lkml.org 
[lkml]   [2009]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [BISECTED] 33 second boot delay (caused by Radeon KMS) on 2.6.32
From
On Mon, Dec 7, 2009 at 9:05 PM, Dave Airlie <airlied@redhat.com> wrote:
> On Mon, 2009-12-07 at 21:01 -0800, Steven Noonan wrote:
>> Hi,
>>
>> I finally got around to compiling 2.6.32 for my primary machine, and
>> with radeon.modeset=1, the machine has a horrifying 33 second boot
>> delay (it stays at a black screen for the duration).
>>
>> I figured a 'git bisect v2.6.32 v2.6.31 -- drivers/gpu/drm' would
>> catch it. Hopefully this bisection helps pin down the underlying
>> problem:
>>  # bad:  [22763c5c] Linux 2.6.32
>>  # good: [74fca6a4] Linux 2.6.31
>>  # bad:  [df748b02] drm/ttm: fix refcounting in ttm global code.
>>  # good: [a513c184] drm/radeon/kms: Don't try to process irq when we a
>>  # good: [aadd4e17] drm/radeon: some r420s have a CP race with the DMA
>>  # good: [74bf2ad5] drm/kms: make fb helper work for all drivers.
>>  # bad:  [62a8ea3f] drm/radeon/kms: Remove old init path as no hw use
>>  # good: [f0ed1f65] drm/radeon/kms: Convert R520 to new init path and
>>  # skip: [d4550907] drm/radeon/kms: Convert R100 to new init path (V2)
>>  # good: [3bc68535] drm/radeon/kms: Convert RS690/RS740 to new init pa
>>  # bad:  [c010f800] drm/radeon/kms: Convert RS600 to new init path
>>
>> Any ideas why c010f800 would cause this?
>>
>
> Wierd, it seems an unlikely change to affect this, can you boot with
> drm.debug=15 on the command line and see if we can glean anymore info
> about where its hanging.

Attached the dmesg with drm.debug=15.

> It might be good to open a bug either on kernel.org or freedesktop.org
> (against Xorg radeon driver - since we mostly hang out there).
>

Okay. Reported. https://bugs.freedesktop.org/show_bug.cgi?id=25506

- Steven
[ 0.000000] Linux version 2.6.32 (root@alcarin) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #2 SMP Mon Dec 7 19:05:22 PST 2009
[ 0.000000] Command line: root=/dev/sda5 video=uvesafb:1440x900-32,mtrr:3,ywrap,nocrtc nmi_watchdog=1 drm.debug=15
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf0e7000 (usable)
[ 0.000000] BIOS-e820: 00000000bf0e7000 - 00000000bf2e8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf2e8000 - 00000000bfebe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfeef000 - 00000000bff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbf0e7 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 000000000 mask F80000000 write-back
[ 0.000000] 4 base 080000000 mask FC0000000 write-back
[ 0.000000] 5 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf0e7000 (usable)
[ 0.000000] modified: 00000000bf0e7000 - 00000000bf2e8000 (ACPI NVS)
[ 0.000000] modified: 00000000bf2e8000 - 00000000bfebe000 (ACPI data)
[ 0.000000] modified: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS)
[ 0.000000] modified: 00000000bfeef000 - 00000000bff00000 (ACPI data)
[ 0.000000] modified: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf0e7000
[ 0.000000] 0000000000 - 00bf000000 page 2M
[ 0.000000] 00bf000000 - 00bf0e7000 page 4k
[ 0.000000] kernel direct mapping tables up to bf0e7000 @ 8000-d000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 00000000bfefd1c0 00074 (v01 APPLE Apple00 000000A5 01000013)
[ 0.000000] ACPI: FACP 00000000bfefb000 000F4 (v03 APPLE Apple00 000000A5 Loki 0000005F)
[ 0.000000] ACPI: DSDT 00000000bfef0000 048D1 (v01 APPLE MacBookP 00020002 INTL 20050309)
[ 0.000000] ACPI: FACS 00000000bfec0000 00040
[ 0.000000] ACPI: HPET 00000000bfefa000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bfef9000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 00000000bfef8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 00000000bfef7000 000A0 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 00000000bfef6000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 00000000bfef5000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000bfeef000 004DC (v01 APPLE CpuPm 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 00000000bfebd000 0064F (v01 SataRe SataPri 00001000 INTL 20050309)
[ 0.000000] ACPI: SSDT 00000000bfebc000 0069C (v01 SataRe SataSec 00001000 INTL 20050309)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00bf0e7000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a1f808] TEXT DATA BSS ==> [0001000000 - 0001a1f808]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [0001a20000 - 0001a20271] BRK ==> [0001a20000 - 0001a20271]
[ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff880002000000-ffff880004ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf0e7
[ 0.000000] On node 0 totalpages: 782465
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3828 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12164 pages used for memmap
[ 0.000000] DMA32 zone: 766307 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880001c00000 s83160 r8192 d23336 u1048576
[ 0.000000] pcpu-alloc: s83160 r8192 d23336 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 770135
[ 0.000000] Kernel command line: root=/dev/sda5 video=uvesafb:1440x900-32,mtrr:3,ywrap,nocrtc nmi_watchdog=1 drm.debug=15
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3062972k/3130268k available (5169k kernel code, 408k absent, 66164k reserved, 3687k data, 640k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 2327.496 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4654.99 BogoMIPS (lpj=2327496)
[ 0.004232] Mount-cache hash table entries: 256
[ 0.005174] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.005358] CPU: L2 cache: 4096K
[ 0.005454] CPU: Physical Processor ID: 0
[ 0.005551] CPU: Processor Core ID: 0
[ 0.005648] mce: CPU supports 6 MCE banks
[ 0.005750] CPU0: Thermal monitoring enabled (TM2)
[ 0.005849] using mwait in idle threads.
[ 0.006003] Performance Events: Core2 events, Intel PMU driver.
[ 0.006277] ... version: 2
[ 0.006373] ... bit width: 40
[ 0.006469] ... generic registers: 2
[ 0.006566] ... value mask: 000000ffffffffff
[ 0.007002] ... max period: 000000007fffffff
[ 0.007099] ... fixed-purpose events: 3
[ 0.007195] ... event mask: 0000000700000003
[ 0.007312] ACPI: Core revision 20090903
[ 0.016006] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.016107] ftrace: allocating 25244 entries in 99 pages
[ 0.017059] Setting APIC routing to flat
[ 0.018159] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028264] CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
[ 0.028995] APIC timer registered as dummy, due to nmi_watchdog=1!
[ 0.029264] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004999] Initializing CPU#1
[ 0.004999] Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327517)
[ 0.004999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004999] CPU: L2 cache: 4096K
[ 0.004999] CPU: Physical Processor ID: 0
[ 0.004999] CPU: Processor Core ID: 1
[ 0.004999] CPU1: Thermal monitoring enabled (TM2)
[ 0.100034] CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
[ 0.100990] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.102006] Brought up 2 CPUs
[ 0.102103] Total of 2 processors activated (9310.02 BogoMIPS).
[ 0.102245] Testing NMI watchdog ... OK.
[ 0.123004] CPU0 attaching sched-domain:
[ 0.123009] domain 0: span 0-1 level MC
[ 0.123011] groups: 0 1
[ 0.123017] CPU1 attaching sched-domain:
[ 0.123019] domain 0: span 0-1 level MC
[ 0.123021] groups: 1 0
[ 0.123109] khelper used greatest stack depth: 6600 bytes left
[ 0.124024] Time: 5:13:35 Date: 12/08/09
[ 0.124167] NET: Registered protocol family 16
[ 0.124282] khelper used greatest stack depth: 6376 bytes left
[ 0.124282] khelper used greatest stack depth: 6040 bytes left
[ 0.126020] ACPI: bus type pci registered
[ 0.126129] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 0.126129] PCI: MCFG area at f0000000 reserved in E820
[ 0.126225] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.128390] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.128488] PCI: Using configuration type 1 for base access
[ 0.132026] bio: create slab <bio-0> at 0
[ 0.133658] ACPI: EC: EC description table is found, configuring boot EC
[ 0.135962] ACPI: BIOS _OSI(Linux) query ignored
[ 0.136568] ACPI: Interpreter enabled
[ 0.136667] ACPI: (supports S0 S3 S4 S5)
[ 0.137168] ACPI: Using IOAPIC for interrupt routing
[ 0.142040] khelper used greatest stack depth: 5992 bytes left
[ 0.148099] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.149163] ACPI: No dock devices found.
