lkml.org 
[lkml]   [2009]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: mpt fusion broken sometime since 2.6.24
    On Tue, 17 Feb 2009, david@lang.hm wrote:

    > On Tue, 17 Feb 2009, Yinghai Lu wrote:
    >
    >> Date: Tue, 17 Feb 2009 19:28:59 -0800
    >> From: Yinghai Lu <yinghai@kernel.org>
    >> To: david@lang.hm
    >> Cc: Matthew Wilcox <matthew@wil.cx>,
    >> linux-kernel <linux-kernel@vger.kernel.org>,
    >> linux-scsi@vger.kernel.org,
    >> DL-MPTFusionLinux@lsi.com
    >> Subject: Re: mpt fusion broken sometime since 2.6.24
    >>
    >> david@lang.hm wrote:
    >>> On Tue, 17 Feb 2009, Yinghai Lu wrote:
    >>>
    >>>> david@lang.hm wrote:
    >>>>> On Tue, 17 Feb 2009, david@lang.hm wrote:
    >>>>>
    >>>>>>> do you have chance to try current tip/master
    >>>>>>> http://people.redhat.com/mingo/tip.git/readme.txt
    >>>>>>> or 2.6.29-rcX
    >>>>>>> plus following patch?
    >>>>>>
    >>>>>> I will see about trying this.
    >>>>>
    >>>>> does the fact that I am compiling a monolithic kernel (no modules) make
    >>>>> any difference related to the patch below?
    >>>>
    >>>> please try this patch too. wonder if your BIOS does enable the HT MSI ...
    >>>
    >>> this does solve the problem.
    >>
    >> can you send out boot log?
    >
    > attached

    firmware on the card is showing 6.12.0

    what is the harm on other systems if I put the mptbase.mpt_msi_enable=0
    into my base config image?

    David LangLinux version 2.6.29-rc5.SMP.K8-64-00122-g5955c7a-dirty (root@secdev) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #21 SMP Tue Feb 17 18:41:12 PST 2009
    Command line: auto BOOT_IMAGE=test2 ro root=803 console=ttyS1,9600n8 console=tty1
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 0000000000093800 (usable)
    BIOS-e820: 0000000000093800 - 0000000000094c00 (reserved)
    BIOS-e820: 00000000000eadc0 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
    BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data)
    BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000820000000 (usable)
    DMI present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    last_pfn = 0x820000 max_arch_pfn = 0x100000000
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    last_pfn = 0xdfff0 max_arch_pfn = 0x100000000
    init_memory_mapping: 0000000000000000-00000000dfff0000
    0000000000 - 00dfe00000 page 2M
    00dfe00000 - 00dfff0000 page 4k
    kernel direct mapping tables up to dfff0000 @ 10000-16000
    last_map_addr: dfff0000 end: dfff0000
    init_memory_mapping: 0000000100000000-0000000820000000
    0100000000 - 0820000000 page 2M
    kernel direct mapping tables up to 820000000 @ 14000-36000
    last_map_addr: 820000000 end: 820000000
    ACPI: RSDP 000F9440, 0014 (r0 ACPIAM)
    ACPI: RSDT DFFF0000, 0034 (r1 A M I OEMRSDT 6000714 MSFT 97)
    ACPI: FACP DFFF0200, 0084 (r2 A M I OEMFACP 6000714 MSFT 97)
    FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
    ACPI: DSDT DFFF0440, 5218 (r1 WTF4V WTF4V034 34 INTL 2002026)
    ACPI: FACS DFFFE000, 0040
    ACPI: APIC DFFF0390, 00B0 (r1 A M I OEMAPIC 6000714 MSFT 97)
    ACPI: OEMB DFFFE040, 0063 (r1 A M I AMI_OEM 6000714 MSFT 97)
    ACPI: SRAT DFFF5660, 01A0 (r1 AMD HAMMER 1 AMD 1)
    ACPI: Local APIC address 0xfee00000
    SRAT: PXM 0 -> APIC 0 -> Node 0
    SRAT: PXM 0 -> APIC 1 -> Node 0
    SRAT: PXM 1 -> APIC 2 -> Node 1
    SRAT: PXM 1 -> APIC 3 -> Node 1
    SRAT: PXM 2 -> APIC 4 -> Node 2
    SRAT: PXM 2 -> APIC 5 -> Node 2
    SRAT: PXM 3 -> APIC 6 -> Node 3
    SRAT: PXM 3 -> APIC 7 -> Node 3
    SRAT: Node 0 PXM 0 0-a0000
    SRAT: Node 0 PXM 0 100000-e0000000
    SRAT: Node 0 PXM 0 100000000-220000000
    SRAT: Node 1 PXM 1 220000000-420000000
    SRAT: Node 2 PXM 2 420000000-620000000
    SRAT: Node 3 PXM 3 620000000-820000000
    NUMA: Allocated memnodemap from 31000 - 41440
    NUMA: Using 20 for the hash shift.
