lkml.org 
[lkml]   [2009]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] ioat3: fix p-disabled q-continuation
Date
When continuing a pq calculation the driver needs 3 extra sources.  The
driver can perform a 3 source calculation with a single descriptor, but
needs an extended descriptor to process up to 8 sources in one
operation. However, in the p-disabled case only one extra source is
needed. When continuing a p-disabled operation there are occasions
(i.e. 0 < src_cnt % 8 < 3) where the tail operation does not need an
extended descriptor. Properly account for this fact otherwise invalid
'dmacount' values will be written to hardware usually causing the
channel to halt with 'invalid descriptor' errors.

Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---

drivers/dma/ioat/dma_v3.c | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c
index 42f6f10..e58ecb2 100644
--- a/drivers/dma/ioat/dma_v3.c
+++ b/drivers/dma/ioat/dma_v3.c
@@ -650,9 +650,11 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result,

num_descs = ioat2_xferlen_to_descs(ioat, len);
/* we need 2x the number of descriptors to cover greater than 3
- * sources
+ * sources (we need 1 extra source in the q-only continuation
+ * case and 3 extra sources in the p+q continuation case.
*/
- if (src_cnt > 3 || flags & DMA_PREP_CONTINUE) {
+ if (src_cnt + dmaf_p_disabled_continue(flags) > 3 ||
+ (dmaf_continue(flags) && !dmaf_p_disabled_continue(flags))) {
with_ext = 1;
num_descs *= 2;
} else


\
 
 \ /
  Last update: 2009-12-23 01:29    [W:0.070 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site