[ 0.149947] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.150091] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.150191] pci 0000:00:01.0: PME# disabled
[ 0.150318] pci 0000:00:07.0: reg 10 32bit mmio: [0xd8404000-0xd8404fff]
[ 0.150421] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd8400000-0xd8403fff]
[ 0.150482] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.150583] pci 0000:00:1b.0: PME# disabled
[ 0.150769] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.150984] pci 0000:00:1c.0: PME# disabled
[ 0.151174] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.151275] pci 0000:00:1c.1: PME# disabled
[ 0.151464] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.151565] pci 0000:00:1c.2: PME# disabled
[ 0.151726] pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f]
[ 0.151791] pci 0000:00:1d.1: reg 20 io port: [0x4060-0x407f]
[ 0.151856] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f]
[ 0.151921] pci 0000:00:1d.3: reg 20 io port: [0x4020-0x403f]
[ 0.152013] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd8405400-0xd84057ff]
[ 0.152077] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.152179] pci 0000:00:1d.7: PME# disabled
[ 0.152449] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.152557] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.152658] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 0.152765] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.152875] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[ 0.153038] pci 0000:00:1f.1: reg 10 io port: [0x40d8-0x40df]
[ 0.153046] pci 0000:00:1f.1: reg 14 io port: [0x40ec-0x40ef]
[ 0.153054] pci 0000:00:1f.1: reg 18 io port: [0x40d0-0x40d7]
[ 0.153062] pci 0000:00:1f.1: reg 1c io port: [0x40e8-0x40eb]
[ 0.153070] pci 0000:00:1f.1: reg 20 io port: [0x40b0-0x40bf]
[ 0.153129] pci 0000:00:1f.2: reg 10 io port: [0x40c8-0x40cf]
[ 0.153137] pci 0000:00:1f.2: reg 14 io port: [0x40e4-0x40e7]
[ 0.153145] pci 0000:00:1f.2: reg 18 io port: [0x40c0-0x40c7]
[ 0.153153] pci 0000:00:1f.2: reg 1c io port: [0x40e0-0x40e3]
[ 0.153161] pci 0000:00:1f.2: reg 20 io port: [0x40a0-0x40af]
[ 0.153169] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd8405000-0xd84053ff]
[ 0.153199] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.153299] pci 0000:00:1f.2: PME# disabled
[ 0.153457] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf]
[ 0.153523] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.153532] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.153541] pci 0000:01:00.0: reg 18 32bit mmio: [0xd8300000-0xd830ffff]
[ 0.153560] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[ 0.153582] pci 0000:01:00.0: supports D1 D2
[ 0.153645] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.153648] pci 0000:00:01.0: bridge 32bit mmio: [0xd8300000-0xd83fffff]
[ 0.153653] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.153733] pci 0000:02:00.0: reg 10 64bit mmio: [0xd8200000-0xd8203fff]
[ 0.153744] pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff]
[ 0.153779] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[ 0.153834] pci 0000:02:00.0: supports D1 D2
[ 0.153836] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153939] pci 0000:02:00.0: PME# disabled
[ 0.154044] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.154049] pci 0000:00:1c.0: bridge 32bit mmio: [0xd8200000-0xd82fffff]
[ 0.154127] pci 0000:03:00.0: reg 10 64bit mmio: [0xd8100000-0xd810ffff]
[ 0.154220] pci 0000:03:00.0: supports D1
[ 0.154222] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.154324] pci 0000:03:00.0: PME# disabled
[ 0.154501] pci 0000:00:1c.1: bridge 32bit mmio: [0xd8100000-0xd81fffff]
[ 0.154570] pci 0000:00:1c.2: bridge io port: [0x1000-0x1fff]
[ 0.154575] pci 0000:00:1c.2: bridge 32bit mmio: [0xd4100000-0xd80fffff]
[ 0.154583] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xd0000000-0xd3ffffff]
[ 0.154639] pci 0000:0c:03.0: reg 10 32bit mmio: [0xd4004000-0xd40047ff]
[ 0.154648] pci 0000:0c:03.0: reg 14 32bit mmio: [0xd4000000-0xd4003fff]
[ 0.154712] pci 0000:0c:03.0: supports D1 D2
[ 0.154714] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.154816] pci 0000:0c:03.0: PME# disabled
[ 0.155041] pci 0000:00:1e.0: transparent bridge
[ 0.155144] pci 0000:00:1e.0: bridge 32bit mmio: [0xd4000000-0xd40fffff]
[ 0.155179] pci_bus 0000:00: on NUMA node 0
[ 0.155184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.155366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.155442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.155515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.155588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.155680] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.163244] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.165251] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.166504] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.167770] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.169064] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.170422] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.171858] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.173157] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.174217] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.174217] vgaarb: loaded
[ 0.174293] SCSI subsystem initialized
[ 0.174997] libata version 3.00 loaded.
[ 0.175028] PCI: Using ACPI for IRQ routing
[ 0.175217] cfg80211: Using static regulatory domain info
[ 0.175217] cfg80211: Regulatory domain: US
[ 0.175976] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.176083] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.176182] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.176281] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.176380] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.176479] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.176578] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.176684] cfg80211: Calling CRDA for country: US
[ 0.176791] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.177270] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.180980] Switching to clocksource tsc
[ 0.191979] Slow work thread pool: Starting up
[ 0.192155] Slow work thread pool: Ready
[ 0.192270] FS-Cache: Loaded
[ 0.192451] CacheFiles: Loaded
[ 0.192559] pnp: PnP ACPI init
[ 0.192664] ACPI: bus type pnp registered
[ 0.194612] pnp 00:07: io resource (0x1640-0x164f) overlaps 0000:00:1c.2 BAR 7 (0x1000-0x1fff), disabling
[ 0.199137] pnp: PnP ACPI: found 9 devices
[ 0.199234] ACPI: ACPI bus type pnp unregistered
[ 0.199342] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.199443] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.199543] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.199643] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.199742] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.199853] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.199958] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.200063] system 00:07: ioport range 0x680-0x6ef has been reserved
[ 0.200162] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.200261] system 00:07: ioport range 0x810-0x817 has been reserved
[ 0.200360] system 00:07: ioport range 0x400-0x47f has been reserved
[ 0.200459] system 00:07: ioport range 0x500-0x53f has been reserved
[ 0.205774] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 0.205890] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 0.206047] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.206146] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.206246] pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff
[ 0.206346] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.206454] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.206554] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.206656] pci 0000:00:1c.0: MEM window: 0xd8200000-0xd82fffff
[ 0.206757] pci 0000:00:1c.0: PREFETCH window: 0xd8500000-0xd86fffff
[ 0.206867] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.206966] pci 0000:00:1c.1: IO window: 0x5000-0x5fff
[ 0.207068] pci 0000:00:1c.1: MEM window: 0xd8100000-0xd81fffff
[ 0.207169] pci 0000:00:1c.1: PREFETCH window: 0x000000d8700000-0x000000d88fffff
[ 0.207280] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.207380] pci 0000:00:1c.2: IO window: 0x1000-0x1fff
[ 0.207482] pci 0000:00:1c.2: MEM window: 0xd4100000-0xd80fffff
[ 0.207583] pci 0000:00:1c.2: PREFETCH window: 0x000000d0000000-0x000000d3ffffff
[ 0.207694] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
[ 0.207792] pci 0000:00:1e.0: IO window: disabled
[ 0.207901] pci 0000:00:1e.0: MEM window: 0xd4000000-0xd40fffff
[ 0.208002] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.208109] alloc irq_desc for 16 on node -1
[ 0.208111] alloc kstat_irqs on node -1
[ 0.208116] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.208217] pci 0000:00:01.0: setting latency timer to 64
[ 0.208227] alloc irq_desc for 17 on node -1
[ 0.208229] alloc kstat_irqs on node -1
[ 0.208232] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.208334] pci 0000:00:1c.0: setting latency timer to 64
[ 0.208345] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.208446] pci 0000:00:1c.1: setting latency timer to 64
[ 0.208456] alloc irq_desc for 18 on node -1
[ 0.208458] alloc kstat_irqs on node -1
[ 0.208462] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.208563] pci 0000:00:1c.2: setting latency timer to 64
[ 0.208619] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.208722] pci 0000:00:1e.0: setting latency timer to 64
[ 0.208726] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.208729] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.208732] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.208734] pci_bus 0000:01: resource 1 mem: [0xd8300000-0xd83fffff]
[ 0.208737] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.208739] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.208742] pci_bus 0000:02: resource 1 mem: [0xd8200000-0xd82fffff]
[ 0.208744] pci_bus 0000:02: resource 2 pref mem [0xd8500000-0xd86fffff]
[ 0.208747] pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
[ 0.208749] pci_bus 0000:03: resource 1 mem: [0xd8100000-0xd81fffff]
[ 0.208751] pci_bus 0000:03: resource 2 pref mem [0xd8700000-0xd88fffff]
[ 0.208754] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.208756] pci_bus 0000:04: resource 1 mem: [0xd4100000-0xd80fffff]
[ 0.208759] pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xd3ffffff]
[ 0.208761] pci_bus 0000:0c: resource 1 mem: [0xd4000000-0xd40fffff]
[ 0.208764] pci_bus 0000:0c: resource 3 io: [0x00-0xffff]
[ 0.208766] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.208811] NET: Registered protocol family 2
[ 0.209002] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.209785] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.212589] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.214391] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.214494] TCP reno registered
[ 0.214733] NET: Registered protocol family 1
[ 0.214885] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010
[ 0.214887] pci 0000:00:1d.0: Performing full reset
[ 0.214906] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.214908] pci 0000:00:1d.1: Performing full reset
[ 0.214926] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.214928] pci 0000:00:1d.2: Performing full reset
[ 0.214947] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.214949] pci 0000:00:1d.3: Performing full reset
[ 0.215008] pci 0000:01:00.0: Boot video device
[ 0.216594] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[ 0.216699] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
[ 0.216867] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.216974] Scanning for low memory corruption every 60 seconds
[ 0.218004] Initializing RT-Tester: OK
[ 0.218188] audit: initializing netlink socket (disabled)
[ 0.218294] type=2000 audit(1260249215.217:1): initialized
[ 0.226371] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.230032] VFS: Disk quotas dquot_6.5.2
[ 0.230225] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.230704] DLM (built Dec 7 2009 18:59:18) installed
[ 0.232024] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.236546] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 0.237580] SGI XFS Quota Management subsystem
[ 0.237685] msgmni has been set to 5983
[ 0.238638] alg: No test for stdrng (krng)
[ 0.238762] alg: No test for ghash (ghash-generic)
[ 0.239008] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.239114] io scheduler noop registered
[ 0.239211] io scheduler anticipatory registered
[ 0.239307] io scheduler deadline registered
[ 0.239414] io scheduler cfq registered (default)
[ 0.239687] alloc irq_desc for 24 on node -1
[ 0.239690] alloc kstat_irqs on node -1
[ 0.239699] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.239706] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.239946] alloc irq_desc for 25 on node -1
[ 0.239948] alloc kstat_irqs on node -1
[ 0.239957] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.239968] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.240239] alloc irq_desc for 26 on node -1
[ 0.240241] alloc kstat_irqs on node -1
[ 0.240250] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.240260] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.240527] alloc irq_desc for 27 on node -1
[ 0.240529] alloc kstat_irqs on node -1
[ 0.240538] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.240549] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.241329] ACPI: AC Adapter [ADP1] (on-line)
[ 0.241625] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.241766] ACPI: Lid Switch [LID0]
[ 0.241986] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.242093] ACPI: Power Button [PWRB]
[ 0.242280] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.242387] ACPI: Sleep Button [SLPB]
[ 0.242581] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.242687] ACPI: Power Button [PWRF]
[ 0.243645] ACPI: SSDT 00000000bfeb8a90 002F0 (v01 APPLE Cpu0Ist 00003000 INTL 20050309)
[ 0.244331] ACPI: SSDT 00000000bfeb6c10 002A0 (v01 APPLE Cpu0Cst 00003001 INTL 20050309)
[ 0.244918] Monitor-Mwait will be used to enter C-1 state
[ 0.244944] Monitor-Mwait will be used to enter C-2 state
[ 0.244967] Monitor-Mwait will be used to enter C-3 state
[ 0.244973] Marking TSC unstable due to TSC halts in idle
[ 0.245106] Switching to clocksource hpet
[ 0.245190] processor LNXCPU:00: registered as cooling_device0
[ 0.245596] ACPI: SSDT 00000000bfeb7f10 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309)
[ 0.245888] Clockevents: could not switch to one-shot mode:
[ 0.245894] Clockevents: could not switch to one-shot mode: lapic is not functional.