    Bootmem setup node 0 0000000000000000-0000000220000000
    NODE_DATA [0000000000041440 - 000000000004343f]
    bootmap [0000000000044000 - 0000000000087fff] pages 44
    (7 early reservations) ==> bootmem [0000000000 - 0220000000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 0000975dc4] TEXT DATA BSS ==> [0000200000 - 0000975dc4]
    #3 [0000093c00 - 0000100000] BIOS reserved ==> [0000093c00 - 0000100000]
    #4 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
    #5 [0000014000 - 0000031000] PGTABLE ==> [0000014000 - 0000031000]
    #6 [0000031000 - 0000041440] MEMNODEMAP ==> [0000031000 - 0000041440]
    Bootmem setup node 1 0000000220000000-0000000420000000
    NODE_DATA [0000000220000000 - 0000000220001fff]
    bootmap [0000000220002000 - 0000000220041fff] pages 40
    (7 early reservations) ==> bootmem [0220000000 - 0420000000]
    #0 [0000000000 - 0000001000] BIOS data page
    #1 [0000006000 - 0000008000] TRAMPOLINE
    #2 [0000200000 - 0000975dc4] TEXT DATA BSS
    #3 [0000093c00 - 0000100000] BIOS reserved
    #4 [0000010000 - 0000014000] PGTABLE
    #5 [0000014000 - 0000031000] PGTABLE
    #6 [0000031000 - 0000041440] MEMNODEMAP
    Bootmem setup node 2 0000000420000000-0000000620000000
    NODE_DATA [0000000420000000 - 0000000420001fff]
    bootmap [0000000420002000 - 0000000420041fff] pages 40
    (7 early reservations) ==> bootmem [0420000000 - 0620000000]
    #0 [0000000000 - 0000001000] BIOS data page
    #1 [0000006000 - 0000008000] TRAMPOLINE
    #2 [0000200000 - 0000975dc4] TEXT DATA BSS
    #3 [0000093c00 - 0000100000] BIOS reserved
    #4 [0000010000 - 0000014000] PGTABLE
    #5 [0000014000 - 0000031000] PGTABLE
    #6 [0000031000 - 0000041440] MEMNODEMAP
    Bootmem setup node 3 0000000620000000-0000000820000000
    NODE_DATA [0000000620000000 - 0000000620001fff]
    bootmap [0000000620002000 - 0000000620041fff] pages 40
    (7 early reservations) ==> bootmem [0620000000 - 0820000000]
    #0 [0000000000 - 0000001000] BIOS data page
    #1 [0000006000 - 0000008000] TRAMPOLINE
    #2 [0000200000 - 0000975dc4] TEXT DATA BSS
    #3 [0000093c00 - 0000100000] BIOS reserved
    #4 [0000010000 - 0000014000] PGTABLE
    #5 [0000014000 - 0000031000] PGTABLE
    #6 [0000031000 - 0000041440] MEMNODEMAP
    found SMP MP-table at [ffff8800000ff780] 000ff780
    [ffffe20007700000-ffffe200077fffff] potential offnode page_structs
    [ffffe20000000000-ffffe200077fffff] PMD -> [ffff880028200000-ffff88002f3fffff] on node 0
    [ffffe2000e700000-ffffe2000e7fffff] potential offnode page_structs
    [ffffe20007800000-ffffe2000e7fffff] PMD -> [ffff880220200000-ffff8802271fffff] on node 1
    [ffffe20015700000-ffffe200157fffff] potential offnode page_structs
    [ffffe2000e800000-ffffe200157fffff] PMD -> [ffff880420200000-ffff8804271fffff] on node 2
    [ffffe20015800000-ffffe2001c7fffff] PMD -> [ffff880620200000-ffff8806271fffff] on node 3
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00820000
    Movable zone start PFN for each node
    early_node_map[6] active PFN ranges
    0: 0x00000010 -> 0x00000093
    0: 0x00000100 -> 0x000dfff0
    0: 0x00100000 -> 0x00220000
    1: 0x00220000 -> 0x00420000
    2: 0x00420000 -> 0x00620000
    3: 0x00620000 -> 0x00820000
    On node 0 totalpages: 2097011
    DMA zone: 56 pages used for memmap
    DMA zone: 2071 pages reserved
    DMA zone: 1844 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 899112 pages, LIFO batch:31
    Normal zone: 16128 pages used for memmap
    Normal zone: 1163520 pages, LIFO batch:31
    On node 1 totalpages: 2097152
    Normal zone: 28672 pages used for memmap
    Normal zone: 2068480 pages, LIFO batch:31
    On node 2 totalpages: 2097152
    Normal zone: 28672 pages used for memmap
    Normal zone: 2068480 pages, LIFO batch:31
    On node 3 totalpages: 2097152
    Normal zone: 28672 pages used for memmap
    Normal zone: 2068480 pages, LIFO batch:31
    Nvidia board detected. Ignoring ACPI timer override.
    If you got timer trouble try acpi_use_timer_override
    Detected use of extended apic ids on hypertransport bus
    Detected use of extended apic ids on hypertransport bus
    Detected use of extended apic ids on hypertransport bus
    Detected use of extended apic ids on hypertransport bus
    ACPI: PM-Timer IO Port: 0x2008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
    ACPI: IOAPIC (id[0x09] address[0xfebfc000] gsi_base[24])
    IOAPIC[1]: apic_id 9, version 0, address 0xfebfc000, GSI 24-47
    ACPI: IOAPIC (id[0x0a] address[0xfebfe000] gsi_base[72])
    IOAPIC[2]: apic_id 10, version 0, address 0xfebfe000, GSI 72-78
    ACPI: IOAPIC (id[0x0b] address[0xfebff000] gsi_base[79])
    IOAPIC[3]: apic_id 11, version 0, address 0xfebff000, GSI 79-85
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: BIOS IRQ0 pin2 override ignored.
