lkml.org 
[lkml]   [2009]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[082/119] V4L/DVB (13313): saa7134: add support for FORCE_TS_VALID mode for mpeg ts input
2.6.31-stable review patch.  If anyone has any objections, please let us know.

------------------
From: Michael Krufky <mkrufky@kernellabs.com>

commit 4007a672abd88091e3cced158ec491d41c0c454c upstream.

When FORCE_TS_VALID mode is enabled, the saa713x will accept MPEG TS input
without requiring TS_VALID set high. This is required for some new boards
to function properly, due to the hardware design implementation.

The configuration is toggled within the board setup configuration. Boards
that do not have this bit set will function as before with no change.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/media/video/saa7134/saa7134-ts.c | 6 ++++--
drivers/media/video/saa7134/saa7134.h | 1 +
2 files changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -355,6 +355,7 @@ struct saa7134_board {
enum saa7134_mpeg_type mpeg;
enum saa7134_mpeg_ts_type ts_type;
unsigned int vid_port_opts;
+ unsigned int ts_force_val:1;
};

#define card_has_radio(dev) (NULL != saa7134_boards[dev->board].radio.name)
--- a/drivers/media/video/saa7134/saa7134-ts.c
+++ b/drivers/media/video/saa7134/saa7134-ts.c
@@ -262,11 +262,13 @@ int saa7134_ts_start(struct saa7134_dev
switch (saa7134_boards[dev->board].ts_type) {
case SAA7134_MPEG_TS_PARALLEL:
saa_writeb(SAA7134_TS_SERIAL0, 0x40);
- saa_writeb(SAA7134_TS_PARALLEL, 0xec);
+ saa_writeb(SAA7134_TS_PARALLEL, 0xec |
+ (saa7134_boards[dev->board].ts_force_val << 4));
break;
case SAA7134_MPEG_TS_SERIAL:
saa_writeb(SAA7134_TS_SERIAL0, 0xd8);
- saa_writeb(SAA7134_TS_PARALLEL, 0x6c);
+ saa_writeb(SAA7134_TS_PARALLEL, 0x6c |
+ (saa7134_boards[dev->board].ts_force_val << 4));
saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc);
saa_writeb(SAA7134_TS_SERIAL1, 0x02);
break;



\
 
 \ /
  Last update: 2009-12-07 01:25    [W:0.269 / U:25.260 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site