[ 0.245897] Could not switch to high resolution mode on CPU 1
[ 0.246273] lapic is not functional.
[ 0.246369] Could not switch to high resolution mode on CPU 0
[ 0.249577] ACPI: SSDT 00000000bfeb6f10 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309)
[ 0.250383] processor LNXCPU:01: registered as cooling_device1
[ 0.259821] Non-volatile memory driver v1.3
[ 0.260136] intel_rng: FWH not detected
[ 0.260300] Linux agpgart interface v0.103
[ 0.260475] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 0.260582] Hangcheck: Using get_cycles().
[ 0.260738] [drm] Initialized drm 1.1.0 20060810
[ 0.260974] [drm] radeon defaulting to kernel modesetting.
[ 0.261117] [drm] radeon kernel modesetting enabled.
[ 0.261214] [drm:drm_init],
[ 0.261241] [drm:drm_get_dev],
[ 0.261256] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.261379] radeon 0000:01:00.0: setting latency timer to 64
[ 0.263946] [drm:drm_get_minor],
[ 0.264135] [drm:drm_get_minor], new minor assigned 64
[ 0.264138] [drm:drm_get_minor],
[ 0.264242] [drm:drm_get_minor], new minor assigned 0
[ 0.264265] [drm] radeon: Initializing kernel modesetting.
[ 0.264389] [drm] register mmio base: 0xD8300000
[ 0.264486] [drm] register mmio size: 65536
[ 0.264745] [drm:radeon_get_bios], ATOMBIOS detected
[ 0.264749] ATOM BIOS: M56P
[ 0.265128] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[ 0.265253] [drm] Generation 2 PCI interface, using max accessible memory
[ 0.265352] [drm] radeon: VRAM 256M
[ 0.265476] [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
[ 0.265573] [drm] radeon: GTT 512M
[ 0.265709] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 0.265942] alloc irq_desc for 28 on node -1
[ 0.265945] alloc kstat_irqs on node -1
[ 0.265958] radeon 0000:01:00.0: irq 28 for MSI/MSI-X
[ 0.265967] [drm:drm_irq_install], irq=28
[ 0.265994] [drm] radeon: irq initialized.
[ 0.266880] [drm] Detected VRAM RAM=256M, BAR=256M
[ 0.267954] [drm] RAM width 128bits DDR
[ 0.268137] [TTM] Zone kernel: Available graphics memory: 1531848 kiB.
[ 0.268250] [drm] radeon: 256M of VRAM memory ready
[ 0.268347] [drm] radeon: 512M of GTT memory ready.
[ 0.268460] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.270322] [drm] radeon: 1 quad pipes, 2 z pipes initialized.
[ 0.270492] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 0.270649] [drm] radeon: cp idle (0x10000C03)
[ 0.270747] [drm:r100_cp_init_microcode],
[ 0.270855] [drm] Loading R500 Microcode
[ 0.270970] platform radeon_cp.0: firmware: using built-in firmware radeon/R520_cp.bin
[ 0.271265] [drm] radeon: ring at 0x0000000020000000
[ 0.271399] [drm] ring test succeeded in 6 usecs
[ 0.271612] [drm] radeon: ib pool ready.
[ 0.271796] [drm] ib test succeeded in 0 usecs
[ 0.272033] [drm:drm_sysfs_connector_add], adding "LVDS-1" to sysfs
[ 0.272094] [drm:drm_sysfs_hotplug_event], generating hotplug event
[ 0.272144] [drm:drm_sysfs_connector_add], adding "SVIDEO-1" to sysfs
[ 0.272203] [drm:drm_sysfs_hotplug_event], generating hotplug event
[ 0.272309] [drm:drm_sysfs_connector_add], adding "DVI-I-1" to sysfs
[ 0.272426] [drm:drm_sysfs_hotplug_event], generating hotplug event
[ 0.272547] [drm:drm_sysfs_connector_add], adding "VGA-1" to sysfs
[ 0.272635] [drm:drm_sysfs_hotplug_event], generating hotplug event
[ 0.272681] [drm] Radeon Display Connectors
[ 0.272781] [drm] Connector 0:
[ 0.272921] [drm] LVDS
[ 0.273052] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 0.273157] [drm] Encoders:
[ 0.273262] [drm] LCD1: INTERNAL_LVTM1
[ 0.273421] [drm] Connector 1:
[ 0.273542] [drm] S-video
[ 0.273689] [drm] Encoders:
[ 0.273800] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 0.273949] [drm] Connector 2:
[ 0.274103] [drm] DVI-I
[ 0.274199] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 0.274310] [drm] Encoders:
[ 0.274484] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 0.274650] [drm] Connector 3:
[ 0.274745] [drm] VGA
[ 0.274856] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 0.275013] [drm] Encoders:
[ 0.275108] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 0.340067] ACPI: Battery Slot [BAT0] (battery present)
[ 0.341680] [drm:drm_helper_probe_single_connector_modes], LVDS-1
[ 0.400710] [drm:radeon_atombios_connected_scratch_regs], LCD1 connected
[ 0.400732] [drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1
[ 0.400735] [drm:drm_mode_debug_printmodeline], Modeline 17:"1440x900" 60 96310 1440 1504 1536 1760 900 903 906 912 0x48 0xa
[ 0.400740] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x854" 60 89250 1280 1352 1480 1680 854 857 867 887 0x0 0x6
[ 0.400744] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x0 0x6
[ 0.400749] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x720" 60 74500 1280 1344 1472 1664 720 723 728 748 0x0 0x6
[ 0.400753] [drm:drm_mode_debug_printmodeline], Modeline 23:"1152x768" 60 71750 1152 1216 1328 1504 768 771 781 798 0x0 0x6
[ 0.400758] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768" 60 63500 1024 1072 1176 1328 768 771 775 798 0x0 0x6
[ 0.400762] [drm:drm_mode_debug_printmodeline], Modeline 20:"800x600" 60 38250 800 832 912 1024 600 603 607 624 0x0 0x6
[ 0.400767] [drm:drm_mode_debug_printmodeline], Modeline 21:"848x480" 60 31500 848 872 952 1056 480 483 493 500 0x0 0x6
[ 0.400771] [drm:drm_mode_debug_printmodeline], Modeline 19:"720x480" 60 26750 720 744 808 896 480 483 493 500 0x0 0x6
[ 0.400775] [drm:drm_mode_debug_printmodeline], Modeline 18:"640x480" 59 23750 640 664 720 800 480 483 487 500 0x0 0x6
[ 0.400780] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1
[ 0.412826] [drm:radeon_atom_dac_detect], Bios 0 scratch 40000 00000014
[ 0.412834] [drm:radeon_atombios_connected_scratch_regs], TV1 disconnected
[ 0.412837] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 is disconnected
[ 0.412840] [drm:drm_helper_probe_single_connector_modes], DVI-I-1
[ 0.415145] [drm:radeon_atombios_connected_scratch_regs], DFP1 disconnected
[ 0.415148] [drm:drm_helper_probe_single_connector_modes], DVI-I-1 is disconnected
[ 0.415151] [drm:drm_helper_probe_single_connector_modes], VGA-1
[ 0.428824] [drm:radeon_atom_dac_detect], Bios 0 scratch 40000 00000014
[ 0.428832] [drm:radeon_atombios_connected_scratch_regs], CRT2 disconnected
[ 0.428835] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
[ 0.428838] [drm:drm_setup_crtcs],
[ 0.428841] [drm:drm_enable_connectors], connector 12 enabled? yes
[ 0.428844] [drm:drm_enable_connectors], connector 13 enabled? no
[ 0.428846] [drm:drm_enable_connectors], connector 14 enabled? no
[ 0.428849] [drm:drm_enable_connectors], connector 15 enabled? no
[ 0.428852] [drm:drm_target_preferred], looking for cmdline mode on connector 12
[ 0.428854] [drm:drm_target_preferred], looking for preferred mode on connector 12
[ 0.428857] [drm:drm_target_preferred], found mode 1440x900
[ 0.428859] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 0.428863] [drm:drm_setup_crtcs], desired mode 1440x900 set on crtc 7
[ 0.432365] [drm] fb mappable at 0xC00C0000
[ 0.432461] [drm] vram apper at 0xC0000000
[ 0.432558] [drm] size 5299200
[ 0.432653] [drm] fb depth is 24
[ 0.432748] [drm] pitch is 5888
[ 0.434783] [drm:drm_crtc_helper_set_config],
[ 0.434785] [drm:drm_crtc_helper_set_config], crtc: ffff8800bee02000 7 fb: ffff8800bd135300 connectors: ffff8800bedb2880 num_connectors: 1 (x, y) (0, 0)
[ 0.434794] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 0.434796] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[ 0.434799] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 0.434802] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 96310 1440 1504 1536 1760 900 903 906 912 0x48 0xa