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 8 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 86
    Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
    NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:4
    PERCPU: Allocating 40960 bytes of per cpu data
    Built 4 zonelists in Zone order, mobility grouping on. Total pages: 8269916
    Policy zone: Normal
    Kernel command line: auto BOOT_IMAGE=test2 ro root=803 console=ttyS1,9600n8 console=tty1
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Fast TSC calibration using PIT
    Detected 2814.492 MHz processor.
    spurious 8259A interrupt: IRQ7.
    Console: colour VGA+ 80x25
    console [tty1] enabled
    console [ttyS1] enabled
    Checking aperture...
    No AGP bridge found
    Node 0: aperture @ f4000000 size 64 MB
    Node 1: aperture @ f4000000 size 64 MB
    Node 2: aperture @ f4000000 size 64 MB
    Node 3: aperture @ f4000000 size 64 MB
    Memory: 33084308k/34078720k available (3910k kernel code, 524852k absent, 469560k reserved, 1814k data, 372k init)
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.98 BogoMIPS (lpj=11257968)
    Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
    Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    Mount-cache hash table entries: 256
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 0/0x0 -> Node 0
    tseg: 0000000000
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    using C1E aware idle routine
    ACPI: Core revision 20081204
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    CPU0: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 5629.23 BogoMIPS (lpj=11258478)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 1/0x1 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
    Booting processor 2 APIC 0x2 ip 0x6000
    Initializing CPU#2
    Calibrating delay using timer specific routine.. 5629.24 BogoMIPS (lpj=11258499)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 2/0x2 -> Node 1
    CPU: Physical Processor ID: 1
    CPU: Processor Core ID: 0
    x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
    CPU2: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
    Booting processor 3 APIC 0x3 ip 0x6000
    Initializing CPU#3
    Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258500)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 3/0x3 -> Node 1
    CPU: Physical Processor ID: 1
    CPU: Processor Core ID: 1
    x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
    CPU3: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
    Booting processor 4 APIC 0x4 ip 0x6000
    Initializing CPU#4
    Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258500)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 4/0x4 -> Node 2
    CPU: Physical Processor ID: 2
    CPU: Processor Core ID: 0
    x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
    CPU4: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
    Booting processor 5 APIC 0x5 ip 0x6000
    Initializing CPU#5
    Calibrating delay using timer specific routine.. 5629.26 BogoMIPS (lpj=11258522)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 5/0x5 -> Node 2
    CPU: Physical Processor ID: 2
    CPU: Processor Core ID: 1
    x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
    CPU5: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
    Booting processor 6 APIC 0x6 ip 0x6000
    Initializing CPU#6
    Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258505)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 6/0x6 -> Node 3
    CPU: Physical Processor ID: 3
    CPU: Processor Core ID: 0
    x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
    CPU6: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
    Booting processor 7 APIC 0x7 ip 0x6000
    Initializing CPU#7
    Calibrating delay using timer specific routine.. 5629.24 BogoMIPS (lpj=11258486)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 7/0x7 -> Node 3
    CPU: Physical Processor ID: 3
    CPU: Processor Core ID: 1
    x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
    CPU7: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
    Brought up 8 CPUs
    Total of 8 processors activated (45033.72 BogoMIPS).
