lkml.org 
[lkml]   [2009]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: GPIO support for HTC Dream
Hi!

Ok, thanks to Ryan and everyone... You were right, the code was way
too complex.

Cleaning it up according to Hartley's great howto resulted in:

arch/arm/Kconfig | 1
arch/arm/mach-msm/board-dream-gpio.c | 327 +++++++++--------------------------
arch/arm/mach-msm/board-dream.c | 24 --
arch/arm/mach-msm/generic_gpio.c | 270 ----------------------------
arch/arm/mach-msm/gpio_chip.h | 30 ---
kernel/printk.c | 6
6 files changed, 102 insertions(+), 556 deletions(-)

> As Ryan says, using gpiolib will clean this up immensely.
>
> It appears the what you really have for gpio's is 7 8-bit ports that start
> with gpio number 128. Each port appears to only have one control register.
> This register is written with a '1' to drive the gpio as a high output and
> '0' to drive it as a low output or to use it as an input. Not really
> sure if this is correct since the code is a bit screwy.

It seems it is, because it seems to work.

> Your current code is written so that all of the gpio's are in one "chip".
> Because of this you are having to calculate the 'reg' needed to access the
> gpio whenever you need to read or write to a gpio.
>
> If you follow the ep93xx implementation you can break the whole thing down
> into 'banks' and simplify everything. Something like:

...and get 100 lines of results, instead of 600... Yep, thanks.

Now, it will still need some cleanups -- I'm not sure if gpios are
dream-specific or generic for whole msm.... I kind of assume they
should be generic for msm. Google people, can you help?

> static struct dream_gpio_chip dream_gpio_banks[] = {
> DREAM_GPIO_BANK("MISC2", 0x00, DREAM_GPIO_MISC2_BASE),
> DREAM_GPIO_BANK("MISC3", 0x02, DREAM_GPIO_MISC3_BASE),
> DREAM_GPIO_BANK("MISC4", 0x04, DREAM_GPIO_MISC4_BASE),
> DREAM_GPIO_BANK("MISC5", 0x06, DREAM_GPIO_MISC5_BASE),
> DREAM_GPIO_BANK("INT2", 0x08, DREAM_GPIO_INT2_BASE),
> DREAM_GPIO_BANK("MISC1", 0x0a, DREAM_GPIO_MISC1_BASE),
> DREAM_GPIO_BANK("VIRTUAL", 0x12, DREAM_GPIO_VIRTUAL_BASE),
> };

Yep, that did the trick.

> With this you can now just access the dream_gpio_chip data in all
> the member function using the to_dream_gpio_chip() macro.
>
> I agree with Ryan and think you would be better off in the long
> run to re-code this and use gpiolib. You might also want to break
> out all the gpio interrupt stuff and submit it as a seperate patch.

Will do. Here's how the patch looks now.

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1c4119c..8bb8546 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -565,6 +565,8 @@ config ARCH_MSM
select CPU_V6
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
help
Support for Qualcomm MSM7K based systems. This runs on the ARM11
apps processor of the MSM7K and depends on a shared memory
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 91e6f5c..4c2567e 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -6,4 +6,4 @@ obj-y += clock.o clock-7x01a.o

obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o

-obj-$(CONFIG_MACH_TROUT) += board-dream.o
+obj-$(CONFIG_MACH_TROUT) += board-dream.o board-dream-gpio.o generic_gpio.o
diff --git a/arch/arm/mach-msm/board-dream-gpio.c b/arch/arm/mach-msm/board-dream-gpio.c
new file mode 100644
index 0000000..d90b8f9
--- /dev/null
+++ b/arch/arm/mach-msm/board-dream-gpio.c
@@ -0,0 +1,135 @@
+/*
+ * linux/arch/arm/mach-msm/gpio.c
+ *
+ * Copyright (C) 2005 HP Labs
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (C) 2009 Pavel Machek <pavel@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+#include <asm/gpio.h>
+
+#include "board-dream.h"
+
+struct msm_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *reg; /* Base of register bank */
+ u8 shadow;
+};
+
+#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip)
+
+static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
+static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset);
+static int msm_gpiolib_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val);
+static int msm_gpiolib_direction_input(struct gpio_chip *chip,
+ unsigned offset);
+
+#define DREAM_GPIO_BANK(name, reg_num, base_gpio, shadow_val) \
+ { \
+ .chip = { \
+ .label = name, \
+ .direction_input = msm_gpiolib_direction_input, \
+ .direction_output = msm_gpiolib_direction_output, \
+ .get = msm_gpiolib_get, \
+ .set = msm_gpiolib_set, \
+ .base = base_gpio, \
+ .ngpio = 8, \
+ }, \
+ .reg = reg_num + DREAM_CPLD_BASE, \
+ .shadow = shadow_val, \
+ }
+
+static struct msm_gpio_chip msm_gpio_banks[] = {
+#if defined(CONFIG_MSM_DEBUG_UART1)
+ /* H2W pins <-> UART1 */
+ DREAM_GPIO_BANK("MISC2", 0x00, DREAM_GPIO_MISC2_BASE, 0x40),
+#else
+ /* H2W pins <-> UART3, Bluetooth <-> UART1 */
+ DREAM_GPIO_BANK("MISC2", 0x00, DREAM_GPIO_MISC2_BASE, 0x80),
+#endif
+ /* I2C pull */
+ DREAM_GPIO_BANK("MISC3", 0x02, DREAM_GPIO_MISC3_BASE, 0x04),
+ DREAM_GPIO_BANK("MISC4", 0x04, DREAM_GPIO_MISC4_BASE, 0),
+ /* mmdi 32k en */
+ DREAM_GPIO_BANK("MISC5", 0x06, DREAM_GPIO_MISC5_BASE, 0x04),
+ DREAM_GPIO_BANK("INT2", 0x08, DREAM_GPIO_INT2_BASE, 0),
+ DREAM_GPIO_BANK("MISC1", 0x0a, DREAM_GPIO_MISC1_BASE, 0),
+ DREAM_GPIO_BANK("VIRTUAL", 0x12, DREAM_GPIO_VIRTUAL_BASE, 0),
+};
+
+static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+ unsigned mask = 1 << offset;
+
+ return !! (readb(msm_gpio->reg) & mask);
+}
+
+static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+ unsigned mask = 1 << offset;
+
+ if (val)
+ msm_gpio->shadow |= mask;
+ else
+ msm_gpio->shadow &= ~mask;
+
+ writeb(msm_gpio->shadow, msm_gpio->reg);
+}
+
+static int msm_gpiolib_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ msm_gpiolib_set(chip, offset, 0);
+ return 0;
+}
+
+static int msm_gpiolib_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val)
+{
+ msm_gpiolib_set(chip, offset, val);
+ return 0;
+}
+
+int gpio_to_irq(unsigned gpio)
+{
+ BUG();
+}
+
+/*
+ * Called from the processor-specific init to enable GPIO pin support.
+ */
+int __init dream_init_gpio(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++)
+ gpiochip_add(&msm_gpio_banks[i].chip);
+
+ return 0;
+}
+
+postcore_initcall(dream_init_gpio);
+
diff --git a/arch/arm/mach-msm/board-dream.h b/arch/arm/mach-msm/board-dream.h
index 4f345a5..aab1faf 100644
--- a/arch/arm/mach-msm/board-dream.h
+++ b/arch/arm/mach-msm/board-dream.h
@@ -1,5 +1,153 @@

-#define TROUT_CPLD_BASE 0xE8100000
-#define TROUT_CPLD_START 0x98000000
-#define TROUT_CPLD_SIZE SZ_4K
+#define MSM_SMI_BASE 0x00000000
+#define MSM_SMI_SIZE 0x00800000

