lkml.org 
[lkml]   [2009]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: Error testing ext3 on brd ramdisk
On Tue, Mar 10, 2009 at 05:12:47PM +0100, Nick Piggin wrote:
> On Thu, Mar 05, 2009 at 01:12:25PM +0100, Jorge Boncompte [DTI2] wrote:
> > Jorge Boncompte [DTI2] escribió:
> > >Ok. I have modified the script to do...
> > >------------
> > >mount -no remount,ro /dev/ram0
> > >dd if=/dev/ram0 of=/tmp/config.bin bs=1k count=1000
> > >fsck.minix -fv /tmp/config.bin
> > >if [ $? != 0 ]; then
> > > echo "FATAL: Filesystem is corrupted"
> > > exit 2
> > >fi
> > >mount -no remount,rw /dev/ram0
> > >md5sum config.bin
> > >dd if=config.bin of=/dev/hda1
> > >echo $md5sum | dd of=/dev/hda1 bs=1k seek=1100 count=32
> > >------------
> > >... after some cycles of modifying files on the filesystem and trying to
> > >save it to disk...
> > >------------------
> > >fsck.minix: BusyBox v1.8.2 (2008-12-03 14:24:56 CET)
> > >Forcing filesystem check on /tmp/config.bin
> > >Unused inode 198 is marked as 'used' in the bitmap.
> > >Zone 393 is marked 'in use', but no file uses it.
> > >Zone 394 is marked 'in use', but no file uses it.
> > >
> > > 198 inodes used (58%)
> > > 395 zones used (39%)
> > >
> > > 163 regular files
> > > 24 directories
> > > 0 character device files
> > > 0 block device files
> > > 0 links
> > > 10 symbolic links
> > >------
> > > 197 files
> > >FATAL: Filesystem is corrupted
> > >-------------------
> > >
> >
> > If after getting the "FATAL: Filesystem is corrupted" message I do
> > "echo 3 > /proc/sys/vm/drop_caches" and rerun the script the filesystem
> > somehow got magically fixed (I mean fsck.minix does not report errors
> > and the image gets written to disk well ;-)
>
> OK, I can reproduce this. It really does seem to be due to buffercache
> going out of coherency for some reason, so the trick is that you have
> to fsck it while you have it mounted ro before remounting rw then modifying
> it then remounting ro and fscking again (the first fsck must bring in
> uptodate buffercache, and something is not being correctly invalidated).
>
> It is also not brd or minix specific -- I reproduced it with loop driver
> and ext2 too, and probably regular disk driver will have the same problem
> (ie. it is something in the buffercache).
>
> I don't know if this is the same problem as the ext3 issue -- the recipe
> for reproducing ext3 problem includes umount, which will invalidate all
> the buffercache unless something is holding the bdev open. But anyway I
> am making some progress with this problem so I will try solve it first.
>
> I can't think of any good reason why buffercache should be going out of
> sync here...

Ah, of course, it would be due to directory-in-pagecache. You need
the following patch if you expect this to work.

And that confirms the ext3 problem is a different one because it
doesn't use directory in pagecache I think. Well, I'll look at
that one tomorrow.

Thanks,
Nick

---
fs/super.c | 2 ++
1 file changed, 2 insertions(+)

Index: linux-2.6/fs/super.c
===================================================================
--- linux-2.6.orig/fs/super.c
+++ linux-2.6/fs/super.c
@@ -644,6 +644,8 @@ int do_remount_sb(struct super_block *sb
acct_auto_close(sb);
shrink_dcache_sb(sb);
fsync_super(sb);
+ if (flags & MS_RDONLY)
+ invalidate_bdev(sb->s_bdev);

/* If we are remounting RDONLY and current sb is read/write,
make sure there are no rw files opened */

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-03-10 17:33    [W:0.611 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site