lkml.org 
[lkml]   [2009]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [BISECTED, REGRESSION] Successful resume from suspend but freezes after I/O
Date
On Monday 07 December 2009 20:23:08 Yinghai Lu wrote:
> Volker Lanz wrote:
> > On Monday 07 December 2009 19:24:02 Yinghai Lu wrote:
> >> Volker Lanz wrote:
> >>> Hi,
> >>>
> >>> updating to my distro's new 2.6.31 kernel on an x86_64 quad core
> >>> machine with 6 GB of RAM I noticed resuming from suspend still worked
> >>> as before, but the machine will now reproducably freeze (have to hard
> >>> reset) afterwards as soon as I do something disk I/O heavy, though the
> >>> problem is probably not related to disk activity at all.
> >>>
> >>> A current mainline 2.6.32 checkout shows the same behaviour.
> >>>
> >>> I git-bisected the problem to this commit:
> >>>
> >>>
> >>> -----------------------------------------------------------------------
> >>>-- ---- commit 78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
> >>> Author: Yinghai Lu <yinghai@kernel.org>
> >>> Date: Thu Mar 12 22:36:01 2009 -0700
> >>>
> >>> x86: make e820_update_range() handle small range update
> >>>
> >>> Impact: enhance e820 code to handle more cases
> >>>
> >>> Try to handle new range which could be covered by one entry.
> >>>
> >>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> >>> Cc: jbeulich@novell.com
> >>> LKML-Reference: <49B9F0C1.10402@kernel.org>
> >>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> >>> -----------------------------------------------------------------------
> >>>-- ----
> >>>
> >>>
> >>> A kernel built from this revision does not boot, so the first booting
> >>> kernel to show the problem actually seems to be:
> >>>
> >>>
> >>> -----------------------------------------------------------------------
> >>>-- ---- commit 6d7942dc2a70a7e74c352107b150265602671588
> >>> Author: Yinghai Lu <yinghai@kernel.org>
> >>> Date: Sat Mar 14 14:32:41 2009 -0700
> >>>
> >>> x86: fix 64k corruption-check
> >>>
> >>> Impact: fix boot crash
> >>>
> >>> Need to exit early if the addr is far above 64k.
> >>>
> >>> The crash got exposed by:
> >>>
> >>> 78a8b35: x86: make e820_update_range() handle small range update
> >>>
> >>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> >>> Cc: <stable@kernel.org>
> >>> LKML-Reference: <49BC2279.2030101@kernel.org>
> >>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> >>> -----------------------------------------------------------------------
> >>>-- ----
> >>>
> >>>
> >>> The last kernel to work without problems thus seems to be this one:
> >>>
> >>>
> >>> -----------------------------------------------------------------------
> >>>-- ---- commit 773e673de27297d07d852e7e9bfd1a695cae1da2
> >>> Author: Yinghai Lu <yinghai@kernel.org>
> >>> Date: Thu Mar 12 21:35:18 2009 -0700
> >>>
> >>> x86: fix e820_update_range()
> >>>
> >>> Impact: fix left range size on head
> >>>
> >>> | commit 5c0e6f035df983210e4d22213aed624ced502d3d
> >>> | x86: fix code paths used by update_mptable
> >>> | Impact: fix crashes under Xen due to unrobust e820 code
> >>>
> >>> fixes one e820 bug, but introduces another bug.
> >>>
> >>> Need to update size for left range at first in case it is header.
> >>>
> >>> also add __e820_add_region take more parameter.
> >>>
> >>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> >>> Cc: jbeulich@novell.com
> >>> LKML-Reference: <49B9E286.502@kernel.org>
> >>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> >>> -----------------------------------------------------------------------
> >>>-- ----
> >>>
> >>>
> >>> The problem is 100% reproducable on this machine: Resuming and then
> >>> copying /usr/ to $HOME will freeze after a few hundred MB have been
> >>> copied. Earlier kernels worked fine for the last couple of months.
> >>>
> >>> What additional information is required to help diagnose and hopefully
> >>> fix the problem?
> >>
> >> whole boot log with CONFIG_PCI_DEBUG and debug on command line.
> >
> > Here it is. It's huge, I hope you were expecting that...
>
> and the one with current tip?
>
> http://people.redhat.com/mingo/tip.git/readme.txt

With this kernel, the problem persists. Here's the log:


-----------------------------------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-tip-02731-gd17424f (vl@trevor) (gcc
version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #22 SMP Mon Dec 7 21:09:21 CET 2009
[ 0.000000] Command line: root=UUID=160351ee-c9b0-4a72-9fd5-9962c8137a7e ro
nosplash debug
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee2000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 1B0000000 mask FF0000000 uncachable
[ 0.000000] 6 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable)
==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] modified: 00000000cfee0000 - 00000000cfee2000 (ACPI NVS)
[ 0.000000] modified: 00000000cfee2000 - 00000000cfef0000 (ACPI data)
[ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ c000-12000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000
[ 0.000000] 0100000000 - 01b0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1b0000000 @ 10000-18000
[ 0.000000] RAMDISK: 34054000 - 37fef801
[ 0.000000] ACPI: RSDP 00000000000f7280 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee2040 0004C (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee20c0 00074 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee2180 04CD9 (v01 GBT GBTUACPI 00001000
MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: EUDS 00000000cfee7580 00500 (v01 GBT 00000000
00000000)
[ 0.000000] ACPI: HPET 00000000cfee74c0 00038 (v01 GBT GBTUACPI 42302E31
GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee7540 0003C (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000cfee6ec0 00084 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000cfee83b0 0018A (v01 PmRef Cpu0Cst 00003001
INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000cfee8540 0018A (v01 PmRef Cpu1Cst 00003001
INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000cfee86d0 0018A (v01 PmRef Cpu2Cst 00003001
INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000cfee8860 0018A (v01 PmRef Cpu3Cst 00003001
INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000cfee89f0 003AB (v01 PmRef CpuPm 00003000
INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] found SMP MP-table at [ffff8800000f5890] f5890
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001b0000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001b0000000
[ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff]
[ 0.000000] bootmap [0000000000018000 - 000000000004dfff] pages 36
[ 0.000000] (13 early reservations) ==> bootmem [0000000000 - 01b0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #2 [0001000000 - 0001c89284] TEXT DATA BSS ==> [0001000000
- 0001c89284]
[ 0.000000] #3 [0034054000 - 0037fef801] RAMDISK ==> [0034054000
- 0037fef801]
[ 0.000000] #4 [0001c8a000 - 0001c8a0f6] BRK ==> [0001c8a000
- 0001c8a0f6]
[ 0.000000] #5 [0000008000 - 000000c000] ACPI WAKEUP ==> [0000008000
- 000000c000]
[ 0.000000] #6 [000000c000 - 0000010000] PGTABLE ==> [000000c000
- 0000010000]
[ 0.000000] #7 [0000010000 - 0000013000] PGTABLE ==> [0000010000
- 0000013000]
[ 0.000000] #8 [00000f58a0 - 0000100000] BIOS reserved ==> [00000f58a0
- 0000100000]
[ 0.000000] #9 [00000f5890 - 00000f58a0] MP-table mpf ==> [00000f5890
- 00000f58a0]
[ 0.000000] #10 [000009f800 - 00000f0d00] BIOS reserved ==>
[000009f800 - 00000f0d00]
[ 0.000000] #11 [00000f0ebc - 00000f5890] BIOS reserved ==>
[00000f0ebc - 00000f5890]
[ 0.000000] #12 [00000f0d00 - 00000f0ebc] MP-table mpc ==>
[00000f0d00 - 00000f0ebc]
[ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff880028600000-
ffff88002dbfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1572474
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 109 pages reserved
[ 0.000000] DMA zone: 3829 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 9856 pages used for memmap
[ 0.000000] Normal zone: 711040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 -
0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 -
00000000cfee2000
[ 0.000000] PM: Registered nosave memory: 00000000cfee2000 -
00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 -
00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 -
00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at e4000000 (gap:
e4000000:1ac00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91416 r8192
d23272 u524288
[ 0.000000] pcpu-alloc: s91416 r8192 d23272 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1548173
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=160351ee-
c9b0-4a72-9fd5-9962c8137a7e ro nosplash debug
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6057076k/7077888k available (5318k kernel code, 787992k
absent, 232820k reserved, 5695k data, 652k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2833.355 MHz processor.
[ 0.010005] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5666.71 BogoMIPS (lpj=28333550)
[ 0.010102] Security Framework initialized
[ 0.010145] SELinux: Disabled at boot.
[ 0.010690] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.015409] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.017728] Mount-cache hash table entries: 256
[ 0.017893] Initializing cgroup subsys ns
[ 0.017935] Initializing cgroup subsys cpuacct
[ 0.017975] Initializing cgroup subsys memory
[ 0.018017] Initializing cgroup subsys freezer
[ 0.018056] Initializing cgroup subsys net_cls
[ 0.018112] CPU 0/0x0 -> Node 0
[ 0.018149] CPU: Physical Processor ID: 0
[ 0.018187] CPU: Processor Core ID: 0
[ 0.018226] mce: CPU supports 6 MCE banks
[ 0.018269] CPU0: Thermal monitoring enabled (TM2)
[ 0.018309] using mwait in idle threads.
[ 0.018347] Performance Events: Core2 events, Intel PMU driver.
[ 0.018442] ... version: 2
[ 0.018479] ... bit width: 40
[ 0.018517] ... generic registers: 2
[ 0.018555] ... value mask: 000000ffffffffff
[ 0.018594] ... max period: 000000007fffffff
[ 0.018632] ... fixed-purpose events: 3
[ 0.018670] ... event mask: 0000000700000003
[ 0.019692] ACPI: Core revision 20090903
[ 0.027900] Setting APIC routing to flat
[ 0.028240] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.127856] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.130000] Booting processor 1 APIC 0x3 ip 0x6000
[ 0.130000] Initializing CPU#1
[ 0.130000] CPU 1/0x3 -> Node 0
[ 0.130000] CPU: Physical Processor ID: 0
[ 0.130000] CPU: Processor Core ID: 3
[ 0.130000] CPU1: Thermal monitoring enabled (TM2)
[ 0.280090] CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.290059] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.290050] Initializing CPU#2
[ 0.290050] CPU 2/0x2 -> Node 0
[ 0.290050] CPU: Physical Processor ID: 0
[ 0.290050] CPU: Processor Core ID: 2
[ 0.290050] CPU2: Thermal monitoring enabled (TM2)
[ 0.450090] CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.460059] Booting processor 3 APIC 0x1 ip 0x6000
[ 0.460049] Initializing CPU#3
[ 0.460049] CPU 3/0x1 -> Node 0
[ 0.460049] CPU: Physical Processor ID: 0
[ 0.460049] CPU: Processor Core ID: 1
[ 0.460049] CPU3: Thermal monitoring enabled (TM2)
[ 0.620088] CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.630013] Brought up 4 CPUs
[ 0.630052] Total of 4 processors activated (22664.82 BogoMIPS).
[ 0.632719] regulator: core version 0.5
[ 0.632778] Time: 21:22:24 Date: 12/07/09
[ 0.632844] NET: Registered protocol family 16
[ 0.632966] ACPI: bus type pci registered
[ 0.633053] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.633094] PCI: MCFG area at e0000000 reserved in E820
[ 0.634412] PCI: Using MMCONFIG at e0000000 - e3ffffff
[ 0.634451] PCI: Using configuration type 1 for base access
[ 0.635112] bio: create slab <bio-0> at 0
[ 0.635613] ACPI: EC: Look up EC in DSDT
[ 0.640352] ACPI: Interpreter enabled
[ 0.640395] ACPI: (supports S0 S3 S4 S5)
[ 0.640553] ACPI: Using IOAPIC for interrupt routing
[ 0.644231] ACPI: No dock devices found.