+#define MSM_EBI_BASE 0x10000000
+#define MSM_EBI_SIZE 0x06e00000
+
+#define MSM_PMEM_GPU0_BASE 0x00000000
+#define MSM_PMEM_GPU0_SIZE 0x00700000
+
+#define MSM_PMEM_MDP_BASE 0x02000000
+#define MSM_PMEM_MDP_SIZE 0x00800000
+
+#define MSM_PMEM_ADSP_BASE 0x02800000
+#define MSM_PMEM_ADSP_SIZE 0x00800000
+
+#define MSM_PMEM_CAMERA_BASE 0x03000000
+#define MSM_PMEM_CAMERA_SIZE 0x00800000
+
+#define MSM_FB_BASE 0x03800000
+#define MSM_FB_SIZE 0x00100000
+
+#define MSM_LINUX_BASE MSM_EBI_BASE
+#define MSM_LINUX_SIZE 0x06500000
+
+#define MSM_PMEM_GPU1_SIZE 0x800000
+#define MSM_PMEM_GPU1_BASE (MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE)
+
+#define MSM_RAM_CONSOLE_BASE (MSM_EBI_BASE + 0x6d00000)
+#define MSM_RAM_CONSOLE_SIZE (128 * SZ_1K)
+
+#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
+#error invalid memory map
+#endif
+
+#define DECLARE_MSM_IOMAP
+#include <mach/msm_iomap.h>
+
+#define DREAM_4_BALL_UP_0 1
+#define DREAM_4_BALL_LEFT_0 18
+#define DREAM_4_BALL_DOWN_0 57
+#define DREAM_4_BALL_RIGHT_0 91
+
+#define DREAM_5_BALL_UP_0 94
+#define DREAM_5_BALL_LEFT_0 18
+#define DREAM_5_BALL_DOWN_0 90
+#define DREAM_5_BALL_RIGHT_0 19
+
+#define DREAM_POWER_KEY 20
+
+#define DREAM_4_TP_LS_EN 19
+#define DREAM_5_TP_LS_EN 1
+
+#define DREAM_CPLD_BASE 0xE8100000
+#define DREAM_CPLD_START 0x98000000
+#define DREAM_CPLD_SIZE SZ_4K
+
+#define DREAM_GPIO_CABLE_IN1 (83)
+#define DREAM_GPIO_CABLE_IN2 (49)
+
+#define DREAM_GPIO_START (128)
+
+#define DREAM_GPIO_INT_MASK0_REG (0x0c)
+#define DREAM_GPIO_INT_STAT0_REG (0x0e)
+#define DREAM_GPIO_INT_MASK1_REG (0x14)
+#define DREAM_GPIO_INT_STAT1_REG (0x10)
+
+#define DREAM_GPIO_HAPTIC_PWM (28)
+#define DREAM_GPIO_PS_HOLD (25)
+
+#define DREAM_GPIO_MISC2_BASE (DREAM_GPIO_START + 0x00)
+#define DREAM_GPIO_MISC3_BASE (DREAM_GPIO_START + 0x08)
+#define DREAM_GPIO_MISC4_BASE (DREAM_GPIO_START + 0x10)
+#define DREAM_GPIO_MISC5_BASE (DREAM_GPIO_START + 0x18)
+#define DREAM_GPIO_INT2_BASE (DREAM_GPIO_START + 0x20)
+#define DREAM_GPIO_MISC1_BASE (DREAM_GPIO_START + 0x28)
+#define DREAM_GPIO_VIRTUAL_BASE (DREAM_GPIO_START + 0x30)
+#define DREAM_GPIO_INT5_BASE (DREAM_GPIO_START + 0x48)
+
+#define DREAM_GPIO_CHARGER_EN (DREAM_GPIO_MISC2_BASE + 0)
+#define DREAM_GPIO_ISET (DREAM_GPIO_MISC2_BASE + 1)
+#define DREAM_GPIO_H2W_DAT_DIR (DREAM_GPIO_MISC2_BASE + 2)
+#define DREAM_GPIO_H2W_CLK_DIR (DREAM_GPIO_MISC2_BASE + 3)
+#define DREAM_GPIO_H2W_DAT_GPO (DREAM_GPIO_MISC2_BASE + 4)
+#define DREAM_GPIO_H2W_CLK_GPO (DREAM_GPIO_MISC2_BASE + 5)
+#define DREAM_GPIO_H2W_SEL0 (DREAM_GPIO_MISC2_BASE + 6)
+#define DREAM_GPIO_H2W_SEL1 (DREAM_GPIO_MISC2_BASE + 7)