[ 0.434813] [drm:drm_crtc_helper_set_config], setting connector 12 crtc to ffff8800bee02000
[ 0.434815] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 0.434817] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 96310 1440 1504 1536 1760 900 903 906 912 0x48 0xa
[ 0.434823] [drm:radeon_encoder_set_active_device], setting active device to 00000002 from 00000002 00000002 for encoder 3
[ 0.434829] [drm:radeon_atom_encoder_dpms], encoder dpms 15 to mode 3, devices 00000002, active_devices 00000002
[ 0.488819] [drm:radeon_atom_encoder_dpms], encoder dpms 22 to mode 3, devices 00000014, active_devices 00000000
[ 0.488827] [drm:radeon_atom_encoder_dpms], encoder dpms 19 to mode 3, devices 00000008, active_devices 00000000
[ 1.339803] async/0 used greatest stack depth: 4568 bytes left
[ 33.148417] [drm:radeon_compute_pll], PLL freq 96310 2 1023
[ 33.149999] executing set pll
[ 33.152421] executing set crtc timing
[ 33.152459] [drm] LVDS-9: set mode 1440x900 1c
[ 33.157425] [drm:avivo_crtc_load_lut], 0
[ 33.158418] [drm:radeon_atom_encoder_dpms], encoder dpms 15 to mode 0, devices 00000002, active_devices 00000002
[ 33.159420] [drm:radeon_atom_encoder_dpms], encoder dpms 22 to mode 3, devices 00000014, active_devices 00000000
[ 33.159428] [drm:radeon_atom_encoder_dpms], encoder dpms 19 to mode 3, devices 00000008, active_devices 00000000
[ 33.159444] [drm:avivo_crtc_load_lut], 0
[ 33.159483] [drm:avivo_crtc_load_lut], 0
[ 33.163262] [drm:drm_crtc_helper_set_config],
[ 33.163264] [drm:drm_crtc_helper_set_config], crtc: ffff8800bee02000 7 fb: ffff8800bd135300 connectors: ffff8800bedb2880 num_connectors: 1 (x, y) (0, 0)
[ 33.163271] [drm:drm_crtc_helper_set_config], setting connector 12 crtc to ffff8800bee02000
[ 33.163274] [drm:avivo_crtc_load_lut], 0
[ 33.163308] [drm:avivo_crtc_load_lut], 0
[ 33.167062] Console: switching to colour frame buffer device 180x56
[ 33.167069] [drm:drm_crtc_helper_set_config],
[ 33.167071] [drm:drm_crtc_helper_set_config], crtc: ffff8800bee02000 7 fb: ffff8800bd135300 connectors: ffff8800bedb2880 num_connectors: 1 (x, y) (0, 0)
[ 33.167077] [drm:drm_crtc_helper_set_config], setting connector 12 crtc to ffff8800bee02000
[ 33.167080] [drm:avivo_crtc_load_lut], 0
[ 33.170602] [drm:avivo_crtc_load_lut], 0
[ 33.170762] fb0: radeondrmfb frame buffer device
[ 33.170764] registered panic notifier
[ 33.170829] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 33.170945] [drm:drm_init],
[ 33.171028] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 33.174287] brd: module loaded
[ 33.175594] loop: module loaded
[ 33.175849] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 33.176265] ata_piix 0000:00:1f.1: version 2.13
[ 33.176320] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 33.176370] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 33.176488] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 33.176597] scsi0 : ata_piix
[ 33.176792] scsi1 : ata_piix
[ 33.177448] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[ 33.177489] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[ 33.177547] alloc irq_desc for 19 on node -1
[ 33.177550] alloc kstat_irqs on node -1
[ 33.177555] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 33.177599] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 33.328428] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 33.329410] scsi2 : ata_piix
[ 33.329558] scsi3 : ata_piix
[ 33.330610] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[ 33.330656] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[ 33.340242] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, 6AAE, max UDMA/66
[ 33.340451] PNP: No PS/2 controller found. Probing ports directly.
[ 33.341357] i8042.c: No controller found.
[ 33.341505] mice: PS/2 mouse device common for all mice
[ 33.341860] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 33.341931] rtc_cmos 00:08: RTC can wake from S4
[ 33.342033] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 33.342100] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 33.343237] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 33.344427] ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
[ 33.345579] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 33.346839] ata1.00: configured for UDMA/66
[ 33.348560] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 33.348821] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D 6AAE PQ: 0 ANSI: 5
[ 33.351356] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[ 33.353078] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 33.355221] cpuidle: using governor ladder
[ 33.355515] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 33.355519] Uniform CD-ROM driver Revision: 3.20
[ 33.355687] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 33.355801] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 33.362005] cpuidle: using governor menu
[ 33.363795] oprofile: using NMI interrupt.
[ 33.365390] Netfilter messages via NETLINK v0.30.
[ 33.367320] TCP cubic registered
[ 33.368934] Initializing XFRM netlink socket
[ 33.370582] NET: Registered protocol family 17
[ 33.372248] NET: Registered protocol family 15
[ 33.376103] SCTP: Hash tables configured (established 65536 bind 65536)
[ 33.379209] PM: Resume from disk failed.
[ 33.379696] Magic number: 5:333:213
[ 33.381381] power_supply ADP1: hash matches
[ 33.383107] rtc_cmos 00:08: setting system clock to 2009-12-08 05:14:09 UTC (1260249249)
[ 33.384783] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 33.763111] ata3.01: ATA-8: ST9500420AS, 0002SDM1, max UDMA/133
[ 33.766150] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 33.775186] ata3.01: configured for UDMA/133
[ 33.778337] scsi 2:0:1:0: Direct-Access ATA ST9500420AS 0002 PQ: 0 ANSI: 5
[ 33.781855] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 33.785014] sd 2:0:1:0: [sda] Write Protect is off
[ 33.785118] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 33.790988] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 33.791043] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.794366] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13
[ 33.858842] sd 2:0:1:0: [sda] Attached SCSI disk
[ 33.881869] EXT3-fs: sda5: couldn't mount because of unsupported optional features (240).
[ 33.885435] EXT2-fs: sda5: couldn't mount because of unsupported optional features (240).
[ 33.909100] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 33.912269] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 33.915472] Freeing unused kernel memory: 640k freed
[ 33.918917] Write protecting the kernel read-only data: 8180k
[ 34.885970] udev: starting version 146
[ 35.275726] sky2 driver version 1.25
[ 35.275779] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 35.275796] sky2 0000:02:00.0: setting latency timer to 64
[ 35.275831] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
[ 35.275939] alloc irq_desc for 29 on node -1
[ 35.275942] alloc kstat_irqs on node -1
[ 35.275960] sky2 0000:02:00.0: irq 29 for MSI/MSI-X
[ 35.276470] sky2 eth0: addr 00:17:f2:df:a4:2e
[ 35.323827] applesmc: Apple MacBook Pro detected:
[ 35.323830] applesmc: - Model with accelerometer
[ 35.323833] applesmc: - Model with light sensors and backlight
[ 35.323836] applesmc: - Model with 12 temperature sensors
[ 35.324511] applesmc: device has already been initialized (0xe0, 0x00).
[ 35.324514] applesmc: device successfully initialized.
[ 35.325068] applesmc: 2 fans found.
[ 35.327117] input: applesmc as /devices/platform/applesmc.768/input/input5
[ 35.327298] Registered led device: smc::kbd_backlight
[ 35.327331] applesmc: driver successfully loaded.
