lkml.org 
[lkml]   [2009]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH tip/core/rcu 2/4] rcu: enable fourth level of TREE_RCU hierarchy
Date
From: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Enable a fourth level of rcu_node hierarchy for TREE_RCU and
TREE_PREEMPT_RCU. This is for stress-testing and experiemental
purposes only, although in theory this would enable 16,777,216 CPUs
on 64-bit systems, though only 1,048,576 CPUs on 32-bit systems.
Normal experimental use of this fourth level will normally set
CONFIG_RCU_FANOUT=2, requiring a 16-CPU system, though the more
adventurous (and more fortunate) experimenters may wish to chose
CONFIG_RCU_FANOUT=3 for 81-CPU systems or even CONFIG_RCU_FANOUT=4 for
256-CPU systems.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---
kernel/rcutree.c | 6 +++++-
kernel/rcutree.h | 15 +++++++++++++--
2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index a9f5103..d47e03e 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -60,7 +60,8 @@ static struct lock_class_key rcu_node_class[NUM_RCU_LVLS];
NUM_RCU_LVL_0, /* root of hierarchy. */ \
NUM_RCU_LVL_1, \
NUM_RCU_LVL_2, \
- NUM_RCU_LVL_3, /* == MAX_RCU_LVLS */ \
+ NUM_RCU_LVL_3, \
+ NUM_RCU_LVL_4, /* == MAX_RCU_LVLS */ \
}, \
.signaled = RCU_GP_IDLE, \
.gpnum = -300, \
@@ -1877,6 +1878,9 @@ void __init rcu_init(void)
#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n");
#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+#if NUM_RCU_LVL_4 != 0
+ printk(KERN_INFO "Experimental four-level hierarchy is enabled.\n");
+#endif /* #if NUM_RCU_LVL_4 != 0 */
RCU_INIT_FLAVOR(&rcu_sched_state, rcu_sched_data);
RCU_INIT_FLAVOR(&rcu_bh_state, rcu_bh_data);
__rcu_init_preempt();
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 8bb03cb..df2e0b6 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -34,10 +34,11 @@
* In practice, this has not been tested, so there is probably some
* bug somewhere.
*/
-#define MAX_RCU_LVLS 3
+#define MAX_RCU_LVLS 4
#define RCU_FANOUT (CONFIG_RCU_FANOUT)
#define RCU_FANOUT_SQ (RCU_FANOUT * RCU_FANOUT)
#define RCU_FANOUT_CUBE (RCU_FANOUT_SQ * RCU_FANOUT)
+#define RCU_FANOUT_FOURTH (RCU_FANOUT_CUBE * RCU_FANOUT)

#if NR_CPUS <= RCU_FANOUT
# define NUM_RCU_LVLS 1
@@ -45,23 +46,33 @@
# define NUM_RCU_LVL_1 (NR_CPUS)
# define NUM_RCU_LVL_2 0
# define NUM_RCU_LVL_3 0
+# define NUM_RCU_LVL_4 0
#elif NR_CPUS <= RCU_FANOUT_SQ
# define NUM_RCU_LVLS 2
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
# define NUM_RCU_LVL_2 (NR_CPUS)
# define NUM_RCU_LVL_3 0
+# define NUM_RCU_LVL_4 0
#elif NR_CPUS <= RCU_FANOUT_CUBE
# define NUM_RCU_LVLS 3
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_SQ)
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
# define NUM_RCU_LVL_3 NR_CPUS
+# define NUM_RCU_LVL_4 0
+#elif NR_CPUS <= RCU_FANOUT_FOURTH
+# define NUM_RCU_LVLS 4
+# define NUM_RCU_LVL_0 1
+# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_CUBE)
+# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_SQ)
+# define NUM_RCU_LVL_3 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
+# define NUM_RCU_LVL_4 NR_CPUS
#else
# error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
#endif /* #if (NR_CPUS) <= RCU_FANOUT */

-#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3)
+#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3 + NUM_RCU_LVL_4)
#define NUM_RCU_NODES (RCU_SUM - NR_CPUS)

/*
--
1.5.2.5


\
 
 \ /
  Last update: 2009-12-02 21:15    [W:0.072 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site