lkml.org 
[lkml]   [2009]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: sky2 panic in 2.6.32.1 under load
Date
On Thursday 24 December 2009 05:42:08 pm Michael Breuer wrote:
> On 12/24/2009 5:21 PM, Stephen Hemminger wrote:
> > On Thu, 24 Dec 2009 11:28:57 -0500
> >
> > Daniel Hazelton<dhazelton@enter.net> wrote:
> >> On Thursday 24 December 2009 11:03:56 am Berck Nash wrote:
> >>> Andrew Morton wrote:
> >>>> On Mon, 21 Dec 2009 16:52:10 -0700 "Berck E. Nash"<flyboy@gmail.com>
> >>
> >> wrote:
> >>>>> Since 2.6.32, I've been getting kernel panics under heavy network
> >>>>> load (bittorrent usage).
> >>>>
> >>>> Let's cc the right list and developer.
> >>>>
> >>>> This is a 2.6.31->2.6.32 regression?
> >>>
> >>> I believe so. Since it's intermittent and difficult to reproduce, it's
> >>> possible (but unlikely) that I simply never triggered it under 2.6.31.
> >>
> >> This is far from new. I have seen this under 2.6.27 when at least one
> >> botnet has been pointed at a server of mine and told to gain access. It
> >> has happened four times in the last six to eight months - and I have no
> >> easy way to capture the logs. But the oops that was posted looks very,
> >> very similar to what I've seen.
> >>
> >> It's always an allocation error in the transmit path that leads to the
> >> panic. Because this is a production machine that I do not have a way to
> >> take down and do testing with I've not reported the problem before.
> >
> > Even though I wrote/maintain the sky driver, I don't work for SysKonnect,
> > and only have access to a limited set of information:
> > the technical manuals (under NDA), and the vendor sk98lin driver. The
> > sky2 driver imitates the receiver timeout of the sk98lin driver; other
> > people have told me that the FIFO hardware implementation is buggy and
> > when it gets full, it gets stuck. Probably the equivalent of a software
> > FIFO where the developer forgets to reserve a slot so that head == tail
> > can mean both empty and full!
> >
> > The workaround with a timer is prone to errors when traffic keeps going,
> > also the vendor doesn't really provide clear instructions on how to
> > unlock it. I do not have access to the hardware errata describing the
> > problem. If I did a more minimal solution would be possible.
> >
> > The easiest advice is avoid sky2 chips with FIFO for any heavy traffic,
> > the next advice is make sure receive flow control is enabled so that
> > receiver doesn't get overrun. If tx timeouts are an issue use a rate
> > limiter like TBF. Do not use the chip with 10 or 100 mbit since the
> > transmitter is more prone to get overrun.
>
> For this particular issue, I'm only seeing problems when running at 1000
> mbit. 100 appears stable.
>

Not here - it is crashing under 100. I do have a different NIC available for
that system and will likely switch to it when I have a chance to work on
upgrading the install there. The reason I am using the Sky NIC on that system
is because there are, apparently, two different NIC's on the board itself - an
nForce one and a Sky2 one...

DRH


\
 
 \ /
  Last update: 2009-12-25 01:09    [W:0.752 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site