    net_namespace: 1352 bytes
    xor: automatically using best checksumming function: generic_sse
    generic_sse: 8671.000 MB/sec
    xor: using function: generic_sse (8671.000 MB/sec)
    NET: Registered protocol family 16
    node 0 link 2: io port [9000, cfff]
    node 1 link 1: io port [d000, ffff]
    node 1 link 1: io port [1000, 1fff]
    TOM: 00000000e0000000 aka 3584M
    node 1 link 1: mmio [fe200000, febfffff]
    node 1 link 1: mmio [fd500000, fd5fffff]
    node 0 link 2: mmio [fd600000, fd7fffff]
    node 0 link 2: mmio [e0000000, e3ffffff]
    node 1 link 1: mmio [e8000000, ebffffff]
    node 0 link 2: mmio [a0000, bffff]
    TOM2: 0000000820000000 aka 33280M
    bus: [00,05] on node 0 link 2
    bus: 00 index 0 io port: [2000, cfff]
    bus: 00 index 1 io port: [0, fff]
    bus: 00 index 2 mmio: [fd600000, fe1fffff]
    bus: 00 index 3 mmio: [e0000000, e7ffffff]
    bus: 00 index 4 mmio: [a0000, bffff]
    bus: 00 index 5 mmio: [fec00000, ffffffff]
    bus: 00 index 6 mmio: [ec000000, fd4fffff]
    bus: 00 index 7 mmio: [820000000, fcffffffff]
    bus: [80,84] on node 1 link 1
    bus: 80 index 0 io port: [d000, ffff]
    bus: 80 index 1 io port: [1000, 1fff]
    bus: 80 index 2 mmio: [fe200000, febfffff]
    bus: 80 index 3 mmio: [fd500000, fd5fffff]
    bus: 80 index 4 mmio: [e8000000, ebffffff]
    ACPI: bus type pci registered
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Denied BIOS AML access to invalid port 0x21+0x1 (PIC0)
    ACPI Exception (dsopcode-0419): AE_AML_ILLEGAL_ADDRESS, During address validation of OpRegion [IRQM] [20081204]
    ACPI: Interpreter enabled
    ACPI: (supports S0 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    HPET not enabled in BIOS. You might try hpet=force boot option
    pci 0000:00:01.1: reg 10 io port: [0xa400-0xa41f]
    pci 0000:00:01.1: reg 20 io port: [0x2300-0x233f]
    pci 0000:00:01.1: reg 24 io port: [0x2340-0x237f]
    pci 0000:00:01.1: PME# supported from D3hot D3cold
    pci 0000:00:01.1: PME# disabled
    pci 0000:00:02.0: reg 10 32bit mmio: [0xfe1fc000-0xfe1fcfff]
    pci 0000:00:02.0: supports D1 D2
    pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    pci 0000:00:02.1: reg 10 32bit mmio: [0xfe1fdc00-0xfe1fdcff]
    pci 0000:00:02.1: supports D1 D2
    pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.1: PME# disabled
    pci 0000:00:06.0: reg 20 io port: [0xd00-0xd0f]
    pci 0000:00:07.0: reg 10 io port: [0xb800-0xb807]
    pci 0000:00:07.0: reg 14 io port: [0xb400-0xb403]
    pci 0000:00:07.0: reg 18 io port: [0xb000-0xb007]
    pci 0000:00:07.0: reg 1c io port: [0xac00-0xac03]
    pci 0000:00:07.0: reg 20 io port: [0xa800-0xa80f]
    pci 0000:00:07.0: reg 24 32bit mmio: [0xfe1fe000-0xfe1fefff]
    pci 0000:00:08.0: reg 10 io port: [0xcc00-0xcc07]
    pci 0000:00:08.0: reg 14 io port: [0xc800-0xc803]
    pci 0000:00:08.0: reg 18 io port: [0xc400-0xc407]
    pci 0000:00:08.0: reg 1c io port: [0xc000-0xc003]
    pci 0000:00:08.0: reg 20 io port: [0xbc00-0xbc0f]
    pci 0000:00:08.0: reg 24 32bit mmio: [0xfe1ff000-0xfe1fffff]
    pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0b.0: PME# disabled
    pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0c.0: PME# disabled
    pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0d.0: PME# disabled
    pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0e.0: PME# disabled
    pci 0000:05:06.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
    pci 0000:05:06.0: reg 14 32bit mmio: [0xfdc00000-0xfdc3ffff]
    pci 0000:05:06.0: reg 18 io port: [0x9000-0x907f]
    pci 0000:05:06.0: supports D1 D2
    pci 0000:05:07.0: reg 10 32bit mmio: [0xfe0ff800-0xfe0fffff]
    pci 0000:05:07.0: reg 14 32bit mmio: [0xfe0f8000-0xfe0fbfff]
    pci 0000:05:07.0: supports D1 D2
    pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:05:07.0: PME# disabled
    pci 0000:00:09.0: transparent bridge
    pci 0000:00:09.0: bridge io port: [0x9000-0x9fff]
    pci 0000:00:09.0: bridge 32bit mmio: [0xfd800000-0xfe0fffff]
    pci 0000:00:09.0: bridge 32bit mmio pref: [0xfb400000-0xfd3fffff]
    pci 0000:03:00.0: reg 10 64bit mmio: [0xfd7f0000-0xfd7fffff]
    pci 0000:03:00.0: PME# supported from D3hot D3cold
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:0c.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
    pci 0000:02:00.0: reg 10 64bit mmio: [0xfd6f0000-0xfd6fffff]
    pci 0000:02:00.0: PME# supported from D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:00:0d.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Root Bridge [PCIB] (0000:80)
    pci 0000:80:01.0: reg 14 32bit mmio: [0xfebfc000-0xfebfcfff]
    pci 0000:80:08.0: reg 10 io port: [0xfc00-0xfc07]
    pci 0000:80:08.0: reg 14 io port: [0xf800-0xf803]
    pci 0000:80:08.0: reg 18 io port: [0xf400-0xf407]
    pci 0000:80:08.0: reg 1c io port: [0xf000-0xf003]
    pci 0000:80:08.0: reg 20 io port: [0xec00-0xec0f]
    pci 0000:80:08.0: reg 24 32bit mmio: [0xfebfd000-0xfebfdfff]
    pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:80:0d.0: PME# disabled
    pci 0000:80:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:80:0e.0: PME# disabled
    pci 0000:80:10.1: reg 10 64bit mmio: [0xfebfe000-0xfebfefff]
    pci 0000:80:11.1: reg 10 64bit mmio: [0xfebff000-0xfebfffff]
    pci 0000:82:03.0: reg 10 io port: [0xd800-0xd8ff]
    pci 0000:82:03.0: reg 14 64bit mmio: [0xfeafc000-0xfeafffff]
    pci 0000:82:03.0: reg 1c 64bit mmio: [0xfeae0000-0xfeaeffff]
    pci 0000:82:03.0: reg 30 32bit mmio: [0xfe400000-0xfe7fffff]
    pci 0000:82:03.0: supports D1 D2
    pci 0000:80:10.0: bridge io port: [0xd000-0xdfff]
    pci 0000:80:10.0: bridge 32bit mmio: [0xfe200000-0xfeafffff]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCIB._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGA._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5
    ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5
    ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *7
    ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
    ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *11
    ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *5
    ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *11
    ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *10
    ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled.
    ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled.
    ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled.
    ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled.
    ACPI: PCI Interrupt Link [LK2N] (IRQs 44 45 46 47) *0, disabled.
    ACPI: PCI Interrupt Link [LT3D] (IRQs 44 45 46 47) *0, disabled.
    ACPI: PCI Interrupt Link [LT2E] (IRQs 44 45 46 47) *0, disabled.
    ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - EE, should be EB [20081204]
    SCSI subsystem initialized
    libata version 3.00 loaded.
    PCI: Using ACPI for IRQ routing
    PCI-DMA: Disabling AGP.
    PCI-DMA: aperture base @ f4000000 size 65536 KB
    init_memory_mapping: 00000000f4000000-00000000f8000000
    00f4000000 - 00f8000000 page 2M
    last_map_addr: f8000000 end: f8000000
    PCI-DMA: using GART IOMMU.
    PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:07: ioport range 0x190-0x193 has been reserved
    system 00:07: ioport range 0x4d0-0x4d1 has been reserved
    system 00:07: iomem range 0xffb80000-0xfffffffe has been reserved
    system 00:07: iomem range 0xdfefc000-0xdfefcfff could not be reserved
    system 00:07: iomem range 0xdfefd000-0xdfefd3ff could not be reserved
    system 00:07: iomem range 0xdfefe000-0xdfefe3ff could not be reserved
    system 00:07: iomem range 0xdfeff000-0xdfefffff could not be reserved
    system 00:07: iomem range 0xfefff000-0xfeffffff has been reserved
    system 00:08: ioport range 0xca2-0xca3 has been reserved
    system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
    system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved
    system 00:08: iomem range 0xfe200000-0xfebfffff could not be reserved
    system 00:08: iomem range 0xfd500000-0xfd5fffff has been reserved
    system 00:0b: ioport range 0xa00-0xa0f has been reserved
    system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
    system 00:0d: iomem range 0x0-0x9ffff could not be reserved
    system 00:0d: iomem range 0xc0000-0xdffff has been reserved
    system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
    system 00:0d: iomem range 0x100000-0xdfffffff could not be reserved
    pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
    Switched to high resolution mode on CPU 0
    pci 0000:00:09.0: IO window: 0x9000-0x9fff
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 5
    Switched to high resolution mode on CPU 4
    Switched to high resolution mode on CPU 3
    Switched to high resolution mode on CPU 2
    Switched to high resolution mode on CPU 7
    Switched to high resolution mode on CPU 6
    pci 0000:00:09.0: MEM window: 0xfd800000-0xfe0fffff
    pci 0000:00:09.0: PREFETCH window: 0x000000fb400000-0x000000fd3fffff
    pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
    pci 0000:00:0b.0: IO window: disabled
    pci 0000:00:0b.0: MEM window: disabled
    pci 0000:00:0b.0: PREFETCH window: disabled
    pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
    pci 0000:00:0c.0: IO window: disabled
    pci 0000:00:0c.0: MEM window: 0xfd700000-0xfd7fffff
    pci 0000:00:0c.0: PREFETCH window: disabled
    pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:0d.0: IO window: disabled
    pci 0000:00:0d.0: MEM window: 0xfd600000-0xfd6fffff
    pci 0000:00:0d.0: PREFETCH window: disabled
    pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:0e.0: IO window: disabled
    pci 0000:00:0e.0: MEM window: disabled
    pci 0000:00:0e.0: PREFETCH window: disabled
    pci 0000:00:09.0: setting latency timer to 64
    pci 0000:00:0b.0: setting latency timer to 64
    pci 0000:00:0c.0: setting latency timer to 64
    pci 0000:00:0d.0: setting latency timer to 64
    pci 0000:00:0e.0: setting latency timer to 64
    pci 0000:80:0d.0: PCI bridge, secondary bus 0000:84
    pci 0000:80:0d.0: IO window: disabled
    pci 0000:80:0d.0: MEM window: disabled
