lkml.org 
[lkml]   [2009]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[066/119] V4L/DVB (12501): gspca - sonixj: Do the ov7660 sensor work again.
2.6.31-stable review patch.  If anyone has any objections, please let us know.

------------------
From: Jean-Francois Moine <moinejf@free.fr>

commit 47f7f6fb7949b6546baf4b6f26bf0ca075d12759 upstream.

- bad sensor power
- bad edge gain/threshold
- set back the auto gain
- light frequency filter inverted

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/media/video/gspca/sonixj.c | 23 +++++++----------------
1 file changed, 7 insertions(+), 16 deletions(-)

--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -733,7 +733,7 @@ static const u8 ov7660_sensor_init[][8]
/* COM 1 BAVE GEAVE AECHH */
{0xb1, 0x21, 0x08, 0x83, 0x01, 0x00, 0x00, 0x10}, /* RAVE COM2 */
{0xd1, 0x21, 0x0c, 0x00, 0x08, 0x04, 0x4f, 0x10}, /* COM 3 4 5 6 */
- {0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xf8, 0x10},
+ {0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10},
/* AECH CLKRC COM7 COM8 */
{0xc1, 0x21, 0x14, 0x2c, 0x00, 0x02, 0x00, 0x10}, /* COM9 COM10 */
{0xd1, 0x21, 0x17, 0x10, 0x60, 0x02, 0x7b, 0x10},
@@ -783,7 +783,7 @@ static const u8 ov7660_sensor_init[][8]
{0xc1, 0x21, 0x88, 0xaf, 0xc7, 0xdf, 0x00, 0x10}, /* gamma curve */
{0xc1, 0x21, 0x8b, 0x99, 0x99, 0xcf, 0x00, 0x10}, /* reserved */
{0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10}, /* DM_LNL/H */
- {0xb1, 0x21, 0xa1, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0xa1, 0x00, 0x00, 0x00, 0x00, 0x10},
/****** (some exchanges in the win trace) ******/
{0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, /* MVFP */
/* bits[3..0]reserved */
@@ -1145,11 +1145,6 @@ static int configure_gpio(struct gspca_d
reg_w1(gspca_dev, 0x01, 0x42);
break;
case SENSOR_OV7660:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
case SENSOR_SP80708:
reg_w1(gspca_dev, 0x01, 0x63);
reg_w1(gspca_dev, 0x17, 0x20);
@@ -1624,6 +1619,8 @@ static void setvflip(struct sd *sd)

static void setinfrared(struct sd *sd)
{
+ if (sd->gspca_dev.ctrl_dis & (1 << INFRARED_IDX))
+ return;
/*fixme: different sequence for StarCam Clip and StarCam 370i */
/* Clip */
i2c_w1(&sd->gspca_dev, 0x02, /* gpio */
@@ -1639,10 +1636,10 @@ static void setfreq(struct gspca_dev *gs
if (sd->sensor == SENSOR_OV7660) {
u8 com8;

- com8 = 0xf8; /* no auto gain/wb/expo */
+ com8 = 0xdf; /* auto gain/wb/expo */
switch (sd->freq) {
case 0: /* Banding filter disabled */
- i2c_w1(gspca_dev, 0x13, com8 & 0xdf);
+ i2c_w1(gspca_dev, 0x13, com8 | 0x20);
break;
case 1: /* 50 hz */
i2c_w1(gspca_dev, 0x13, com8);
@@ -1799,12 +1796,6 @@ static int sd_start(struct gspca_dev *gs
reg_w1(gspca_dev, 0x99, 0x60);
break;
case SENSOR_OV7660:
- reg_w1(gspca_dev, 0x9a, 0x05);
- if (sd->bridge == BRIDGE_SN9C105)
- reg_w1(gspca_dev, 0x99, 0xff);
- else
- reg_w1(gspca_dev, 0x99, 0x5b);
- break;
case SENSOR_SP80708:
reg_w1(gspca_dev, 0x9a, 0x05);
reg_w1(gspca_dev, 0x99, 0x59);
@@ -2328,7 +2319,7 @@ static const __devinitdata struct usb_de
{USB_DEVICE(0x0c45, 0x607c), BSI(SN9C102P, HV7131R, 0x11)},
/* {USB_DEVICE(0x0c45, 0x607e), BSI(SN9C102P, OV7630, 0x??)}, */
{USB_DEVICE(0x0c45, 0x60c0), BSI(SN9C105, MI0360, 0x5d)},
-/* {USB_DEVICE(0x0c45, 0x60c8), BSI(SN9C105, OM6801, 0x??)}, */
+/* {USB_DEVICE(0x0c45, 0x60c8), BSI(SN9C105, OM6802, 0x??)}, */
/* {USB_DEVICE(0x0c45, 0x60cc), BSI(SN9C105, HV7131GP, 0x??)}, */
{USB_DEVICE(0x0c45, 0x60ec), BSI(SN9C105, MO4000, 0x21)},
/* {USB_DEVICE(0x0c45, 0x60ef), BSI(SN9C105, ICM105C, 0x??)}, */



\
 
 \ /
  Last update: 2009-12-07 01:29    [W:0.242 / U:0.696 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site