[ 0.644344] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.644402] PCI: Scanning bus 0000:00
[ 0.644445] pci 0000:00:00.0: found [8086:2e20] class 000600 header type 00
[ 0.644503] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.644544] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.644597] pci 0000:00:01.0: found [8086:2e21] class 000604 header type 01
[ 0.644651] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.644692] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.644741] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.644782] pci 0000:00:01.0: PME# disabled
[ 0.644848] pci 0000:00:1a.0: found [8086:3a37] class 000c03 header type 00
[ 0.644913] pci 0000:00:1a.0: reg 20 io port: [0xe100-0xe11f]
[ 0.644962] pci 0000:00:1a.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.645003] pci 0000:00:1a.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.645064] pci 0000:00:1a.1: found [8086:3a38] class 000c03 header type 00
[ 0.645128] pci 0000:00:1a.1: reg 20 io port: [0xe200-0xe21f]
[ 0.645177] pci 0000:00:1a.1: calling quirk_resource_alignment+0x0/0x19f
[ 0.645218] pci 0000:00:1a.1: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.645278] pci 0000:00:1a.2: found [8086:3a39] class 000c03 header type 00
[ 0.645343] pci 0000:00:1a.2: reg 20 io port: [0xe000-0xe01f]
[ 0.645391] pci 0000:00:1a.2: calling quirk_resource_alignment+0x0/0x19f
[ 0.645432] pci 0000:00:1a.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.645498] pci 0000:00:1a.7: found [8086:3a3c] class 000c03 header type 00
[ 0.645552] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe9305000-0xe93053ff]
[ 0.645617] pci 0000:00:1a.7: calling quirk_resource_alignment+0x0/0x19f
[ 0.645658] pci 0000:00:1a.7: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.645723] pci 0000:00:1b.0: found [8086:3a3e] class 000403 header type 00
[ 0.645777] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe9300000-0xe9303fff]
[ 0.645835] pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.645876] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.645930] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.645972] pci 0000:00:1b.0: PME# disabled
[ 0.646022] pci 0000:00:1c.0: found [8086:3a40] class 000604 header type 01
[ 0.646080] pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.646121] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.646178] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.646219] pci 0000:00:1c.0: PME# disabled
[ 0.646272] pci 0000:00:1c.3: found [8086:3a46] class 000604 header type 01
[ 0.646330] pci 0000:00:1c.3: calling quirk_resource_alignment+0x0/0x19f
[ 0.646370] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.646428] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.646469] pci 0000:00:1c.3: PME# disabled
[ 0.646520] pci 0000:00:1c.4: found [8086:3a48] class 000604 header type 01
[ 0.646578] pci 0000:00:1c.4: calling quirk_resource_alignment+0x0/0x19f
[ 0.646619] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.646676] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.646717] pci 0000:00:1c.4: PME# disabled
[ 0.646771] pci 0000:00:1d.0: found [8086:3a34] class 000c03 header type 00
[ 0.646836] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f]
[ 0.646885] pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.646926] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.646986] pci 0000:00:1d.1: found [8086:3a35] class 000c03 header type 00
[ 0.647051] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f]
[ 0.647099] pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x19f
[ 0.647140] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.647201] pci 0000:00:1d.2: found [8086:3a36] class 000c03 header type 00
[ 0.647266] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f]
[ 0.647314] pci 0000:00:1d.2: calling quirk_resource_alignment+0x0/0x19f
[ 0.647355] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.647420] pci 0000:00:1d.7: found [8086:3a3a] class 000c03 header type 00
[ 0.647473] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe9304000-0xe93043ff]
[ 0.647538] pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x19f
[ 0.647579] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.647641] pci 0000:00:1e.0: found [8086:244e] class 000604 header type 01
[ 0.647700] pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.647740] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.647802] pci 0000:00:1f.0: found [8086:3a18] class 000601 header type 00
[ 0.647885] pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.647926] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.647993] pci 0000:00:1f.2: found [8086:3a20] class 000101 header type 00
[ 0.648046] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.648088] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.648130] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.648172] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.648214] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
[ 0.648256] pci 0000:00:1f.2: reg 24 io port: [0xf100-0xf10f]
[ 0.648302] pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x19f
[ 0.648343] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.648403] pci 0000:00:1f.3: found [8086:3a30] class 000c05 header type 00
[ 0.648452] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe9306000-0xe93060ff]
[ 0.648502] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.648549] pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x19f
[ 0.648590] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.648642] pci 0000:00:1f.5: found [8086:3a26] class 000101 header type 00
[ 0.648695] pci 0000:00:1f.5: reg 10 io port: [0xe700-0xe707]
[ 0.648738] pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe803]
[ 0.648780] pci 0000:00:1f.5: reg 18 io port: [0xe900-0xe907]
[ 0.648822] pci 0000:00:1f.5: reg 1c io port: [0xea00-0xea03]
[ 0.648865] pci 0000:00:1f.5: reg 20 io port: [0xeb00-0xeb0f]
[ 0.648907] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f]
[ 0.648952] pci 0000:00:1f.5: calling quirk_resource_alignment+0x0/0x19f
[ 0.648993] pci 0000:00:1f.5: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.649050] PCI: Fixups for bus 0000:00
[ 0.649089] pci 0000:00:01.0: scanning behind bridge, config 010100, pass 0
[ 0.649131] PCI: Scanning bus 0000:01
[ 0.649177] pci 0000:01:00.0: found [10de:0402] class 000300 header type 00
[ 0.649227] pci 0000:01:00.0: reg 10 32bit mmio: [0xe6000000-0xe6ffffff]
[ 0.649273] pci 0000:01:00.0: reg 14 64bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.649319] pci 0000:01:00.0: reg 1c 64bit mmio: [0xe4000000-0xe5ffffff]
[ 0.649362] pci 0000:01:00.0: reg 24 io port: [0xb000-0xb07f]
[ 0.649404] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.649447] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.649529] PCI: Fixups for bus 0000:01
[ 0.649568] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.650002] pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe7ffffff]
[ 0.650650] pci 0000:00:01.0: bridge 64bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.650691] PCI: Bus scan for 0000:01 returning with max=01
[ 0.650732] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 0
[ 0.650779] PCI: Scanning bus 0000:02
[ 0.650841] PCI: Fixups for bus 0000:02
[ 0.650884] PCI: Bus scan for 0000:02 returning with max=02
[ 0.650925] pci 0000:00:1c.3: scanning behind bridge, config 030300, pass 0
[ 0.650968] PCI: Scanning bus 0000:03
[ 0.651020] pci 0000:03:00.0: found [197b:2363] class 000101 header type 00
[ 0.651072] pci 0000:03:00.0: calling quirk_jmicron_ata+0x0/0x140
[ 0.651160] pci 0000:03:00.0: reg 24 32bit mmio: [0xe9000000-0xe9001fff]
[ 0.651210] pci 0000:03:00.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.651274] pci 0000:03:00.0: PME# supported from D3hot
[ 0.651316] pci 0000:03:00.0: PME# disabled
[ 0.651378] pci 0000:03:00.1: found [197b:2363] class 000101 header type 00
[ 0.651431] pci 0000:03:00.1: calling quirk_jmicron_ata+0x0/0x140
[ 0.651480] pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007]
[ 0.651525] pci 0000:03:00.1: reg 14 io port: [0xc100-0xc103]