    pci 0000:80:0d.0: PREFETCH window: disabled
    pci 0000:80:0e.0: PCI bridge, secondary bus 0000:83
    pci 0000:80:0e.0: IO window: disabled
    pci 0000:80:0e.0: MEM window: disabled
    pci 0000:80:0e.0: PREFETCH window: disabled
    pci 0000:80:10.0: PCI bridge, secondary bus 0000:82
    pci 0000:80:10.0: IO window: 0xd000-0xdfff
    pci 0000:80:10.0: MEM window: 0xfe200000-0xfeafffff
    pci 0000:80:10.0: PREFETCH window: disabled
    pci 0000:80:11.0: PCI bridge, secondary bus 0000:81
    pci 0000:80:11.0: IO window: disabled
    pci 0000:80:11.0: MEM window: disabled
    pci 0000:80:11.0: PREFETCH window: disabled
    pci 0000:80:0d.0: setting latency timer to 64
    pci 0000:80:0e.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 io: [0x2000-0xcfff]
    pci_bus 0000:00: resource 1 io: [0x00-0xfff]
    pci_bus 0000:00: resource 2 mem: [0xfd600000-0xfe1fffff]
    pci_bus 0000:00: resource 3 mem: [0xe0000000-0xe7ffffff]
    pci_bus 0000:00: resource 4 mem: [0x0a0000-0x0bffff]
    pci_bus 0000:00: resource 5 mem: [0xfec00000-0xffffffff]
    pci_bus 0000:00: resource 6 mem: [0xec000000-0xfd4fffff]
    pci_bus 0000:00: resource 7 mem: [0x820000000-0xfcffffffff]
    pci_bus 0000:05: resource 0 io: [0x9000-0x9fff]
    pci_bus 0000:05: resource 1 mem: [0xfd800000-0xfe0fffff]
    pci_bus 0000:05: resource 2 mem: [0xfb400000-0xfd3fffff]
    pci_bus 0000:05: resource 3 io: [0x2000-0xcfff]
    pci_bus 0000:05: resource 4 io: [0x00-0xfff]
    pci_bus 0000:05: resource 5 mem: [0xfd600000-0xfe1fffff]
    pci_bus 0000:05: resource 6 mem: [0xe0000000-0xe7ffffff]
    pci_bus 0000:05: resource 7 mem: [0x0a0000-0x0bffff]
    pci_bus 0000:05: resource 8 mem: [0xfec00000-0xffffffff]
    pci_bus 0000:05: resource 9 mem: [0xec000000-0xfd4fffff]
    pci_bus 0000:05: resource 10 mem: [0x820000000-0xfcffffffff]
    pci_bus 0000:04: resource 0 mem: [0x0-0x0]
    pci_bus 0000:04: resource 1 mem: [0x0-0x0]
    pci_bus 0000:04: resource 2 mem: [0x0-0x0]
    pci_bus 0000:04: resource 3 mem: [0x0-0x0]
    pci_bus 0000:03: resource 0 mem: [0x0-0x0]
    pci_bus 0000:03: resource 1 mem: [0xfd700000-0xfd7fffff]
    pci_bus 0000:03: resource 2 mem: [0x0-0x0]
    pci_bus 0000:03: resource 3 mem: [0x0-0x0]
    pci_bus 0000:02: resource 0 mem: [0x0-0x0]
    pci_bus 0000:02: resource 1 mem: [0xfd600000-0xfd6fffff]
    pci_bus 0000:02: resource 2 mem: [0x0-0x0]
    pci_bus 0000:02: resource 3 mem: [0x0-0x0]
    pci_bus 0000:01: resource 0 mem: [0x0-0x0]
    pci_bus 0000:01: resource 1 mem: [0x0-0x0]
    pci_bus 0000:01: resource 2 mem: [0x0-0x0]
    pci_bus 0000:01: resource 3 mem: [0x0-0x0]
    pci_bus 0000:80: resource 0 io: [0xd000-0xffff]
    pci_bus 0000:80: resource 1 io: [0x1000-0x1fff]
    pci_bus 0000:80: resource 2 mem: [0xfe200000-0xfebfffff]
    pci_bus 0000:80: resource 3 mem: [0xfd500000-0xfd5fffff]
    pci_bus 0000:80: resource 4 mem: [0xe8000000-0xebffffff]
    pci_bus 0000:84: resource 0 mem: [0x0-0x0]
    pci_bus 0000:84: resource 1 mem: [0x0-0x0]
    pci_bus 0000:84: resource 2 mem: [0x0-0x0]
    pci_bus 0000:84: resource 3 mem: [0x0-0x0]
    pci_bus 0000:83: resource 0 mem: [0x0-0x0]
    pci_bus 0000:83: resource 1 mem: [0x0-0x0]
    pci_bus 0000:83: resource 2 mem: [0x0-0x0]
    pci_bus 0000:83: resource 3 mem: [0x0-0x0]
    pci_bus 0000:82: resource 0 io: [0xd000-0xdfff]
    pci_bus 0000:82: resource 1 mem: [0xfe200000-0xfeafffff]
    pci_bus 0000:82: resource 2 mem: [0x0-0x0]
    pci_bus 0000:82: resource 3 mem: [0x0-0x0]
    pci_bus 0000:81: resource 0 mem: [0x0-0x0]
    pci_bus 0000:81: resource 1 mem: [0x0-0x0]
    pci_bus 0000:81: resource 2 mem: [0x0-0x0]
    pci_bus 0000:81: resource 3 mem: [0x0-0x0]
    NET: Registered protocol family 2
    IP route cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 524288 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    NTFS driver 2.1.29 [Flags: R/W].
