ufc = { .buf = buf, .size = size };

for_each_online_cpu(cpu) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;

if (!uci->valid)
continue;
-
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
- error = microcode_ops->request_microcode_user(cpu, buf, size);
+ error = work_on_cpu(cpu, update_for_cpu, &ufc);
if (error < 0)
- goto out;
- if (!error)
- microcode_ops->apply_microcode(cpu);
+ break;
}
-out:
- set_cpus_allowed_ptr(current, &old);
return error;
}

@@ -205,11 +216,26 @@ MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
/* fake device for request_firmware */
static struct platform_device *microcode_pdev;

+static long reload_for_cpu(void *unused)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + smp_processor_id();
+ int err = 0;
+
+ mutex_lock(&microcode_mutex);
+ if (uci->valid) {
+ err = microcode_ops->request_microcode_fw(smp_processor_id(),
+ &microcode_pdev->dev);
+ if (!err)
+ microcode_ops->apply_microcode(smp_processor_id());
+ }
+ mutex_unlock(&microcode_mutex);
+ return err;
+}
+
static ssize_t reload_store(struct sys_device *dev,
struct sysdev_attribute *attr,
const char *buf, size_t sz)
{
- struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
char *end;
unsigned long val = simple_strtoul(buf, &end, 0);
int err = 0;
@@ -218,21 +244,9 @@ static ssize_t reload_store(struct sys_d
if (end == buf)
return -EINVAL;
if (val == 1) {
- cpumask_t old = current->cpus_allowed;
-
get_online_cpus();
- if (cpu_online(cpu)) {
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
- mutex_lock(&microcode_mutex);
- if (uci->valid) {
- err = microcode_ops->request_microcode_fw(cpu,
- &microcode_pdev->dev);
- if (!err)
- microcode_ops->apply_microcode(cpu);
- }
- mutex_unlock(&microcode_mutex);
- set_cpus_allowed_ptr(current, &old);
- }
+ if (cpu_online(cpu))
+ err = work_on_cpu(cpu, reload_for_cpu, NULL);
put_online_cpus();
}
if (err)
@@ -328,9 +342,9 @@ static int microcode_resume_cpu(int cpu)
return 0;
}

-static void microcode_update_cpu(int cpu)
+static long microcode_update_cpu(void *unused)
{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ struct ucode_cpu_info *uci = ucode_cpu_info + smp_processor_id();
int err = 0;

/*
@@ -338,30 +352,27 @@ static void microcode_update_cpu(int cpu
* otherwise just request a firmware:
*/
if (uci->valid) {
- err = microcode_resume_cpu(cpu);
+ err = microcode_resume_cpu(smp_processor_id());
} else {
- collect_cpu_info(cpu);
+ collect_cpu_info(smp_processor_id());
if (uci->valid && system_state == SYSTEM_RUNNING)
- err = microcode_ops->request_microcode_fw(cpu,
+ err = microcode_ops->request_microcode_fw(
+ smp_processor_id(),
&microcode_pdev->dev);
}
if (!err)
- microcode_ops->apply_microcode(cpu);
+ microcode_ops->apply_microcode(smp_processor_id());
+ return err;
}

-static void microcode_init_cpu(int cpu)
+static int microcode_init_cpu(int cpu)
{
- cpumask_t old = current->cpus_allowed;
-
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
- /* We should bind the task to the CPU */
- BUG_ON(raw_smp_processor_id() != cpu);
-
+ int err;
mutex_lock(&microcode_mutex);
- microcode_update_cpu(cpu);
+ err = work_on_cpu(cpu, microcode_update_cpu, NULL);
mutex_unlock(&microcode_mutex);

- set_cpus_allowed_ptr(current, &old);
+ return err;
}

static int mc_sysdev_add(struct sys_device *sys_dev)
@@ -379,8 +390,11 @@ static int mc_sysdev_add(struct sys_devi
if (err)
return err;

- microcode_init_cpu(cpu);
- return 0;
+ err = microcode_init_cpu(cpu);
+ if (err)
+ sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+
+ return err;
}

static int mc_sysdev_remove(struct sys_device *sys_dev)
@@ -404,7 +418,7 @@ static int mc_sysdev_resume(struct sys_d
return 0;

/* only CPU 0 will apply ucode here */
- microcode_update_cpu(0);
+ microcode_update_cpu(NULL);
return 0;
}

@@ -424,7 +438,9 @@ mc_cpu_callback(struct notifier_block *n
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
- microcode_init_cpu(cpu);
+ if (microcode_init_cpu(cpu))
+ printk(KERN_ERR "microcode: failed to init CPU%d\n",
+ cpu);
case CPU_DOWN_FAILED:
case CPU_DOWN_FAILED_FROZEN:
pr_debug("microcode: CPU%d added\n", cpu);



\
 
 \ /
  Last update: 2009-03-11 07:47    [W:0.052 / U:3.324 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site