[ 0.651571] pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207]
[ 0.651617] pci 0000:03:00.1: reg 1c io port: [0xc300-0xc303]
[ 0.651662] pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f]
[ 0.651719] pci 0000:03:00.1: calling quirk_resource_alignment+0x0/0x19f
[ 0.651816] PCI: Fixups for bus 0000:03
[ 0.651855] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
[ 0.651896] pci 0000:00:1c.3: bridge 32bit mmio: [0xe9000000-0xe90fffff]
[ 0.651940] PCI: Bus scan for 0000:03 returning with max=03
[ 0.651981] pci 0000:00:1c.4: scanning behind bridge, config 040400, pass 0
[ 0.652024] PCI: Scanning bus 0000:04
[ 0.652076] pci 0000:04:00.0: found [10ec:8168] class 000200 header type 00
[ 0.652135] pci 0000:04:00.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.652190] pci 0000:04:00.0: reg 18 64bit mmio pref:
[0xe9110000-0xe9110fff]
[ 0.652241] pci 0000:04:00.0: reg 20 64bit mmio pref:
[0xe9100000-0xe910ffff]
[ 0.652287] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.652331] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.652400] pci 0000:04:00.0: supports D1 D2
[ 0.652438] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.652481] pci 0000:04:00.0: PME# disabled
[ 0.652559] PCI: Fixups for bus 0000:04
[ 0.652599] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 0.652640] pci 0000:00:1c.4: bridge 32bit mmio: [0xe8000000-0xe8ffffff]
[ 0.652683] pci 0000:00:1c.4: bridge 64bit mmio pref:
[0xe9100000-0xe91fffff]
[ 0.652724] PCI: Bus scan for 0000:04 returning with max=04
[ 0.652765] pci 0000:00:1e.0: scanning behind bridge, config 050500, pass 0
[ 0.652807] PCI: Scanning bus 0000:05
[ 0.652863] pci 0000:05:07.0: found [104c:8024] class 000c00 header type 00
[ 0.652918] pci 0000:05:07.0: reg 10 32bit mmio: [0xe9204000-0xe92047ff]
[ 0.652963] pci 0000:05:07.0: reg 14 32bit mmio: [0xe9200000-0xe9203fff]
[ 0.653026] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.653078] pci 0000:05:07.0: supports D1 D2
[ 0.653117] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.653158] pci 0000:05:07.0: PME# disabled
[ 0.653225] PCI: Fixups for bus 0000:05
[ 0.653263] pci 0000:00:1e.0: transparent bridge
[ 0.653304] pci 0000:00:1e.0: bridge 32bit mmio: [0xe9200000-0xe92fffff]
[ 0.653348] PCI: Bus scan for 0000:05 returning with max=05
[ 0.653388] pci 0000:00:01.0: scanning behind bridge, config 010100, pass 1
[ 0.653431] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 1
[ 0.653474] pci 0000:00:1c.3: scanning behind bridge, config 030300, pass 1
[ 0.653517] pci 0000:00:1c.4: scanning behind bridge, config 040400, pass 1
[ 0.653561] pci 0000:00:1e.0: scanning behind bridge, config 050500, pass 1
[ 0.653604] PCI: Bus scan for 0000:00 returning with max=05
[ 0.653645] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.653784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.653865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.653949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.654028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.666430] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 0.666890] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.667404] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14
15)
[ 0.667863] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 0.668322] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.668835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14
15)
[ 0.669294] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 0.669753] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14
15)
[ 0.670217] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.670277] vgaarb: loaded
[ 0.670386] SCSI subsystem initialized
[ 0.670512] libata version 3.00 loaded.
[ 0.670596] usbcore: registered new interface driver usbfs
[ 0.670647] usbcore: registered new interface driver hub
[ 0.670701] usbcore: registered new device driver usb
[ 0.670822] ACPI: WMI: Mapper loaded
[ 0.670860] PCI: Using ACPI for IRQ routing
[ 0.671016] Bluetooth: Core ver 2.15
[ 0.671072] NET: Registered protocol family 31
[ 0.671110] Bluetooth: HCI device and connection manager initialized
[ 0.671151] Bluetooth: HCI socket layer initialized
[ 0.671190] NetLabel: Initializing
[ 0.671227] NetLabel: domain hash size = 128
[ 0.671265] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.671311] NetLabel: unlabeled traffic allowed by default
[ 0.671364] HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
[ 0.671409] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.671582] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.690004] Switching to clocksource tsc
[ 0.691273] pnp: PnP ACPI init
[ 0.691317] ACPI: bus type pnp registered
[ 0.693002] pnp: PnP ACPI: found 12 devices
[ 0.693041] ACPI: ACPI bus type pnp unregistered
[ 0.693084] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.693125] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.693165] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.693206] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.693246] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.693287] system 00:01: ioport range 0x4c0-0x4ff could not be reserved
[ 0.693330] system 00:08: ioport range 0x400-0x4bf has been reserved
[ 0.693373] system 00:09: iomem range 0xe0000000-0xe3ffffff has been
reserved
[ 0.693416] system 00:0a: iomem range 0xccc00-0xcffff has been reserved
[ 0.693457] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.693498] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.693539] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[ 0.693580] system 00:0a: iomem range 0xcfee0000-0xcfefffff could not be
reserved
[ 0.693629] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.693669] system 00:0a: iomem range 0x100000-0xcfedffff could not be
reserved
[ 0.693718] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.693767] system 00:0a: iomem range 0xfed10000-0xfed1dfff has been
reserved
[ 0.693808] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been
reserved
[ 0.693849] system 00:0a: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.693890] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been
reserved
[ 0.693932] system 00:0a: iomem range 0xfff00000-0xffffffff has been
reserved
[ 0.693973] system 00:0a: iomem range 0xe0000-0xeffff has been reserved
[ 0.698648] pci 0000:01:00.0: BAR 6: got res [0xe7000000-0xe701ffff] bus
[0xe7000000-0xe701ffff] flags 0x27200
[ 0.698699] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.698740] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.698780] pci 0000:00:01.0: MEM window: 0xe4000000-0xe7ffffff
[ 0.698821] pci 0000:00:01.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.698870] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.698911] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.698952] pci 0000:00:1c.0: MEM window: 0xe9400000-0xe95fffff
[ 0.698993] pci 0000:00:1c.0: PREFETCH window:
0x000000e9600000-0x000000e97fffff
[ 0.699045] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.699085] pci 0000:00:1c.3: IO window: 0xc000-0xcfff
[ 0.699126] pci 0000:00:1c.3: MEM window: 0xe9000000-0xe90fffff
[ 0.699168] pci 0000:00:1c.3: PREFETCH window:
0x000000e9800000-0x000000e99fffff
[ 0.699220] pci 0000:04:00.0: BAR 6: got res [0xe9120000-0xe912ffff] bus
[0xe9120000-0xe912ffff] flags 0x27200
[ 0.699270] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
[ 0.699311] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.699352] pci 0000:00:1c.4: MEM window: 0xe8000000-0xe8ffffff
[ 0.699393] pci 0000:00:1c.4: PREFETCH window:
0x000000e9100000-0x000000e91fffff
[ 0.699444] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.699498] pci 0000:00:1e.0: IO window: disabled
[ 0.699539] pci 0000:00:1e.0: MEM window: 0xe9200000-0xe92fffff
[ 0.699581] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.699625] alloc irq_desc for 16 on node -1
[ 0.699663] alloc kstat_irqs on node -1
[ 0.699703] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.699751] pci 0000:00:01.0: setting latency timer to 64
[ 0.699795] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.699836] pci 0000:00:1c.0: setting latency timer to 64