    SGI XFS with security attributes, large block/inode numbers, no debug enabled
    msgmni has been set to 32768
    alg: No test for cipher_null (cipher_null-generic)
    alg: No test for digest_null (digest_null-generic)
    alg: No test for compress_null (compress_null-generic)
    alg: No test for stdrng (krng)
    async_tx: api initialized (sync-only)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered (default)
    io scheduler cfq registered
    pci 0000:00:00.0: Enabling HT MSI Mapping
    pci 0000:00:0b.0: Found disabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:0b.0: Enabling HT MSI Mapping
    pci 0000:00:0c.0: Found disabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:0c.0: Enabling HT MSI Mapping
    pci 0000:00:0d.0: Found disabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:0d.0: Enabling HT MSI Mapping
    pci 0000:00:0e.0: Found disabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:0e.0: Enabling HT MSI Mapping
    pci 0000:80:00.0: Enabling HT MSI Mapping
    pci 0000:80:0d.0: Found disabled HT MSI Mapping
    pci 0000:80:00.0: Found enabled HT MSI Mapping
    pci 0000:80:0d.0: Enabling HT MSI Mapping
    pci 0000:80:0e.0: Found disabled HT MSI Mapping
    pci 0000:80:00.0: Found enabled HT MSI Mapping
    pci 0000:80:0e.0: Enabling HT MSI Mapping
    pci 0000:80:10.0: Found disabled HT MSI Mapping
    pci 0000:80:10.0: MSI quirk detected; subordinate MSI disabled
    pci 0000:80:11.0: Found disabled HT MSI Mapping
    pci 0000:80:11.0: MSI quirk detected; subordinate MSI disabled
    pcieport-driver 0000:00:0b.0: setting latency timer to 64
    pcieport-driver 0000:00:0b.0: irq 86 for MSI/MSI-X
    pcieport-driver 0000:00:0c.0: setting latency timer to 64
    pcieport-driver 0000:00:0c.0: irq 87 for MSI/MSI-X
    pcieport-driver 0000:00:0d.0: setting latency timer to 64
    pcieport-driver 0000:00:0d.0: irq 88 for MSI/MSI-X
    pcieport-driver 0000:00:0e.0: setting latency timer to 64
    pcieport-driver 0000:00:0e.0: irq 89 for MSI/MSI-X
    pcieport-driver 0000:80:0d.0: setting latency timer to 64
    pcieport-driver 0000:80:0d.0: irq 90 for MSI/MSI-X
    pcieport-driver 0000:80:0e.0: setting latency timer to 64
    pcieport-driver 0000:80:0e.0: irq 91 for MSI/MSI-X
    lp: driver loaded but no devices found
    Real Time Clock Driver v1.12b
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    floppy0: no floppy controllers found
    brd: module loaded
    loop: module loaded
    nbd: registered device at major 43
    Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
    Copyright (c) 1999-2006 Intel Corporation.
    Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
    bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    tg3.c:v3.97 (December 10, 2008)
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
    tg3 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
    tg3 0000:03:00.0: setting latency timer to 64
    tg3 0000:03:00.0: PME# disabled
    eth0: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:d0:68:12:f6:fd
    eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
    eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
    tg3 0000:02:00.0: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18
    tg3 0000:02:00.0: setting latency timer to 64
    tg3 0000:02:00.0: PME# disabled
    eth1: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:d0:68:12:f6:fc
    eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    eth1: dma_rwctrl[76180000] dma_mask[64-bit]
    tun: Universal TUN/TAP device driver, 1.6
    tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    Adaptec aacraid driver 1.1-5[2456]-ms
    QLogic Fibre Channel HBA Driver: 8.03.00-k2
    megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
    megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
    megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
    3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
    st: Version 20081215, fixed bufsize 32768, s/g segs 256
    Driver 'st' needs updating - please use bus_type methods
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    SCSI Media Changer driver v0.25
    Driver 'ch' needs updating - please use bus_type methods
    sata_nv 0000:00:07.0: version 3.5
    ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
    sata_nv 0000:00:07.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22
    sata_nv 0000:00:07.0: setting latency timer to 64
    scsi0 : sata_nv
    scsi1 : sata_nv
    ata1: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa800 irq 22
    ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa808 irq 22
    ata1: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link down (SStatus 0 SControl 300)
    ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 21
    sata_nv 0000:00:08.0: PCI INT A -> Link[LTIE] -> GSI 21 (level, low) -> IRQ 21
    sata_nv 0000:00:08.0: setting latency timer to 64
    scsi2 : sata_nv
    scsi3 : sata_nv
    ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 21
    ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 21
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 47
    sata_nv 0000:80:08.0: PCI INT A -> Link[LT2E] -> GSI 47 (level, low) -> IRQ 47
    sata_nv 0000:80:08.0: setting latency timer to 64
    scsi4 : sata_nv
    scsi5 : sata_nv
    ata5: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 47