[ 35.467960] firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 35.524412] firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10
[ 35.564930] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 35.564951] ath9k 0000:03:00.0: setting latency timer to 64
[ 35.637255] usbcore: registered new interface driver usbfs
[ 35.637453] usbcore: registered new interface driver hub
[ 35.638471] usbcore: registered new device driver usb
[ 35.696120] ath: EEPROM regdomain: 0x64
[ 35.696123] ath: EEPROM indicates we should expect a direct regpair map
[ 35.696128] ath: Country alpha2 being used: 00
[ 35.696130] ath: Regpair used: 0x64
[ 35.699596] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 35.700059] Registered led device: ath9k-phy0::radio
[ 35.700086] Registered led device: ath9k-phy0::assoc
[ 35.700111] Registered led device: ath9k-phy0::tx
[ 35.700136] Registered led device: ath9k-phy0::rx
[ 35.700161] phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81: mem=0xffffc90005c40000, irq=17
[ 36.024796] firewire_core: created device fw0: GUID 0019e3fffe9de076, S800
[ 36.258345] uhci_hcd: USB Universal Host Controller Interface driver
[ 36.258531] alloc irq_desc for 23 on node -1
[ 36.258536] alloc kstat_irqs on node -1
[ 36.258553] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 36.258575] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 36.258584] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 36.258636] drivers/usb/core/inode.c: creating file 'devices'
[ 36.258646] drivers/usb/core/inode.c: creating file '001'
[ 36.258656] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 36.258673] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 36.258683] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 36.258688] uhci_hcd 0000:00:1d.0: Performing full reset
[ 36.258709] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 36.258744] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 36.258816] usb usb1: default language 0x0409
[ 36.258834] usb usb1: udev 1, busnum 1, minor = 0
[ 36.258839] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 36.258844] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 36.258850] usb usb1: Product: UHCI Host Controller
[ 36.258854] usb usb1: Manufacturer: Linux 2.6.32 uhci_hcd
[ 36.258859] usb usb1: SerialNumber: 0000:00:1d.0
[ 36.258979] usb usb1: uevent
[ 36.259090] usb usb1: usb_probe_device
[ 36.259097] usb usb1: configuration #1 chosen from 1 choice
[ 36.259114] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 36.259155] usb 1-0:1.0: uevent
[ 36.259252] hub 1-0:1.0: usb_probe_interface
[ 36.259257] hub 1-0:1.0: usb_probe_interface - got id
[ 36.259263] hub 1-0:1.0: USB hub found
[ 36.259278] hub 1-0:1.0: 2 ports detected
[ 36.259282] hub 1-0:1.0: standalone hub
[ 36.259285] hub 1-0:1.0: no power switching (usb 1.0)
[ 36.259290] hub 1-0:1.0: individual port over-current protection
[ 36.259295] hub 1-0:1.0: power on to power good time: 2ms
[ 36.259306] hub 1-0:1.0: local power source is good
[ 36.259310] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 36.259356] drivers/usb/core/inode.c: creating file '001'
[ 36.259452] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 36.259465] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 36.259472] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 36.259487] drivers/usb/core/inode.c: creating file '002'
[ 36.259497] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 36.259509] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 36.259518] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 36.259523] uhci_hcd 0000:00:1d.1: Performing full reset
[ 36.259543] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 36.259556] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 36.259675] usb usb2: default language 0x0409
[ 36.259691] usb usb2: udev 1, busnum 2, minor = 128
[ 36.259696] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 36.259702] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 36.259707] usb usb2: Product: UHCI Host Controller
[ 36.259712] usb usb2: Manufacturer: Linux 2.6.32 uhci_hcd
[ 36.259717] usb usb2: SerialNumber: 0000:00:1d.1
[ 36.259823] usb usb2: uevent
[ 36.259932] usb usb2: usb_probe_device
[ 36.259938] usb usb2: configuration #1 chosen from 1 choice
[ 36.259957] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 36.259999] usb 2-0:1.0: uevent
[ 36.260089] hub 2-0:1.0: usb_probe_interface
[ 36.260094] hub 2-0:1.0: usb_probe_interface - got id
[ 36.260099] hub 2-0:1.0: USB hub found
[ 36.260115] hub 2-0:1.0: 2 ports detected
[ 36.260119] hub 2-0:1.0: standalone hub
[ 36.260123] hub 2-0:1.0: no power switching (usb 1.0)
[ 36.260127] hub 2-0:1.0: individual port over-current protection
[ 36.260132] hub 2-0:1.0: power on to power good time: 2ms
[ 36.260152] hub 2-0:1.0: local power source is good
[ 36.260157] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 36.260201] drivers/usb/core/inode.c: creating file '001'
[ 36.260279] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 36.260292] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 36.260299] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 36.260314] drivers/usb/core/inode.c: creating file '003'
[ 36.260325] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 36.260338] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 36.260346] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 36.260351] uhci_hcd 0000:00:1d.2: Performing full reset
[ 36.260392] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 36.260419] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 36.260481] usb usb3: default language 0x0409
[ 36.260497] usb usb3: udev 1, busnum 3, minor = 256
[ 36.260502] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 36.260507] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 36.260513] usb usb3: Product: UHCI Host Controller
[ 36.260517] usb usb3: Manufacturer: Linux 2.6.32 uhci_hcd
[ 36.260522] usb usb3: SerialNumber: 0000:00:1d.2
[ 36.260617] usb usb3: uevent
[ 36.260723] usb usb3: usb_probe_device
[ 36.260728] usb usb3: configuration #1 chosen from 1 choice
[ 36.260743] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 36.260787] usb 3-0:1.0: uevent
[ 36.261299] hub 3-0:1.0: usb_probe_interface
[ 36.261305] hub 3-0:1.0: usb_probe_interface - got id
[ 36.261311] hub 3-0:1.0: USB hub found
[ 36.261329] hub 3-0:1.0: 2 ports detected
[ 36.261334] hub 3-0:1.0: standalone hub
[ 36.261337] hub 3-0:1.0: no power switching (usb 1.0)
[ 36.261342] hub 3-0:1.0: individual port over-current protection
[ 36.261347] hub 3-0:1.0: power on to power good time: 2ms
[ 36.261362] hub 3-0:1.0: local power source is good
[ 36.261387] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 36.262045] drivers/usb/core/inode.c: creating file '001'
[ 36.262135] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 36.262151] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 36.262158] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 36.262174] drivers/usb/core/inode.c: creating file '004'
[ 36.262183] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 36.262197] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 36.262206] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 36.262211] uhci_hcd 0000:00:1d.3: Performing full reset
[ 36.262231] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
[ 36.262260] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 36.262330] usb usb4: default language 0x0409
[ 36.262347] usb usb4: udev 1, busnum 4, minor = 384
[ 36.262352] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 36.262362] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 36.262388] usb usb4: Product: UHCI Host Controller
[ 36.262392] usb usb4: Manufacturer: Linux 2.6.32 uhci_hcd
[ 36.262397] usb usb4: SerialNumber: 0000:00:1d.3
[ 36.262504] usb usb4: uevent
[ 36.262954] usb usb4: usb_probe_device
[ 36.262961] usb usb4: configuration #1 chosen from 1 choice
[ 36.262977] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 36.263020] usb 4-0:1.0: uevent
[ 36.263118] hub 4-0:1.0: usb_probe_interface
[ 36.263124] hub 4-0:1.0: usb_probe_interface - got id
[ 36.263129] hub 4-0:1.0: USB hub found
[ 36.263145] hub 4-0:1.0: 2 ports detected
[ 36.263149] hub 4-0:1.0: standalone hub
[ 36.263153] hub 4-0:1.0: no power switching (usb 1.0)
[ 36.263157] hub 4-0:1.0: individual port over-current protection
[ 36.263161] hub 4-0:1.0: power on to power good time: 2ms
[ 36.263173] hub 4-0:1.0: local power source is good
[ 36.263177] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 36.263225] drivers/usb/core/inode.c: creating file '001'
[ 36.267162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 36.267168] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 36.267175] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 36.267246] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 36.267279] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 36.267286] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 36.267304] drivers/usb/core/inode.c: creating file '005'
[ 36.267314] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 36.267329] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[ 36.267338] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 36.267367] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 36.267405] ehci_hcd 0000:00:1d.7: debug port 1
[ 36.267415] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 36.271318] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 36.271323] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 36.271340] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8405400
[ 36.271349] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 36.275251] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 36.280390] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 36.280437] usb usb5: default language 0x0409
[ 36.280457] usb usb5: udev 1, busnum 5, minor = 512
[ 36.280462] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 36.280468] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 36.280473] usb usb5: Product: EHCI Host Controller
[ 36.280478] usb usb5: Manufacturer: Linux 2.6.32 ehci_hcd
[ 36.280482] usb usb5: SerialNumber: 0000:00:1d.7
