lkml.org 
[lkml]   [2009]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [drm] nouveau iMac crashes and burns
    From
    o.k. I didn't see the urls at the bottom pointing
    to where to get the firmware(was figuring out the trace thing.

    Anyways I think I need to generate a new firmware file because
    even with the firmware compiled in I still freeze up:


    <7>[ 6.492976] nouveau 0000:02:00.0: setting latency timer to 64
    <6>[ 6.495238] [drm] nouveau 0000:02:00.0: Detected an NV50
    generation card (0x094700a1)
    <6>[ 6.515838] [drm] nouveau 0000:02:00.0: Attempting to load BIOS
    image from PRAMIN
    <6>[ 6.565633] usb 1-1.3: new low speed USB device using ehci_hcd
    and address 6
    <6>[ 6.593407] [drm] nouveau 0000:02:00.0: ... appears to be valid
    <6>[ 6.607755] [drm] nouveau 0000:02:00.0: BIT BIOS found
    <6>[ 6.621926] [drm] nouveau 0000:02:00.0: Bios version 62.94.74.00
    <4>[ 6.635626] [drm] nouveau 0000:02:00.0: TMDS table revision 2.0
    not currently supported
    <6>[ 6.649157] [drm] nouveau 0000:02:00.0: Found Display
    Configuration Block version 4.0
    <6>[ 6.662635] [drm] nouveau 0000:02:00.0: DCB connector table:
    VHER 0x40 5 16 4
    <6>[ 6.669105] input: Mitsumi Electric Apple Optical USB Mouse as
    /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input8
    <6>[ 6.669194] apple 0003:05AC:0304.0003: input: USB HID v1.10
    Mouse [Mitsumi Electric Apple Optical USB Mouse] on
    usb-0000:00:04.1-1.3/input0
    <6>[ 6.704298] [drm] nouveau 0000:02:00.0: 0: 0x00000040: type
    0x40 idx 0 tag 0xff
    <6>[ 6.718420] [drm] nouveau 0000:02:00.0: 1: 0x00001161: type
    0x61 idx 1 tag 0x07
    <6>[ 6.732352] [drm] nouveau 0000:02:00.0: 2: 0x00001231: type
    0x31 idx 2 tag 0x07
    <6>[ 6.746063] [drm] nouveau 0000:02:00.0: 3: 0x01100331: type
    0x31 idx 3 tag 0xff
    <6>[ 6.746065] [drm] nouveau 0000:02:00.0: 4: 0x01100446: type
    0x46 idx 4 tag 0xff
    <6>[ 6.746067] [drm] nouveau 0000:02:00.0: 5: 0x02000546: type
    0x46 idx 5 tag 0xff
    <6>[ 6.746069] [drm] nouveau 0000:02:00.0: 6: 0x00410631: type
    0x31 idx 6 tag 0x51
    <6>[ 6.746070] [drm] nouveau 0000:02:00.0: 7: 0x00410746: type
    0x46 idx 7 tag 0x51
    <6>[ 6.746072] [drm] nouveau 0000:02:00.0: 8: 0x00020846: type
    0x46 idx 8 tag 0x52
    <6>[ 6.746074] [drm] nouveau 0000:02:00.0: 9: 0x00000900: type
    0x00 idx 9 tag 0xff
    <5>[ 6.746076] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000113 00010034
    <5>[ 6.746078] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 040142a6 0f220010
    <5>[ 6.746079] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04014242 00020010
    <6>[ 6.746086] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table
    0 at offset 0xD216
    <6>[ 6.934477] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table
    1 at offset 0xD685
    <6>[ 6.962090] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table
    2 at offset 0xE64E
    <6>[ 6.974498] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table
    3 at offset 0xE76F
    <6>[ 6.988191] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table
    4 at offset 0xEA96
    <6>[ 7.000396] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table
    at offset 0xEAFB
    <4>[ 7.033096] [drm] nouveau 0000:02:00.0: 0xEAFB: Condition still
    not met after 20ms, skipping following opcodes
    <6>[ 7.055682] [drm] nouveau 0000:02:00.0: 0xB45C: parsing output script 0
    <6>[ 7.078326] [drm] nouveau 0000:02:00.0: 0xBB62: parsing output script 0
    <6>[ 7.100583] [drm] nouveau 0000:02:00.0: 0xB8A4: parsing output script 0
    <6>[ 7.225581] [TTM] Zone kernel: Available graphics memory: 2016018 kiB.
    <6>[ 7.240487] [drm] nouveau 0000:02:00.0: 512 MiB VRAM
    <7>[ 7.240520] ieee1394: The root node is not cycle master capable;
    selecting a new root node and resetting...
    <6>[ 7.264721] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
    <6>[ 7.277953] nouveau 0000:02:00.0: firmware: using built-in
    firmware nouveau/nv94.ctxprog
    <6>[ 7.290232] nouveau 0000:02:00.0: firmware: using built-in
    firmware nouveau/nv94.ctxvals
    <6>[ 7.302607] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1
    <6>[ 7.302626] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127
    <6>[ 7.302629] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127
    <6>[ 7.302632] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127


    <---long trail of these ----->


    <6>[ 7.303118] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127
    <6>[ 7.303120] [drm] nouveau 0000:02:00.0: PFIFO still angry after
    101 spins, halt
    <6>[ 7.782786] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc:
    initialised FIFO 1
    <7>[ 7.972267] ieee1394: Speed probe of node 0-00:1023 yields S400
    <7>[ 7.972954] ieee1394: Node added: ID:BUS[0-00:1023]
    GUID[0019e3fffe2ad87e]
    <7>[ 7.973293] ieee1394: Host added: ID:BUS[0-01:1023]
    GUID[0023dffffe8cd104]
    <6>[ 7.978665] eth1394: eth0: IPv4 over IEEE 1394 (fw-host0)
    <3>[ 9.403981] [drm] nouveau 0000:02:00.0: PRAMIN flush timeout


    looking at
    http://nouveau.freedesktop.org/wiki/CtxInit
    seems understandable to me, and I'm willing to
    try this out(even if I go crazy), but could take a while.

    --
    Justin P. Mattock


    \
     
     \ /
      Last update: 2009-12-16 04:25    [W:0.036 / U:1.156 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site