[ 0.699879] alloc irq_desc for 19 on node -1
[ 0.699918] alloc kstat_irqs on node -1
[ 0.699956] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.699998] pci 0000:00:1c.3: setting latency timer to 64
[ 0.700041] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.700083] pci 0000:00:1c.4: setting latency timer to 64
[ 0.700125] pci 0000:00:1e.0: setting latency timer to 64
[ 0.700166] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.700205] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.700246] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.700285] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe7ffffff]
[ 0.700326] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.700366] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.701002] pci_bus 0000:02: resource 1 mem: [0xe9400000-0xe95fffff]
[ 0.701042] pci_bus 0000:02: resource 2 pref mem [0xe9600000-0xe97fffff]
[ 0.701083] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.701122] pci_bus 0000:03: resource 1 mem: [0xe9000000-0xe90fffff]
[ 0.701163] pci_bus 0000:03: resource 2 pref mem [0xe9800000-0xe99fffff]
[ 0.701203] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.701243] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe8ffffff]
[ 0.701283] pci_bus 0000:04: resource 2 pref mem [0xe9100000-0xe91fffff]
[ 0.701324] pci_bus 0000:05: resource 1 mem: [0xe9200000-0xe92fffff]
[ 0.701364] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.701403] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.701462] NET: Registered protocol family 2
[ 0.701670] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.702574] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[ 0.705993] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.706603] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.706644] TCP reno registered
[ 0.706775] NET: Registered protocol family 1
[ 0.706834] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.706876] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.706917] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.706959] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xbd
[ 0.707000] pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.707041] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.707081] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.707122] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xbd
[ 0.707163] pci 0000:00:1a.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.707204] pci 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.707244] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.707297] pci 0000:00:1a.0: calling pci_fixup_video+0x0/0xbd
[ 0.707338] pci 0000:00:1a.1: calling quirk_e100_interrupt+0x0/0x192
[ 0.707378] pci 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x30
[ 0.707419] pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x580
[ 0.707470] pci 0000:00:1a.1: calling pci_fixup_video+0x0/0xbd
[ 0.707511] pci 0000:00:1a.2: calling quirk_e100_interrupt+0x0/0x192
[ 0.707552] pci 0000:00:1a.2: calling quirk_cardbus_legacy+0x0/0x30
[ 0.707592] pci 0000:00:1a.2: calling quirk_usb_early_handoff+0x0/0x580
[ 0.707644] pci 0000:00:1a.2: calling pci_fixup_video+0x0/0xbd
[ 0.707685] pci 0000:00:1a.7: calling quirk_e100_interrupt+0x0/0x192
[ 0.707725] pci 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x30
[ 0.707766] pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x580
[ 0.707826] pci 0000:00:1a.7: calling pci_fixup_video+0x0/0xbd
[ 0.707867] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.707908] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.707948] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.707989] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xbd
[ 0.708030] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.708070] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.708111] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.708151] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xbd
[ 0.708192] pci 0000:00:1c.3: calling quirk_e100_interrupt+0x0/0x192
[ 0.708232] pci 0000:00:1c.3: calling quirk_cardbus_legacy+0x0/0x30
[ 0.708273] pci 0000:00:1c.3: calling quirk_usb_early_handoff+0x0/0x580
[ 0.708314] pci 0000:00:1c.3: calling pci_fixup_video+0x0/0xbd
[ 0.708354] pci 0000:00:1c.4: calling quirk_e100_interrupt+0x0/0x192
[ 0.708395] pci 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x30
[ 0.708435] pci 0000:00:1c.4: calling quirk_usb_early_handoff+0x0/0x580
[ 0.708476] pci 0000:00:1c.4: calling pci_fixup_video+0x0/0xbd
[ 0.708517] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.708558] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.708598] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.708649] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xbd
[ 0.708690] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x192
[ 0.708731] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x30
[ 0.708771] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x580
[ 0.708822] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xbd
[ 0.708864] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x192
[ 0.708904] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x30
[ 0.708944] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x580
[ 0.708996] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xbd
[ 0.709037] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x192
[ 0.709077] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x30
[ 0.709118] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x580
[ 0.709183] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xbd
[ 0.709224] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.709265] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.709306] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.709346] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xbd
[ 0.709387] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.709428] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.709468] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.709536] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xbd
[ 0.709577] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x192
[ 0.709618] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x30
[ 0.709658] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x580
[ 0.709699] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xbd
[ 0.709750] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x192
[ 0.709791] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x30
[ 0.709831] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x580
[ 0.709872] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xbd
[ 0.709913] pci 0000:00:1f.5: calling quirk_e100_interrupt+0x0/0x192
[ 0.709954] pci 0000:00:1f.5: calling quirk_cardbus_legacy+0x0/0x30
[ 0.709994] pci 0000:00:1f.5: calling quirk_usb_early_handoff+0x0/0x580
[ 0.710035] pci 0000:00:1f.5: calling pci_fixup_video+0x0/0xbd
[ 0.710075] pci 0000:01:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 0.710122] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.710163] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.710203] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xbd
[ 0.710244] pci 0000:01:00.0: Boot video device
[ 0.710284] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.710324] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.710365] pci 0000:03:00.0: calling pci_fixup_video+0x0/0xbd
[ 0.710405] pci 0000:03:00.1: calling quirk_cardbus_legacy+0x0/0x30
[ 0.710446] pci 0000:03:00.1: calling quirk_usb_early_handoff+0x0/0x580
[ 0.710486] pci 0000:03:00.1: calling pci_fixup_video+0x0/0xbd
[ 0.710527] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.710567] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.710608] pci 0000:04:00.0: calling pci_fixup_video+0x0/0xbd
[ 0.710649] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.710689] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.710730] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xbd
[ 0.710809] Trying to unpack rootfs image as initramfs...
