lkml.org 
[lkml]   [2009]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[042/151] pata_hpt{37x|3x2n}: fix timing register masks (take 2)
2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Sergei Shtylyov <sshtylyov@ru.mvista.com>

commit 5600c70e576199a7552e1c0fff43f3fe16f5566e upstream.

These drivers inherited from the older 'hpt366' IDE driver the buggy timing
register masks in their set_piomode() metods. As a result, too low command
cycle active time is programmed for slow PIO modes. Quite fortunately, it's
later "fixed up" by the set_dmamode() methods which also "helpfully" reprogram
the command timings, usually to PIO mode 4; unfortunately, setting an UltraDMA
mode #N also reprograms already set PIO data timings, usually to MWDMA mode #
max(N, 2) timings...

However, the drivers added some breakage of their own too: the bit that they
set/clear to control the FIFO is sometimes wrong -- it's actually the MSB of
the command cycle setup time; also, setting it in DMA mode is wrong as this
bit is only for PIO actually and clearing it for PIO modes is not needed as
no mode in any timing table has it set...

Fix all this, inverting the masks while at it, like in the 'hpt366' and
'pata_hpt366' drivers; bump the drivers' versions, accounting for recent
patches that forgot to do it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/ata/pata_hpt37x.c | 32 +++++++++++++++-----------------
drivers/ata/pata_hpt3x2n.c | 17 ++++++++---------
2 files changed, 23 insertions(+), 26 deletions(-)

--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -24,7 +24,7 @@
#include <linux/libata.h>

#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.12"
+#define DRV_VERSION "0.6.14"

struct hpt_clock {
u8 xfer_speed;
@@ -404,9 +404,8 @@ static void hpt370_set_piomode(struct at

pci_read_config_dword(pdev, addr1, &reg);
mode = hpt37x_find_mode(ap, adev->pio_mode);
- mode &= ~0x8000000; /* No FIFO in PIO */
- mode &= ~0x30070000; /* Leave config bits alone */
- reg &= 0x30070000; /* Strip timing bits */
+ mode &= 0xCFC3FFFF; /* Leave DMA bits alone */
+ reg &= ~0xCFC3FFFF; /* Strip timing bits */
pci_write_config_dword(pdev, addr1, reg | mode);
}

@@ -423,8 +422,7 @@ static void hpt370_set_dmamode(struct at
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u32 addr1, addr2;
- u32 reg;
- u32 mode;
+ u32 reg, mode, mask;
u8 fast;

addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
@@ -436,11 +434,12 @@ static void hpt370_set_dmamode(struct at
fast |= 0x01;
pci_write_config_byte(pdev, addr2, fast);

+ mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
+
pci_read_config_dword(pdev, addr1, &reg);
mode = hpt37x_find_mode(ap, adev->dma_mode);
- mode |= 0x8000000; /* FIFO in MWDMA or UDMA */
- mode &= ~0xC0000000; /* Leave config bits alone */
- reg &= 0xC0000000; /* Strip timing bits */
+ mode &= mask;
+ reg &= ~mask;
pci_write_config_dword(pdev, addr1, reg | mode);
}

@@ -508,9 +507,8 @@ static void hpt372_set_piomode(struct at
mode = hpt37x_find_mode(ap, adev->pio_mode);

printk("Find mode for %d reports %X\n", adev->pio_mode, mode);
- mode &= ~0x80000000; /* No FIFO in PIO */
- mode &= ~0x30070000; /* Leave config bits alone */
- reg &= 0x30070000; /* Strip timing bits */
+ mode &= 0xCFC3FFFF; /* Leave DMA bits alone */
+ reg &= ~0xCFC3FFFF; /* Strip timing bits */
pci_write_config_dword(pdev, addr1, reg | mode);
}

@@ -527,8 +525,7 @@ static void hpt372_set_dmamode(struct at
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u32 addr1, addr2;
- u32 reg;
- u32 mode;
+ u32 reg, mode, mask;
u8 fast;

addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
@@ -539,12 +536,13 @@ static void hpt372_set_dmamode(struct at
fast &= ~0x07;
pci_write_config_byte(pdev, addr2, fast);

+ mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
+
pci_read_config_dword(pdev, addr1, &reg);
mode = hpt37x_find_mode(ap, adev->dma_mode);
printk("Find mode for DMA %d reports %X\n", adev->dma_mode, mode);
- mode &= ~0xC0000000; /* Leave config bits alone */
- mode |= 0x80000000; /* FIFO in MWDMA or UDMA */
- reg &= 0xC0000000; /* Strip timing bits */
+ mode &= mask;
+ reg &= ~mask;
pci_write_config_dword(pdev, addr1, reg | mode);
}

--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>

#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.4"
+#define DRV_VERSION "0.3.7"

enum {
HPT_PCI_FAST = (1 << 31),
@@ -185,9 +185,8 @@ static void hpt3x2n_set_piomode(struct a

pci_read_config_dword(pdev, addr1, &reg);
mode = hpt3x2n_find_mode(ap, adev->pio_mode);
- mode &= ~0x8000000; /* No FIFO in PIO */
- mode &= ~0x30070000; /* Leave config bits alone */
- reg &= 0x30070000; /* Strip timing bits */
+ mode &= 0xCFC3FFFF; /* Leave DMA bits alone */
+ reg &= ~0xCFC3FFFF; /* Strip timing bits */
pci_write_config_dword(pdev, addr1, reg | mode);
}

@@ -204,8 +203,7 @@ static void hpt3x2n_set_dmamode(struct a
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u32 addr1, addr2;
- u32 reg;
- u32 mode;
+ u32 reg, mode, mask;
u8 fast;

addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
@@ -216,11 +214,12 @@ static void hpt3x2n_set_dmamode(struct a
fast &= ~0x07;
pci_write_config_byte(pdev, addr2, fast);

+ mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
+
pci_read_config_dword(pdev, addr1, &reg);
mode = hpt3x2n_find_mode(ap, adev->dma_mode);
- mode |= 0x8000000; /* FIFO in MWDMA or UDMA */
- mode &= ~0xC0000000; /* Leave config bits alone */
- reg &= 0xC0000000; /* Strip timing bits */
+ mode &= mask;
+ reg &= ~mask;
pci_write_config_dword(pdev, addr1, reg | mode);
}




\
 
 \ /
  Last update: 2009-12-17 05:43    [W:0.313 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site