[ 36.280590] usb usb5: uevent
[ 36.280619] usb usb5: usb_probe_device
[ 36.280624] usb usb5: configuration #1 chosen from 1 choice
[ 36.280640] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 36.280683] usb 5-0:1.0: uevent
[ 36.280714] hub 5-0:1.0: usb_probe_interface
[ 36.280719] hub 5-0:1.0: usb_probe_interface - got id
[ 36.280724] hub 5-0:1.0: USB hub found
[ 36.280738] hub 5-0:1.0: 8 ports detected
[ 36.280742] hub 5-0:1.0: standalone hub
[ 36.280746] hub 5-0:1.0: no power switching (usb 1.0)
[ 36.280750] hub 5-0:1.0: individual port over-current protection
[ 36.280755] hub 5-0:1.0: power on to power good time: 20ms
[ 36.280766] hub 5-0:1.0: local power source is good
[ 36.280771] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 36.280847] drivers/usb/core/inode.c: creating file '001'
[ 36.358399] uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
[ 36.358425] uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
[ 36.359394] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00
[ 36.359418] uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
[ 36.361395] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00
[ 36.362389] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00
[ 36.380405] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
[ 36.380416] hub 5-0:1.0: port 1: status 0501 change 0001
[ 36.380434] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
[ 36.380441] hub 5-0:1.0: port 2: status 0501 change 0001
[ 36.380458] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
[ 36.380466] hub 5-0:1.0: port 3: status 0501 change 0001
[ 36.380482] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
[ 36.380490] hub 5-0:1.0: port 4: status 0501 change 0001
[ 36.380511] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
[ 36.380519] hub 5-0:1.0: port 6: status 0501 change 0001
[ 36.380535] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
[ 36.380543] hub 5-0:1.0: port 7: status 0501 change 0001
[ 36.418004] usb usb2: uevent
[ 36.418252] usb usb4: uevent
[ 36.420026] usb usb1: uevent
[ 36.420300] usb usb3: uevent
[ 36.421724] usb usb5: uevent
[ 36.458424] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 36.459655] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 36.461551] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 36.462886] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 36.480402] hub 5-0:1.0: state 7 ports 8 chg 00de evt 0000
[ 36.480421] hub 5-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 36.531654] ehci_hcd 0000:00:1d.7: port 1 high speed
[ 36.531665] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[ 36.574858] alloc irq_desc for 22 on node -1
[ 36.574864] alloc kstat_irqs on node -1
[ 36.574877] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 36.574937] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 36.582389] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 36.631689] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 36.634363] ehci_hcd 0000:00:1d.7: port 1 high speed
[ 36.634363] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[ 36.697804] usb 5-1: udev 2, busnum 5, minor = 513
[ 36.697810] usb 5-1: New USB device found, idVendor=0424, idProduct=2502
[ 36.697816] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 36.697949] usb 5-1: uevent
[ 36.697985] usb 5-1: usb_probe_device
[ 36.697992] usb 5-1: configuration #1 chosen from 1 choice
[ 36.698341] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 36.698410] usb 5-1:1.0: uevent
[ 36.698442] hub 5-1:1.0: usb_probe_interface
[ 36.698448] hub 5-1:1.0: usb_probe_interface - got id
[ 36.698453] hub 5-1:1.0: USB hub found
[ 36.698651] hub 5-1:1.0: 2 ports detected
[ 36.698656] hub 5-1:1.0: compound device; port removable status: FR
[ 36.698660] hub 5-1:1.0: ganged power switching
[ 36.698665] hub 5-1:1.0: global over-current protection
[ 36.698669] hub 5-1:1.0: Single TT
[ 36.698673] hub 5-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 36.698678] hub 5-1:1.0: power on to power good time: 100ms
[ 36.698920] hub 5-1:1.0: local power source is good
[ 36.698925] hub 5-1:1.0: no over-current condition exists
[ 36.698930] hub 5-1:1.0: enabling power on all ports
[ 36.699211] drivers/usb/core/inode.c: creating file '002'
[ 36.699263] hub 5-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 36.700946] usb 5-1: uevent
[ 36.749656] ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
[ 36.749668] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
[ 36.749678] hub 5-0:1.0: port 2 not reset yet, waiting 50ms
[ 36.798681] usb 5-1: link qh256-0001/ffff8800bbda5d80 start 1 [1/0 us]
[ 36.800392] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
[ 36.800434] hub 5-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 36.851655] ehci_hcd 0000:00:1d.7: port 3 high speed
[ 36.851665] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
[ 36.902432] usb 5-3: new high speed USB device using ehci_hcd and address 4
[ 36.949230] mount used greatest stack depth: 4392 bytes left
[ 36.953654] ehci_hcd 0000:00:1d.7: port 3 high speed
[ 36.953666] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
[ 37.017176] usb 5-3: default language 0x0409
[ 37.025055] usb 5-3: udev 4, busnum 5, minor = 515
[ 37.025061] usb 5-3: New USB device found, idVendor=05ac, idProduct=1006
[ 37.025067] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 37.025072] usb 5-3: Product: Keyboard Hub
[ 37.025076] usb 5-3: Manufacturer: Apple, Inc.
[ 37.025081] usb 5-3: SerialNumber: 000000000000
[ 37.025215] usb 5-3: uevent
[ 37.025251] usb 5-3: usb_probe_device
[ 37.025257] usb 5-3: configuration #1 chosen from 1 choice
[ 37.025783] usb 5-3: adding 5-3:1.0 (config #1, interface 0)
[ 37.025828] usb 5-3:1.0: uevent
[ 37.025862] hub 5-3:1.0: usb_probe_interface
[ 37.025867] hub 5-3:1.0: usb_probe_interface - got id
[ 37.025872] hub 5-3:1.0: USB hub found
[ 37.026054] hub 5-3:1.0: 3 ports detected
[ 37.026060] hub 5-3:1.0: compound device; port removable status: RFR
[ 37.026064] hub 5-3:1.0: individual port power switching
[ 37.026069] hub 5-3:1.0: individual port over-current protection
[ 37.026073] hub 5-3:1.0: Single TT
[ 37.026078] hub 5-3:1.0: TT requires at most 8 FS bit times (666 ns)
[ 37.026083] hub 5-3:1.0: Port indicators are supported
[ 37.026087] hub 5-3:1.0: power on to power good time: 100ms
[ 37.026174] hub 5-3:1.0: hub controller current requirement: 200mA
[ 37.026180] hub 5-3:1.0: 100mA bus power budget for each child
[ 37.026299] hub 5-3:1.0: enabling power on all ports
[ 37.026712] drivers/usb/core/inode.c: creating file '004'
[ 37.026766] hub 5-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 37.026926] usb 5-3: uevent
[ 37.077655] ehci_hcd 0000:00:1d.7: port 4 high speed
[ 37.077667] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
[ 37.130393] usb 5-4: new high speed USB device using ehci_hcd and address 5
[ 37.130430] hub 5-3:1.0: port 2: status 0101 change 0001
[ 37.130740] hub 5-3:1.0: port 3: status 0101 change 0001
[ 37.181654] ehci_hcd 0000:00:1d.7: port 4 high speed
[ 37.181665] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
[ 37.230387] usb 5-3: link qh256-0001/ffff8800bed21900 start 2 [1/0 us]
[ 37.244808] usb 5-4: udev 5, busnum 5, minor = 516
[ 37.244814] usb 5-4: New USB device found, idVendor=05ac, idProduct=8300
[ 37.244820] usb 5-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 37.244944] usb 5-4: uevent
[ 37.244983] usb 5-4: usb_probe_device
[ 37.244989] usb 5-4: configuration #1 chosen from 1 choice
[ 37.245325] usb 5-4: adding 5-4:1.0 (config #1, interface 0)
[ 37.245388] usb 5-4:1.0: uevent
[ 37.245419] drivers/usb/core/inode.c: creating file '005'
[ 37.245474] hub 5-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 37.247054] usb 5-4: uevent
[ 37.296655] ehci_hcd 0000:00:1d.7: port 6 full speed --> companion
[ 37.296666] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
[ 37.296675] hub 5-0:1.0: port 6 not reset yet, waiting 50ms
[ 37.347387] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
[ 37.347429] hub 5-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
[ 37.398530] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
[ 37.398540] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
[ 37.398549] hub 5-0:1.0: port 7 not reset yet, waiting 50ms
[ 37.449378] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
[ 37.449420] hub 5-0:1.0: state 7 ports 8 chg 0000 evt fe80
[ 37.449435] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 37.449450] uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
[ 37.449463] hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[ 37.514389] usb usb2: suspend_rh (auto-stop)
[ 37.553387] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
[ 37.655377] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 37.775362] usb 1-2: ep0 maxpacket = 8
[ 37.789813] usb 1-2: USB quirks for this device: 2
[ 37.808821] usb 1-2: skipped 1 descriptor after interface
[ 37.808828] usb 1-2: skipped 1 descriptor after interface
[ 37.808834] usb 1-2: skipped 1 descriptor after interface
[ 37.813810] usb 1-2: default language 0x0409
[ 37.834814] usb 1-2: udev 2, busnum 1, minor = 1
[ 37.834820] usb 1-2: New USB device found, idVendor=05ac, idProduct=021a
[ 37.834826] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 37.834831] usb 1-2: Product: Apple Internal Keyboard / Trackpad
[ 37.834836] usb 1-2: Manufacturer: Apple Computer
[ 37.834970] usb 1-2: uevent
[ 37.835006] usb 1-2: usb_probe_device
[ 37.835012] usb 1-2: configuration #1 chosen from 1 choice
[ 37.836820] usb 1-2: uevent
[ 37.837829] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[ 37.841821] usb 1-2:1.0: uevent
[ 37.841878] usb 1-2: adding 1-2:1.1 (config #1, interface 1)
[ 37.843825] usb 1-2:1.1: uevent
[ 37.843883] usb 1-2: adding 1-2:1.2 (config #1, interface 2)
[ 37.846827] usb 1-2:1.2: uevent
[ 37.846890] drivers/usb/core/inode.c: creating file '002'
[ 37.846941] hub 5-1:1.0: state 7 ports 2 chg 0000 evt 0002
[ 37.847428] hub 5-1:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 37.889599] appletouch 1-2:1.1: usb_probe_interface
[ 37.889607] appletouch 1-2:1.1: usb_probe_interface - got id
[ 37.891810] appletouch: Geyser mode initialized.
