lkml.org 
[lkml]   [2009]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[PATCH] Staging: IIO: add selection of IIO_SW_RING to LIS3L02DQ as needed

    Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
    Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
    ---

    Thanks to Randy for the report. Sorry for the slow response.
    I've been meaning to carefully check for any remaining cases like
    this.
    Here I've kept the selection of IIO_SW_RING separate from
    IIO_TRIGGER as it will go away fairly shortly when the ring buffer
    type becomes configurable on a per device basis, whereas the
    IIO_TRIGGER select will remain. Whether to retain the option to
    remove the support for ring buffers entirely is one for after that
    support is in place.

    Touch wood I think this is the last one, but I'll try a selection of
    unusual combinations now and post others as replies to this email.

    drivers/staging/iio/accel/Kconfig | 1 +
    1 files changed, 1 insertions(+), 0 deletions(-)

    diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig
    index 4044663..3d3c333 100644
    --- a/drivers/staging/iio/accel/Kconfig
    +++ b/drivers/staging/iio/accel/Kconfig
    @@ -14,6 +14,7 @@ config LIS3L02DQ
    tristate "ST Microelectronics LIS3L02DQ Accelerometer Driver"
    depends on SPI
    select IIO_TRIGGER if IIO_RING_BUFFER
    + select IIO_SW_RING if IIO_RING_BUFFER
    help
    Say yes here to build SPI support for the ST microelectronics
    accelerometer. The driver supplies direct access via sysfs files
    --
    1.6.4.4

    \
     
     \ /
      Last update: 2009-12-07 16:21    [W:0.030 / U:93.356 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site