lkml.org 
[lkml]   [2009]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: WOL with forcedeth broken since f55c21fd9a92a444e55ad1ca4e4732d56661bf2e
    Hello!

    On Thu, Jan 29, 2009 at 10:53:40PM -0800, Yinghai Lu wrote:
    > can not find the reason why the WOL doesn't work...
    >
    > please post
    > 1. boot log for just after AC is pluged-in... ===> you should have
    > "nv_probe: set workaround bit for reversed mac addr"
    > 2. and boot log after boot from WOL...==> you have have "nv_probe: set
    > workaround bit for reversed mac addr" too.

    On Wed, Feb 04, 2009 at 11:58:53AM +0100, Rafael J. Wysocki wrote:
    > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12614
    > Subject : WOL with forcedeth broken since f55c21fd9a92a444e55ad1ca4e4732d56661bf2e
    > Submitter : Philipp Matthias Hahn <pmhahn@titan.lahn.de>
    > Date : 2009-01-29 6:31 (7 days old)
    > References : http://marc.info/?l=linux-kernel&m=123321232825316&w=4
    > Handled-By : Yinghai Lu <yinghai@kernel.org>
    > Patch : http://marc.info/?l=linux-kernel&m=123330459229248&w=4

    Strage, at the moment I can't seem to reproduce the problem. I've
    switched back to the version of 2.6.28.3 and now it seems to work.
    I'll continue with tesing.

    Some additional data:
    The BIOS-upgrade tool (Afud408.exe) resets the MAC address. I had to run
    the tool a second time to re-programm the MAC-address using its /M
    option. I useed the unreversed MAC-address back than.
    I also tried the reversed address once, but after that forcedeth.c
    complained about a wrong MAC-address.

    If I completely turn off the power (pull the plug), WOL doesn't work,
    even when it's enabled in the BIOS.

    Only after I'v started Linux, do "echo NMAC > /proc/acpi/wakeup" and
    "ethtool -s eth0 wol g" does it work again.

    Nether the less here's the output of dmesg:
    forcedeth: Reverse Engineered nFoce ethernet driver. Version 0.61.
    ACPI: PCI Interrupt Link [LMAC] enables at IRQ 23
    forcedeth: 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
    forcedeth: 0000:00:14.0: setting latency timer to 64
    * nv_probe: MAC_ADDR_REV ELSE
    nv_probe: set workaround bit for reversed mac addr
    forcedeth: 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:db:f2:e1:35
    forcedeth: 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
    The line maked * was inserted by me in the source file for my debugging.

    BYtE
    Philipp Hahn
    --
    / / (_)__ __ ____ __ Philipp Hahn
    / /__/ / _ \/ // /\ \/ /
    /____/_/_//_/\_,_/ /_/\_\ pmhahn@titan.lahn.de


    \
     
     \ /
      Last update: 2009-02-06 00:27    [W:0.022 / U:0.912 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site