lkml.org 
[lkml]   [2009]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: kexec boot regression
Jens Axboe wrote:
> On Tue, Dec 15 2009, Yinghai Lu wrote:
>>>>>>>
>>>>>> let see how BIOS mess it up again!
>>>>> Heh, I had a feeling this was coming :-)

[ 0.000000] user-defined physical RAM map:

[ 0.000000] user: 0000000000000100 - 0000000000098800 (usable)

[ 0.000000] user: 0000000000098800 - 00000000000a0000 (reserved)

[ 0.000000] user: 00000000000e0000 - 0000000000100000 (reserved)

[ 0.000000] user: 0000000000100000 - 0000000078c63000 (usable)

[ 0.000000] user: 0000000078c63000 - 0000000078e77000 (ACPI NVS)

[ 0.000000] user: 0000000078e77000 - 000000007924e000 (ACPI data)

[ 0.000000] user: 000000007924e000 - 00000000792c2000 (reserved)

[ 0.000000] user: 00000000792c2000 - 00000000792d2000 (ACPI data)

[ 0.000000] user: 00000000792d2000 - 00000000792e7000 (reserved)

[ 0.000000] user: 00000000792e7000 - 0000000079301000 (ACPI data)

[ 0.000000] user: 0000000079301000 - 0000000079303000 (reserved)

[ 0.000000] user: 0000000079303000 - 0000000079305000 (ACPI data)


[ 0.000000] user: 0000000079305000 - 0000000079310000 (reserved)

[ 0.000000] user: 0000000079310000 - 0000000079314000 (ACPI data)

[ 0.000000] user: 0000000079314000 - 0000000079319000 (reserved)

[ 0.000000] user: 0000000079319000 - 0000000079336000 (ACPI data)

[ 0.000000] user: 0000000079336000 - 0000000079358000 (reserved)

[ 0.000000] user: 0000000079358000 - 0000000079388000 (ACPI data)

[ 0.000000] user: 0000000079388000 - 00000000793c9000 (reserved)

[ 0.000000] user: 00000000793c9000 - 000000007968f000 (ACPI data)

[ 0.000000] user: 000000007968f000 - 00000000796bb000 (reserved)

[ 0.000000] user: 00000000796bb000 - 00000000799d8000 (ACPI data)

[ 0.000000] user: 00000000799d8000 - 0000000079bd8000 (ACPI NVS)

[ 0.000000] user: 0000000079bd8000 - 0000000079d87000 (ACPI data)

[ 0.000000] user: 0000000079d87000 - 0000000079d8a000 (reserved)

[ 0.000000] user: 0000000079d8a000 - 0000000079dca000 (ACPI data)

[ 0.000000] user: 0000000079dca000 - 0000000079dcb000 (reserved)

[ 0.000000] user: 0000000079dcb000 - 0000000079e1c000 (ACPI data)

[ 0.000000] user: 0000000079e1c000 - 0000000079e87000 (reserved)

[ 0.000000] user: 0000000079e87000 - 000000007bd5f000 (ACPI data)

[ 0.000000] user: 000000007bd5f000 - 000000007be4f000 (reserved)

[ 0.000000] user: 000000007be4f000 - 000000007bf87000 (ACPI data)

[ 0.000000] user: 0000000100000000 - 0000001080000000 (usable)
...
[ 0.000000] SRAT: Node 0 PXM 0 0-80000000

[ 0.000000] SRAT: Node 0 PXM 0 100000000-480000000

[ 0.000000] SRAT: Node 2 PXM 1 480000000-880000000

[ 0.000000] SRAT: Node 1 PXM 2 880000000-c80000000

[ 0.000000] SRAT: Node 3 PXM 3 c80000000-1080000000

[ 0.000000] ACPI: [SRAT:0x01] ignored 16 entries of 32 found

[ 0.000000] NUMA: Using 31 for the hash shift.

[ 0.000000] SRAT: PXMs only cover 49035MB of your 65419MB e820 RAM. Not used.

[ 0.000000] SRAT: SRAT not used.

[ 0.000000] No NUMA configuration found

so SRAT is broken?

if (max_entries && count > max_entries) {
printk(KERN_WARNING PREFIX "[%4.4s:0x%02x] ignored %i entries of "
"%i found\n", id, entry_id, count - max_entries, count);
}
...

or what is your CONFIG_NODES_SHIFT? 3? can you try to set it to 6?

[ 13.018720] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)

[ 13.100724] [Firmware Bug]: PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources

[ 13.112475] PCI: not using MMCONFIG

[ 13.206650] ACPI: No dock devices found.

so mmconf is not used...<ask BIOS fix it please!>

then we get

[ 13.990335] IOH bus: [00, 00]

[ 13.993707] IOH bus: 00 index 0 io port: [0, fff]

[ 13.999023] IOH bus: 00 index 1 mmio: [0, ffffff]

[ 14.004335] IOH bus: 00 index 2 mmio: [0, 3ffffff]

please check

[PATCH] x86/pci: intel ioh bus num reg accessing fix

it is above 0x100, so if mmconf is not enable, need to skip it

Reported-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
arch/x86/pci/intel_bus.c | 4 ++++
1 file changed, 4 insertions(+)

Index: linux-2.6/arch/x86/pci/intel_bus.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/intel_bus.c
+++ linux-2.6/arch/x86/pci/intel_bus.c
@@ -49,6 +49,10 @@ static void __devinit pci_root_bus_res(s
u64 mmioh_base, mmioh_end;
int bus_base, bus_end;

+ /* some sys doesn't get mmconf enabled */
+ if (dev->cfg_size < 0x200)
+ return;
+
if (pci_root_num >= PCI_ROOT_NR) {
printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n");
return;

\
 
 \ /
  Last update: 2009-12-15 19:45    [W:0.078 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site