[ 1.812734] Freeing initrd memory: 65134k freed
[ 1.843111] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.843156] Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
[ 1.843205] software IO TLB at phys 0x20000000 - 0x24000000
[ 1.843519] Scanning for low memory corruption every 60 seconds
[ 1.843700] audit: initializing netlink socket (disabled)
[ 1.843753] type=2000 audit(1260220944.840:1): initialized
[ 1.854067] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.855065] VFS: Disk quotas dquot_6.5.2
[ 1.855139] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.855555] fuse init (API version 7.13)
[ 1.855645] msgmni has been set to 11957
[ 1.855869] alg: No test for stdrng (krng)
[ 1.855914] io scheduler noop registered
[ 1.855952] io scheduler anticipatory registered
[ 1.855990] io scheduler deadline registered
[ 1.856051] io scheduler cfq registered (default)
[ 1.856173] alloc irq_desc for 24 on node -1
[ 1.856212] alloc kstat_irqs on node -1
[ 1.856256] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.856298] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.856405] alloc irq_desc for 25 on node -1
[ 1.856443] alloc kstat_irqs on node -1
[ 1.856485] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 1.856528] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.856649] alloc irq_desc for 26 on node -1
[ 1.856687] alloc kstat_irqs on node -1
[ 1.856729] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 1.856772] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.856893] alloc irq_desc for 27 on node -1
[ 1.856931] alloc kstat_irqs on node -1
[ 1.856973] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
[ 1.857016] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.857114] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.857219] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.857366] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.857417] ACPI: Power Button [PWRB]
[ 1.857496] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.857544] ACPI: Power Button [PWRF]
[ 1.857951] ACPI: SSDT 00000000cfee7ad0 0022A (v01 PmRef Cpu0Ist 00003000
INTL 20040311)
[ 1.858207] Marking TSC unstable due to TSC halts in idle
[ 1.858274] processor LNXCPU:00: registered as cooling_device0
[ 1.858490] ACPI: SSDT 00000000cfee7f90 00152 (v01 PmRef Cpu1Ist 00003000
INTL 20040311)
[ 1.858812] ACPI Error (psparse-0537): Method parse/execution failed
[\_PR_.CPU1._PDC] (Node ffff8801a9048f40), AE_ALREADY_EXISTS
[ 1.858946] ACPI: Marking method _PDC as Serialized because of
AE_ALREADY_EXISTS error
[ 1.859099] Switching to clocksource hpet
[ 1.859287] processor LNXCPU:01: registered as cooling_device1
[ 1.859530] ACPI: SSDT 00000000cfee80f0 00152 (v01 PmRef Cpu2Ist 00003000
INTL 20040311)
[ 1.859851] ACPI Error (psparse-0537): Method parse/execution failed
[\_PR_.CPU2._PDC] (Node ffff8801a9048fc0), AE_ALREADY_EXISTS
[ 1.859991] ACPI: Marking method _PDC as Serialized because of
AE_ALREADY_EXISTS error
[ 1.860227] processor LNXCPU:02: registered as cooling_device2
[ 1.860434] ACPI: SSDT 00000000cfee8250 00152 (v01 PmRef Cpu3Ist 00003000
INTL 20040311)
[ 1.860756] ACPI Error (psparse-0537): Method parse/execution failed
[\_PR_.CPU3._PDC] (Node ffff8801a904f040), AE_ALREADY_EXISTS
[ 1.860890] ACPI: Marking method _PDC as Serialized because of
AE_ALREADY_EXISTS error
[ 1.861733] processor LNXCPU:03: registered as cooling_device3
[ 1.864013] Linux agpgart interface v0.103
[ 1.864057] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.864930] brd: module loaded
[ 1.865271] loop: module loaded
[ 1.865349] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 1.865455] ahci 0000:03:00.0: version 3.0
[ 1.865504] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.883786] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3
impl SATA mode
[ 1.883838] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum
part
[ 1.883888] ahci 0000:03:00.0: setting latency timer to 64
[ 1.884054] scsi0 : ahci
[ 1.884139] scsi1 : ahci
[ 1.884229] ata1: SATA max UDMA/133 abar m8192@0xe9000000 port 0xe9000100
irq 19
[ 1.884279] ata2: SATA max UDMA/133 abar m8192@0xe9000000 port 0xe9000180
irq 19
[ 2.230026] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.600025] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.620049] ata_piix 0000:00:1f.2: version 2.13
[ 2.620096] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 2.620145] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.620342] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.620427] scsi2 : ata_piix
[ 2.620500] scsi3 : ata_piix
[ 2.621072] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 2.621115] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 3.480056] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.480113] ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.546220] ata3.00: HPA detected: current 1953523055, native 1953525168
[ 3.546266] ata3.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 3.546312] ata3.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.546507] ata3.01: ATA-7: ST3300831AS, 3.02, max UDMA/133
[ 3.546549] ata3.01: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.606228] ata3.00: configured for UDMA/133
[ 3.620303] ata3.01: configured for UDMA/133
[ 3.620432] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC34
PQ: 0 ANSI: 5
[ 3.620540] sd 2:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00
TB/931 GiB)
[ 3.620617] sd 2:0:0:0: [sda] Write Protect is off
[ 3.620656] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.620710] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.620842] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 3.709735] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.709803] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.709883] scsi 2:0:1:0: Direct-Access ATA ST3300831AS 3.02
PQ: 0 ANSI: 5
[ 3.709983] sd 2:0:1:0: [sdb] 586072368 512-byte logical blocks: (300
GB/279 GiB)
[ 3.710062] sd 2:0:1:0: [sdb] Write Protect is off
[ 3.710101] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.710154] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.710276] sdb: sdb1
[ 3.733490] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 3.733553] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 4.590055] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.590112] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.630289] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