[ 37.892026] input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input6
[ 37.892299] usbcore: registered new interface driver appletouch
[ 37.951433] hub 5-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 37.962428] hub 5-1:1.0: port 1 not reset yet, waiting 10ms
[ 38.020518] usbcore: registered new interface driver hiddev
[ 38.021078] usbhid 1-2:1.0: usb_probe_interface
[ 38.021085] usbhid 1-2:1.0: usb_probe_interface - got id
[ 38.021415] usbhid 1-2:1.2: usb_probe_interface
[ 38.021421] usbhid 1-2:1.2: usb_probe_interface - got id
[ 38.021690] usbcore: registered new interface driver usbhid
[ 38.021758] usbhid: v2.6:USB HID core driver
[ 38.024568] usb 5-1.1: new high speed USB device using ehci_hcd and address 8
[ 38.027608] usb 1-2:1.1: uevent
[ 38.027838] usb 1-2: uevent
[ 38.029256] usb 1-2:1.1: uevent
[ 38.029472] usb 1-2: uevent
[ 38.030161] usb 1-2:1.1: uevent
[ 38.032027] usb 1-2:1.1: uevent
[ 38.035431] hub 5-1:1.0: port 1 not reset yet, waiting 10ms
[ 38.109925] usb 5-1.1: default language 0x0409
[ 38.110300] usb 5-1.1: udev 8, busnum 5, minor = 519
[ 38.110306] usb 5-1.1: New USB device found, idVendor=03f0, idProduct=1f04
[ 38.110311] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 38.110317] usb 5-1.1: Product: Deskjet D4300 series
[ 38.110322] usb 5-1.1: Manufacturer: HP
[ 38.110326] usb 5-1.1: SerialNumber: TH91S1715X057Q
[ 38.110471] usb 5-1.1: uevent
[ 38.110503] usb 5-1.1: usb_probe_device
[ 38.110510] usb 5-1.1: configuration #1 chosen from 1 choice
[ 38.110926] usb 5-1.1: adding 5-1.1:1.0 (config #1, interface 0)
[ 38.110976] usb 5-1.1:1.0: uevent
[ 38.111085] drivers/usb/core/inode.c: creating file '008'
[ 38.111130] hub 5-3:1.0: state 7 ports 3 chg 000c evt 0000
[ 38.111306] hub 5-3:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 38.112025] usb 5-1.1: uevent
[ 38.122430] hub 5-3:1.0: port 2 not reset yet, waiting 10ms
[ 38.151714] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input7
[ 38.151742] uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us
[ 38.152015] apple 0003:05AC:021A.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0
[ 38.154949] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2/input/input8
[ 38.154970] uhci_hcd 0000:00:1d.0: reserve dev 2 ep84-INT, period 8, phase 4, 12 us
[ 38.155088] apple 0003:05AC:021A.0002: input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
[ 38.156169] usb 1-2:1.0: uevent
[ 38.156456] usb 1-2: uevent
[ 38.158621] usb 1-2:1.0: uevent
[ 38.162147] usb 1-2:1.2: uevent
[ 38.162387] usb 1-2: uevent
[ 38.167513] usblp 5-1.1:1.0: usb_probe_interface
[ 38.167520] usblp 5-1.1:1.0: usb_probe_interface - got id
[ 38.167806] drivers/usb/core/file.c: looking for a minor, starting at 0
[ 38.168056] usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1F04
[ 38.168098] usbcore: registered new interface driver usblp
[ 38.169197] usb 1-2:1.2: uevent
[ 38.184433] usb 5-3.2: new low speed USB device using ehci_hcd and address 9
[ 38.196428] hub 5-3:1.0: port 2 not reset yet, waiting 10ms
[ 38.274055] usb 5-3.2: skipped 1 descriptor after interface
[ 38.274062] usb 5-3.2: skipped 1 descriptor after interface
[ 38.274549] usb 5-3.2: default language 0x0409
[ 38.276679] usb 5-3.2: udev 9, busnum 5, minor = 520
[ 38.276685] usb 5-3.2: New USB device found, idVendor=05ac, idProduct=0220
[ 38.276690] usb 5-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 38.276696] usb 5-3.2: Product: Apple Keyboard
[ 38.276700] usb 5-3.2: Manufacturer: Apple, Inc
[ 38.276815] usb 5-3.2: uevent
[ 38.276847] usb 5-3.2: usb_probe_device
[ 38.276853] usb 5-3.2: configuration #1 chosen from 1 choice
[ 38.277283] usb 5-3.2: adding 5-3.2:1.0 (config #1, interface 0)
[ 38.277329] usb 5-3.2:1.0: uevent
[ 38.277383] usbhid 5-3.2:1.0: usb_probe_interface
[ 38.277389] usbhid 5-3.2:1.0: usb_probe_interface - got id
[ 38.278415] usb 5-3.2: uevent
[ 38.281248] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3.2/5-3.2:1.0/input/input9
[ 38.281281] usb 5-3.2: link qh8-0601/ffff8800bb9f8880 start 3 [1/2 us]
[ 38.281429] apple 0003:05AC:0220.0003: input,hidraw2: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-3.2/input0
[ 38.281485] usb 5-3.2: adding 5-3.2:1.1 (config #1, interface 1)
[ 38.281526] usb 5-3.2:1.1: uevent
[ 38.281575] usbhid 5-3.2:1.1: usb_probe_interface
[ 38.281581] usbhid 5-3.2:1.1: usb_probe_interface - got id
[ 38.284817] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3.2/5-3.2:1.1/input/input10
[ 38.284846] usb 5-3.2: link qh8-0601/ffff8800bb9f8400 start 4 [1/2 us]
[ 38.284974] apple 0003:05AC:0220.0004: input,hidraw3: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-3.2/input1
[ 38.285041] drivers/usb/core/inode.c: creating file '009'
[ 38.285666] hub 5-3:1.0: 280mA power budget left
[ 38.285805] hub 5-3:1.0: port 3, status 0101, change 0000, 12 Mb/s
[ 38.287111] usb 5-3.2:1.0: uevent
[ 38.287355] usb 5-3.2: uevent
[ 38.289779] usb 5-3.2:1.1: uevent
[ 38.289844] usb 5-3.2:1.0: uevent
[ 38.289991] usb 5-3.2: uevent
[ 38.292769] usb 5-3.2:1.1: uevent
[ 38.296431] hub 5-3:1.0: port 3 not reset yet, waiting 10ms
[ 38.358443] usb 5-3.3: new low speed USB device using ehci_hcd and address 10
[ 38.369566] hub 5-3:1.0: port 3 not reset yet, waiting 10ms
[ 38.445806] usb 5-3.3: skipped 1 descriptor after interface
[ 38.446188] usb 5-3.3: default language 0x0409
[ 38.449052] usb 5-3.3: udev 10, busnum 5, minor = 521
[ 38.449058] usb 5-3.3: New USB device found, idVendor=05ac, idProduct=0304
[ 38.449064] usb 5-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 38.449069] usb 5-3.3: Product: Apple Optical USB Mouse
[ 38.449074] usb 5-3.3: Manufacturer: Primax Electronics
[ 38.449259] usb 5-3.3: uevent
[ 38.449296] usb 5-3.3: usb_probe_device
[ 38.449304] usb 5-3.3: configuration #1 chosen from 1 choice
[ 38.449557] usb 5-3.3: adding 5-3.3:1.0 (config #1, interface 0)
[ 38.449605] usb 5-3.3:1.0: uevent
[ 38.449641] usbhid 5-3.3:1.0: usb_probe_interface
[ 38.449646] usbhid 5-3.3:1.0: usb_probe_interface - got id
[ 38.450993] usb 5-3.3: uevent
[ 38.452456] input: Primax Electronics Apple Optical USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3.3/5-3.3:1.0/input/input11
[ 38.452699] apple 0003:05AC:0304.0005: input,hidraw4: USB HID v1.10 Mouse [Primax Electronics Apple Optical USB Mouse] on usb-0000:00:1d.7-3.3/input0
[ 38.452761] drivers/usb/core/inode.c: creating file '010'
[ 38.452807] hub 5-3:1.0: 180mA power budget left
[ 38.452814] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 38.452831] uhci_hcd 0000:00:1d.2: port 2 portsc 0093,00
[ 38.452845] hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[ 38.457893] usb 5-3.3:1.0: uevent
[ 38.458120] usb 5-3.3: uevent
[ 38.458498] usb 5-3.3:1.0: uevent
[ 38.458707] usb 5-3.3: uevent
[ 38.460490] usb 5-3.3:1.0: uevent
[ 38.461795] usb 5-3.3:1.0: uevent
[ 38.556369] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
[ 38.658364] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 38.764460] hub 2-0:1.0: hub_suspend
[ 38.764472] usb usb2: bus auto-suspend
[ 38.764477] usb usb2: suspend_rh
[ 38.778354] usb 3-2: ep0 maxpacket = 8
[ 38.805489] usb 3-2: skipped 1 descriptor after interface
[ 38.810484] usb 3-2: default language 0x0409
[ 38.828485] usb 3-2: udev 2, busnum 3, minor = 257
[ 38.828491] usb 3-2: New USB device found, idVendor=05ac, idProduct=8240
[ 38.828496] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 38.828502] usb 3-2: Product: IR Receiver
[ 38.828506] usb 3-2: Manufacturer: Apple Computer, Inc.
[ 38.828640] usb 3-2: uevent
[ 38.828677] usb 3-2: usb_probe_device
[ 38.828683] usb 3-2: configuration #1 chosen from 1 choice
[ 38.830474] usb 3-2: uevent
[ 38.831581] usb 3-2: adding 3-2:1.0 (config #1, interface 0)
[ 38.831683] usb 3-2:1.0: uevent
[ 38.831717] usbhid 3-2:1.0: usb_probe_interface
[ 38.831722] usbhid 3-2:1.0: usb_probe_interface - got id
[ 38.837491] drivers/usb/core/file.c: looking for a minor, starting at 96
[ 38.837625] generic-usb 0003:05AC:8240.0006: hiddev96,hidraw5: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
[ 38.837686] drivers/usb/core/inode.c: creating file '002'
[ 38.837730] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 38.837746] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00
[ 38.837760] hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 38.941370] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 39.043359] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 39.214395] usb 4-1: skipped 1 descriptor after interface
[ 39.214403] usb 4-1: skipped 1 descriptor after interface
[ 39.214409] usb 4-1: udev 2, busnum 4, minor = 385
[ 39.214415] usb 4-1: New USB device found, idVendor=05ac, idProduct=1000
[ 39.214420] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 39.214550] usb 4-1: uevent
[ 39.214585] usb 4-1: usb_probe_device
[ 39.214591] usb 4-1: configuration #1 chosen from 1 choice
[ 39.216430] usb 4-1: uevent
[ 39.218407] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[ 39.218456] usb 4-1:1.0: uevent
[ 39.218491] usbhid 4-1:1.0: usb_probe_interface
[ 39.218496] usbhid 4-1:1.0: usb_probe_interface - got id
[ 39.235856] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input12
[ 39.235879] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
[ 39.236009] generic-usb 0003:05AC:1000.0007: input,hidraw6: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
[ 39.236069] usb 4-1: adding 4-1:1.1 (config #1, interface 1)
[ 39.236113] usb 4-1:1.1: uevent
[ 39.236143] usbhid 4-1:1.1: usb_probe_interface
[ 39.236148] usbhid 4-1:1.1: usb_probe_interface - got id
[ 39.241867] usb 4-1:1.0: uevent
[ 39.242276] usb 4-1: uevent
[ 39.244645] usb 4-1:1.0: uevent
[ 39.267840] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1/input/input13
[ 39.268022] generic-usb 0003:05AC:1000.0008: input,hidraw7: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
[ 39.268080] drivers/usb/core/inode.c: creating file '002'
[ 39.268125] hub 5-1:1.0: state 7 ports 2 chg 0000 evt 0002
[ 39.268808] hub 5-3:1.0: state 7 ports 3 chg 0000 evt 0008
[ 39.273549] usb 4-1:1.1: uevent
[ 39.273568] usb 4-1:1.1: uevent
[ 39.273811] usb 4-1: uevent
[ 39.273821] usb 4-1: uevent
[ 39.276023] usb 4-1:1.1: uevent
[ 39.276815] usb 4-1:1.1: uevent
[ 40.589044] kjournald starting. Commit interval 5 seconds
[ 40.589445] EXT3 FS on sda3, internal journal
[ 40.589457] EXT3-fs: mounted filesystem with writeback data mode.