    ata6: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 47
    ata5: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    pata_amd 0000:00:06.0: version 0.3.11
    pata_amd 0000:00:06.0: setting latency timer to 64
    scsi6 : pata_amd
    scsi7 : pata_amd
    ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd00 irq 14
    ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd08 irq 15
    ata7.01: ATAPI: TSSTcorpCD-ROM TS-L162C, MO00, max UDMA/33
    ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc00000) ACPI=0x701f (900:54:0x14)
    ata7.01: configured for UDMA/33
    scsi 6:0:1:0: CD-ROM TSSTcorp CD-ROM TS-L162C MO00 PQ: 0 ANSI: 5
    sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 6:0:1:0: Attached scsi CD-ROM sr0
    sr 6:0:1:0: Attached scsi generic sg0 type 5
    I2O subsystem v1.325
    i2o: max drivers = 8
    I2O Configuration OSM v1.323
    I2O Bus Adapter OSM v1.317
    I2O Block Device OSM v1.325
    I2O SCSI Peripheral OSM v1.316
    I2O ProcFS OSM v1.316
    Fusion MPT base driver 3.04.07
    Copyright (c) 1999-2008 LSI Corporation
    Fusion MPT SPI Host driver 3.04.07
    Fusion MPT FC Host driver 3.04.07
    Fusion MPT SAS Host driver 3.04.07
    mptsas 0000:82:03.0: PCI INT A -> GSI 75 (level, low) -> IRQ 75
    mptbase: ioc0: Initiating bringup
    ioc0: LSISAS1068 B1: Capabilities={Initiator}
    scsi8 : ioc0: LSISAS1068 B1, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=75
    scsi 8:0:0:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5
    scsi 8:0:0:0: Attached scsi generic sg1 type 0
    scsi 8:0:1:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5
    scsi 8:0:1:0: Attached scsi generic sg2 type 0
    scsi 8:1:0:0: Direct-Access LSILOGIC Logical Volume 3000 PQ: 0 ANSI: 2
    sd 8:1:0:0: [sda] 285155328 512-byte hardware sectors: (145 GB/135 GiB)
    sd 8:1:0:0: [sda] Write Protect is off
    sd 8:1:0:0: [sda] Mode Sense: 03 00 00 08
    sd 8:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    sd 8:1:0:0: [sda] 285155328 512-byte hardware sectors: (145 GB/135 GiB)
    sd 8:1:0:0: [sda] Write Protect is off
    sd 8:1:0:0: [sda] Mode Sense: 03 00 00 08
    sd 8:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 8:1:0:0: [sda] Attached SCSI disk
    sd 8:1:0:0: Attached scsi generic sg3 type 0
    Fusion MPT misc device (ioctl) driver 3.04.07
    mptctl: Registered with Fusion MPT base driver
    mptctl: /dev/mptctl @ (major,minor=10,220)
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: PC Speaker as /class/input/input0
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: I/O resource nForce2_smbus [0x2300-0x233f] conflicts with ACPI region SMRG [0x2300-0x2304]
    ACPI: Device needs an ACPI driver
    i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2300
    i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2340
    hdaps: supported laptop not found!
    hdaps: driver init failed (ret=-19)!
    k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
    k8temp 0000:00:1a.3: Temperature readouts might be wrong - check erratum #141
    k8temp 0000:00:1b.3: Temperature readouts might be wrong - check erratum #141
    md: raid1 personality registered for level 1
    raid6: int64x1 2540 MB/s
    raid6: int64x2 3386 MB/s
    raid6: int64x4 3191 MB/s
    raid6: int64x8 2263 MB/s
    raid6: sse2x1 3888 MB/s
    raid6: sse2x2 5188 MB/s
    raid6: sse2x4 5257 MB/s
    raid6: using algorithm sse2x4 (5257 MB/s)
    md: raid6 personality registered for level 6
    md: raid5 personality registered for level 5
    md: raid4 personality registered for level 4
    cpuidle: using governor ladder
    cpuidle: using governor menu
    oprofile: using NMI interrupt.
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
    sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    ctnetlink v0.93: registering with nfnetlink.
    NF_TPROXY: Transparent proxy support initialized, version 4.1.0
    NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
    ip_tables: (C) 2000-2006 Netfilter Core Team
    ClusterIP Version 0.8 loaded successfully
    TCP cubic registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 17
    NET: Registered protocol family 15
    Bridge firewalling registered
    Ebtables v2.0 registered
    802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
    All bugs added by David S. Miller <davem@redhat.com>
    md: Waiting for all devices to be available before autodetect
    md: If you don't use raid, use raid=noautodetect
    md: Autodetecting RAID arrays.
    md: Scanned 0 and added 0 devices.
    md: autorun ...
    md: ... autorun DONE.
    UDF-fs: No VRS found
    XFS mounting filesystem sda3
    Ending clean XFS mount for filesystem: sda3
    VFS: Mounted root (xfs filesystem) readonly on device 8:3.
    Freeing unused kernel memory: 372k freed
    Adding 2048276k swap on /dev/sda1. Priority:-1 extents:1 across:2048276k
    XFS mounting filesystem sda4
    Ending clean XFS mount for filesystem: sda4
    warning: `ntpd' uses 32-bit capabilities (legacy support in use)
    tg3 0000:03:00.0: PME# disabled
    tg3: eth0: Link is up at 1000 Mbps, full duplex.
    tg3: eth0: Flow control is off for TX and off for RX.
    \
     
     \ /
      Last update: 2009-02-18 12:23    [W:4.102 / U:0.116 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site