[ 4.630332] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.630394] ata4.01: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100
[ 4.650303] ata4.00: configured for UDMA/133
[ 4.690193] ata4.01: configured for UDMA/100
[ 4.690568] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10
PQ: 0 ANSI: 5
[ 4.690686] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 4.690761] sd 3:0:0:0: [sdc] Write Protect is off
[ 4.690801] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.690853] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.690972] sdc: sdc2 < sdc5 sdc6 sdc7 > sdc3
[ 4.771287] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 4.771349] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 4.772662] scsi 3:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01
PQ: 0 ANSI: 5
[ 4.776309] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 4.776361] Uniform CD-ROM driver Revision: 3.20
[ 4.776469] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 4.776532] sr 3:0:1:0: Attached scsi generic sg3 type 5
[ 4.776585] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 4.776628] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.776823] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.776889] scsi4 : ata_piix
[ 4.776959] scsi5 : ata_piix
[ 4.777364] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq
19
[ 4.777407] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq
19
[ 5.130659] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.490657] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.490918] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 5.490961] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) ->
IRQ 16
[ 5.491026] pata_jmicron 0000:03:00.1: enabling bus mastering
[ 5.491069] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 5.491147] scsi6 : pata_jmicron
[ 5.491217] scsi7 : pata_jmicron
[ 5.491729] ata7: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq
16
[ 5.491771] ata8: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq
16
[ 5.821774] Fixed MDIO Bus: probed
[ 5.821834] PPP generic driver version 2.4.2
[ 5.821914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.821965] alloc irq_desc for 18 on node -1
[ 5.822004] alloc kstat_irqs on node -1
[ 5.822044] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 5.822090] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5.822131] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.822198] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 5.826136] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 5.826183] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe9305000
[ 5.850012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.850124] usb usb1: configuration #1 chosen from 1 choice
[ 5.850186] hub 1-0:1.0: USB hub found
[ 5.850227] hub 1-0:1.0: 6 ports detected
[ 5.850306] alloc irq_desc for 23 on node -1
[ 5.850344] alloc kstat_irqs on node -1
[ 5.850384] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 5.850430] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.850470] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.850533] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 5.854488] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.854536] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe9304000
[ 5.870012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.870103] usb usb2: configuration #1 chosen from 1 choice
[ 5.870173] hub 2-0:1.0: USB hub found
[ 5.870214] hub 2-0:1.0: 6 ports detected
[ 5.870290] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.870339] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.870410] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 5.870453] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.870493] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.870554] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 5.870620] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[ 5.870708] usb usb3: configuration #1 chosen from 1 choice
[ 5.870765] hub 3-0:1.0: USB hub found
[ 5.870806] hub 3-0:1.0: 2 ports detected
[ 5.870871] alloc irq_desc for 21 on node -1
[ 5.870910] alloc kstat_irqs on node -1
[ 5.870949] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 5.870992] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5.871033] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.871092] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 5.871163] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
[ 5.871249] usb usb4: configuration #1 chosen from 1 choice
[ 5.871306] hub 4-0:1.0: USB hub found
[ 5.871347] hub 4-0:1.0: 2 ports detected
[ 5.871413] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 5.871456] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 5.871496] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 5.871552] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 5
[ 5.871617] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[ 5.871706] usb usb5: configuration #1 chosen from 1 choice
[ 5.871760] hub 5-0:1.0: USB hub found
[ 5.871800] hub 5-0:1.0: 2 ports detected
[ 5.871867] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 5.871911] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.871951] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.872007] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 6
[ 5.872072] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 5.872159] usb usb6: configuration #1 chosen from 1 choice
[ 5.872214] hub 6-0:1.0: USB hub found
[ 5.872256] hub 6-0:1.0: 2 ports detected
[ 5.872323] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 5.872367] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.872407] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.872470] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 7
[ 5.872535] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 5.872623] usb usb7: configuration #1 chosen from 1 choice
[ 5.873275] hub 7-0:1.0: USB hub found
[ 5.873317] hub 7-0:1.0: 2 ports detected
[ 5.873385] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 5.873428] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.873468] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.873524] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 8
[ 5.873590] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 5.873678] usb usb8: configuration #1 chosen from 1 choice
[ 5.873732] hub 8-0:1.0: USB hub found
[ 5.873772] hub 8-0:1.0: 2 ports detected
[ 5.873869] PNP: No PS/2 controller found. Probing ports directly.