[ 40.624787] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 40.662463] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 40.671353] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
[ 40.671378] REISERFS (device sda8): using ordered data mode
[ 40.683410] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 40.684141] REISERFS (device sda8): checking transaction log (sda8)
[ 40.708221] REISERFS (device sda8): Using r5 hash to sort names
[ 40.759070] REISERFS (device sda9): found reiserfs format "3.6" with standard journal
[ 40.759099] REISERFS (device sda9): using ordered data mode
[ 40.767150] REISERFS (device sda9): journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 40.768039] REISERFS (device sda9): checking transaction log (sda9)
[ 40.801795] REISERFS (device sda9): Using r5 hash to sort names
[ 40.850728] EXT4-fs (sda10): mounted filesystem with ordered data mode
[ 40.886607] EXT4-fs (sda11): mounted filesystem with ordered data mode
[ 40.926529] EXT4-fs (sda13): mounted filesystem with ordered data mode
[ 41.322116] Adding 2096472k swap on /dev/sda12. Priority:-1 extents:1 across:2096472k
[ 44.712707] sed used greatest stack depth: 4336 bytes left
[ 45.753589] [drm:drm_crtc_helper_set_config],
[ 45.753593] [drm:drm_crtc_helper_set_config], crtc: ffff8800bee02000 7 fb: ffff8800bd135300 connectors: ffff8800bedb2880 num_connectors: 1 (x, y) (0, 0)
[ 45.753611] [drm:drm_crtc_helper_set_config], setting connector 12 crtc to ffff8800bee02000
[ 45.753619] [drm:avivo_crtc_load_lut], 0
[ 45.753656] [drm:avivo_crtc_load_lut], 0
[ 49.440294] usb usb1: uevent
[ 49.440481] usb 1-0:1.0: uevent
[ 49.440593] usb 1-2: uevent
[ 49.440767] usb 1-2:1.0: uevent
[ 49.441910] usb 1-2:1.1: uevent
[ 49.442531] usb 1-2:1.2: uevent
[ 49.443329] usb usb2: uevent
[ 49.443507] usb 2-0:1.0: uevent
[ 49.443705] usb usb3: uevent
[ 49.443911] usb 3-0:1.0: uevent
[ 49.444022] usb 3-2: uevent
[ 49.444195] usb 3-2:1.0: uevent
[ 49.444754] usb usb4: uevent
[ 49.444928] usb 4-0:1.0: uevent
[ 49.445038] usb 4-1: uevent
[ 49.445277] usb 4-1:1.0: uevent
[ 49.445905] usb 4-1:1.1: uevent
[ 49.446844] usb usb5: uevent
[ 49.447019] usb 5-0:1.0: uevent
[ 49.447130] usb 5-1: uevent
[ 49.447342] usb 5-1.1: uevent
[ 49.447522] usb 5-1.1:1.0: uevent
[ 49.447773] usb 5-1:1.0: uevent
[ 49.447883] usb 5-3: uevent
[ 49.448063] usb 5-3.2: uevent
[ 49.448263] usb 5-3.2:1.0: uevent
[ 49.448951] usb 5-3.2:1.1: uevent
[ 49.449616] usb 5-3.3: uevent
[ 49.449794] usb 5-3.3:1.0: uevent
[ 49.450663] usb 5-3:1.0: uevent
[ 49.450774] usb 5-4: uevent
[ 49.450946] usb 5-4:1.0: uevent
[ 49.688274] uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us
[ 50.682520] Bluetooth: Core ver 2.15
[ 50.682614] NET: Registered protocol family 31
[ 50.682618] Bluetooth: HCI device and connection manager initialized
[ 50.682624] Bluetooth: HCI socket layer initialized
[ 50.800416] Bluetooth: L2CAP ver 2.14
[ 50.800421] Bluetooth: L2CAP socket layer initialized
[ 50.862954] usb usb2: usb auto-resume
[ 50.862962] usb usb2: wakeup_rh
[ 50.894519] hub 2-0:1.0: hub_resume
[ 50.894565] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 50.906336] usb 4-1: uhci_result_common: failed with status 520000
[ 50.906364] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -71
[ 50.909327] usb 4-1: uhci_result_common: failed with status 440000
[ 50.909341] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
[ 50.922203] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
[ 50.925327] usb 4-1: uhci_result_common: failed with status 440000
[ 50.925340] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
[ 50.944690] hub 5-0:1.0: state 7 ports 8 chg 0000 evt ff80
[ 50.944711] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
[ 50.944726] hub 5-0:1.0: port 7, status 0501, change 0001, 480 Mb/s
[ 50.951200] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
[ 50.954327] usb 4-1: uhci_result_common: failed with status 440000
[ 50.954340] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
[ 51.006208] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
[ 51.009326] usb 4-1: uhci_result_common: failed with status 440000
[ 51.009338] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
[ 51.013087] Bluetooth: RFCOMM TTY layer initialized
[ 51.013098] Bluetooth: RFCOMM socket layer initialized
[ 51.013103] Bluetooth: RFCOMM ver 1.11
[ 51.024909] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 51.050144] hub 5-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501
[ 51.050459] Bluetooth: SCO (Voice Link) ver 0.6
[ 51.050464] Bluetooth: SCO socket layer initialized
[ 51.100413] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
[ 51.100426] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
[ 51.100437] hub 5-0:1.0: port 7 not reset yet, waiting 50ms
[ 51.113204] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
[ 51.116330] usb 4-1: uhci_result_common: failed with status 440000
[ 51.116344] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
[ 51.151208] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
[ 51.151247] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 51.151261] uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00
[ 51.151277] hub 4-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
[ 51.151282] usb 4-1: USB disconnect, address 2
[ 51.151285] usb 4-1: unregistering device
[ 51.151289] usb 4-1: usb_disable_device nuking all URBs
[ 51.151298] usb 4-1: unregistering interface 4-1:1.0
[ 51.158485] usb 4-1:1.0: uevent
[ 51.158509] usb 4-1: unregistering interface 4-1:1.1
[ 51.164478] usb 4-1:1.1: uevent
[ 51.164655] usb 4-1: uevent
[ 51.268210] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 51.370211] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 51.555347] usb 4-1: skipped 1 descriptor after interface
[ 51.555382] usb 4-1: udev 3, busnum 4, minor = 386
[ 51.555386] usb 4-1: New USB device found, idVendor=05ac, idProduct=8205
[ 51.555390] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 51.555505] usb 4-1: uevent
[ 51.555535] usb 4-1: usb_probe_device
[ 51.555540] usb 4-1: configuration #1 chosen from 1 choice
[ 51.557418] usb 4-1: uevent
[ 51.559376] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[ 51.559420] usb 4-1:1.0: uevent
[ 51.560998] usb 4-1: adding 4-1:1.1 (config #1, interface 1)
[ 51.561037] usb 4-1:1.1: uevent
[ 51.561104] usb 4-1: adding 4-1:1.2 (config #1, interface 2)
[ 51.561134] usb 4-1:1.2: uevent
[ 51.561161] drivers/usb/core/inode.c: creating file '003'
[ 51.561244] hub 5-0:1.0: state 7 ports 8 chg 0000 evt fe80
[ 51.582699] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 51.582742] btusb 4-1:1.0: usb_probe_interface
[ 51.582746] btusb 4-1:1.0: usb_probe_interface - got id
[ 51.583295] uhci_hcd 0000:00:1d.3: reserve dev 3 ep81-INT, period 1, phase 0, 23 us
[ 51.583718] btusb 4-1:1.2: usb_probe_interface
[ 51.583723] btusb 4-1:1.2: usb_probe_interface - got id
[ 51.583759] usbcore: registered new interface driver btusb
[ 52.014235] usb usb2: suspend_rh (auto-stop)
[ 53.764216] hub 2-0:1.0: hub_suspend
[ 53.764231] usb usb2: bus auto-suspend
[ 53.764236] usb usb2: suspend_rh
[ 54.254629] sky2 eth0: enabling interface
[ 55.938546] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
\
 
 \ /
  Last update: 2009-12-08 06:29    [W:0.257 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site