[ 5.874253] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.874297] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.874418] mice: PS/2 mouse device common for all mice
[ 5.874499] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 5.874565] rtc_cmos 00:04: RTC can wake from S4
[ 5.874623] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 5.874681] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 5.874797] device-mapper: uevent: version 1.0.3
[ 5.874884] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
[ 5.875013] device-mapper: multipath: version 1.1.0 loaded
[ 5.875053] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.875353] cpuidle: using governor ladder
[ 5.875544] cpuidle: using governor menu
[ 5.875821] TCP cubic registered
[ 5.875954] NET: Registered protocol family 10
[ 5.876293] lo: Disabled Privacy Extensions
[ 5.876518] NET: Registered protocol family 17
[ 5.876567] Bluetooth: L2CAP ver 2.14
[ 5.876605] Bluetooth: L2CAP socket layer initialized
[ 5.876644] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.876682] Bluetooth: SCO socket layer initialized
[ 5.876736] Bluetooth: RFCOMM TTY layer initialized
[ 5.876775] Bluetooth: RFCOMM socket layer initialized
[ 5.876814] Bluetooth: RFCOMM ver 1.11
[ 5.882144] PM: Resume from disk failed.
[ 5.882194] registered taskstats version 1
[ 5.882564] Magic number: 5:613:398
[ 5.882699] rtc_cmos 00:04: setting system clock to 2009-12-07 21:22:29 UTC
(1260220949)
[ 5.882755] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.882794] EDD information not available.
[ 5.882873] Freeing unused kernel memory: 652k freed
[ 5.883017] Write protecting the kernel read-only data: 10240k
[ 5.883246] Freeing unused kernel memory: 808k freed
[ 5.883550] Freeing unused kernel memory: 1764k freed
[ 5.976979] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.977040] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.977087] r8169 0000:04:00.0: enabling Mem-Wr-Inval
[ 5.977167] r8169 0000:04:00.0: setting latency timer to 64
[ 5.977247] alloc irq_desc for 28 on node -1
[ 5.977291] alloc kstat_irqs on node -1
[ 5.977341] r8169 0000:04:00.0: irq 28 for MSI/MSI-X
[ 5.977778] eth0: RTL8168c/8111c at 0xffffc90000c5c000, 00:1f:d0:9d:27:af,
XID 1c4000c0 IRQ 28
[ 5.980983] Floppy drive(s): fd0 is 1.44M
[ 6.005636] ohci1394 0000:05:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 6.006235] FDC 0 is a post-1991 82077
[ 6.063833] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23]
MMIO=[e9204000-e92047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.458065] kjournald starting. Commit interval 5 seconds
[ 6.458075] EXT3-fs: mounted filesystem with writeback data mode.
[ 6.810046] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 7.106807] usb 3-1: configuration #1 chosen from 1 choice
[ 7.390029] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 7.390128] ieee1394: Host added: ID:BUS[0-00:1023] GUID[007c2d6400001fd0]
[ 7.562823] usb 5-1: configuration #1 chosen from 1 choice
[ 7.840038] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 8.019777] usb 5-2: configuration #1 chosen from 1 choice
[ 8.300039] usb 8-1: new full speed USB device using uhci_hcd and address 2
[ 8.476735] usb 8-1: configuration #1 chosen from 1 choice
[ 8.478696] hub 8-1:1.0: USB hub found
[ 8.480677] hub 8-1:1.0: 4 ports detected
[ 8.760029] usb 8-2: new low speed USB device using uhci_hcd and address 3
[ 8.938728] usb 8-2: configuration #1 chosen from 1 choice
[ 9.021674] usb 8-1.4: new low speed USB device using uhci_hcd and address
4
[ 9.163725] usb 8-1.4: configuration #1 chosen from 1 choice
[ 11.782064] udev: starting version 147
[ 12.299406] usbcore: registered new interface driver hiddev
[ 12.316947] input: Logitech USB RECEIVER as
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 12.317025] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-2/input0
[ 12.330897] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.4/8-1.4:1.0/input/input4
[ 12.330934] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10
Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-1.4/input0
[ 12.361985] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.4/8-1.4:1.1/input/input5
[ 12.362100] generic-usb 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10
Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-1.4/input1
[ 12.362124] usbcore: registered new interface driver usbhid
[ 12.362148] usbhid: v2.6:USB HID core driver
[ 12.529906] lp: driver loaded but no devices found
[ 12.602382] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.283068] nvidia: module license 'NVIDIA' taints kernel.
[ 13.283071] Disabling lock debugging due to kernel taint
[ 13.644907] alloc irq_desc for 22 on node -1
[ 13.644910] alloc kstat_irqs on node -1
[ 13.644918] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 13.645025] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.740059] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.740065] nvidia 0000:01:00.0: setting latency timer to 64
[ 13.740190] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri
Aug 14 17:35:21 PDT 2009
[ 13.798095] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 13.879985] usbcore: registered new interface driver snd-usb-audio
[ 14.126815] Adding 6562544k swap on /dev/mapper/cryptoswap. Priority:-1
extents:1 across:6562544k
[ 15.530195] EXT3 FS on sda8, internal journal
[ 15.906396] r8169: eth0: link up
[ 15.906398] r8169: eth0: link up
[ 16.308462] kjournald starting. Commit interval 5 seconds
[ 16.308468] EXT3-fs: mounted filesystem with writeback data mode.
[ 16.347904] kjournald starting. Commit interval 5 seconds
[ 16.348154] EXT3 FS on sda6, internal journal
[ 16.348156] EXT3-fs: mounted filesystem with writeback data mode.
[ 16.522213] kjournald starting. Commit interval 5 seconds
[ 16.522219] EXT3-fs: mounted filesystem with writeback data mode.
[ 16.542184] kjournald starting. Commit interval 5 seconds
[ 16.542520] EXT3 FS on sdc6, internal journal
[ 16.542522] EXT3-fs: mounted filesystem with writeback data mode.
[ 17.720700] RPC: Registered udp transport module.
[ 17.720703] RPC: Registered tcp transport module.
[ 17.720704] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.891520] ppdev: user-space parallel port driver
[ 18.340322] svc: failed to register lockdv1 RPC service (errno 97).
[ 25.734557] kjournald starting. Commit interval 5 seconds
[ 25.734568] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 25.750204] EXT3 FS on dm-1, internal journal
[ 25.750209] EXT3-fs: mounted filesystem with writeback data mode.
[ 26.792535] eth0: no IPv6 routers present
[ 28.008085] CPUFREQ: Per core ondemand sysfs interface is deprecated -
up_threshold
-----------------------------------------------------------------------------


Volker


\
 
 \ /
  Last update: 2009-12-07 21:39    [W:0.090 / U:5.748 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site