+
+#define DREAM_GPIO_SPOTLIGHT_EN (DREAM_GPIO_MISC3_BASE + 0)
+#define DREAM_GPIO_FLASH_EN (DREAM_GPIO_MISC3_BASE + 1)
+#define DREAM_GPIO_I2C_PULL (DREAM_GPIO_MISC3_BASE + 2)
+#define DREAM_GPIO_TP_I2C_PULL (DREAM_GPIO_MISC3_BASE + 3)
+#define DREAM_GPIO_TP_EN (DREAM_GPIO_MISC3_BASE + 4)
+#define DREAM_GPIO_JOG_EN (DREAM_GPIO_MISC3_BASE + 5)
+#define DREAM_GPIO_UI_LED_EN (DREAM_GPIO_MISC3_BASE + 6)
+#define DREAM_GPIO_QTKEY_LED_EN (DREAM_GPIO_MISC3_BASE + 7)
+
+#define DREAM_GPIO_VCM_PWDN (DREAM_GPIO_MISC4_BASE + 0)
+#define DREAM_GPIO_USB_H2W_SW (DREAM_GPIO_MISC4_BASE + 1)
+#define DREAM_GPIO_COMPASS_RST_N (DREAM_GPIO_MISC4_BASE + 2)
+#define DREAM_GPIO_HAPTIC_EN_UP (DREAM_GPIO_MISC4_BASE + 3)
+#define DREAM_GPIO_HAPTIC_EN_MAIN (DREAM_GPIO_MISC4_BASE + 4)
+#define DREAM_GPIO_USB_PHY_RST_N (DREAM_GPIO_MISC4_BASE + 5)
+#define DREAM_GPIO_WIFI_PA_RESETX (DREAM_GPIO_MISC4_BASE + 6)
+#define DREAM_GPIO_WIFI_EN (DREAM_GPIO_MISC4_BASE + 7)
+
+#define DREAM_GPIO_BT_32K_EN (DREAM_GPIO_MISC5_BASE + 0)
+#define DREAM_GPIO_MAC_32K_EN (DREAM_GPIO_MISC5_BASE + 1)
+#define DREAM_GPIO_MDDI_32K_EN (DREAM_GPIO_MISC5_BASE + 2)
+#define DREAM_GPIO_COMPASS_32K_EN (DREAM_GPIO_MISC5_BASE + 3)
+
+#define DREAM_GPIO_NAVI_ACT_N (DREAM_GPIO_INT2_BASE + 0)
+#define DREAM_GPIO_COMPASS_IRQ (DREAM_GPIO_INT2_BASE + 1)
+#define DREAM_GPIO_SLIDING_DET (DREAM_GPIO_INT2_BASE + 2)
+#define DREAM_GPIO_AUD_HSMIC_DET_N (DREAM_GPIO_INT2_BASE + 3)
+#define DREAM_GPIO_SD_DOOR_N (DREAM_GPIO_INT2_BASE + 4)
+#define DREAM_GPIO_CAM_BTN_STEP1_N (DREAM_GPIO_INT2_BASE + 5)
+#define DREAM_GPIO_CAM_BTN_STEP2_N (DREAM_GPIO_INT2_BASE + 6)
+#define DREAM_GPIO_TP_ATT_N (DREAM_GPIO_INT2_BASE + 7)
+#define DREAM_GPIO_BANK0_FIRST_INT_SOURCE (DREAM_GPIO_NAVI_ACT_N)
+#define DREAM_GPIO_BANK0_LAST_INT_SOURCE (DREAM_GPIO_TP_ATT_N)
+
+#define DREAM_GPIO_H2W_DAT_GPI (DREAM_GPIO_MISC1_BASE + 0)
+#define DREAM_GPIO_H2W_CLK_GPI (DREAM_GPIO_MISC1_BASE + 1)
+#define DREAM_GPIO_CPLD128_VER_0 (DREAM_GPIO_MISC1_BASE + 4)
+#define DREAM_GPIO_CPLD128_VER_1 (DREAM_GPIO_MISC1_BASE + 5)
+#define DREAM_GPIO_CPLD128_VER_2 (DREAM_GPIO_MISC1_BASE + 6)
+#define DREAM_GPIO_CPLD128_VER_3 (DREAM_GPIO_MISC1_BASE + 7)
+
+#define DREAM_GPIO_SDMC_CD_N (DREAM_GPIO_VIRTUAL_BASE + 0)
+#define DREAM_GPIO_END (DREAM_GPIO_SDMC_CD_N)
+#define DREAM_GPIO_BANK1_FIRST_INT_SOURCE (DREAM_GPIO_SDMC_CD_N)
+#define DREAM_GPIO_BANK1_LAST_INT_SOURCE (DREAM_GPIO_SDMC_CD_N)
+
+#define DREAM_GPIO_VIRTUAL_TO_REAL_OFFSET \
+ (DREAM_GPIO_INT5_BASE - DREAM_GPIO_VIRTUAL_BASE)
+
+#define DREAM_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS)
+#define DREAM_INT_BANK0_COUNT (8)
+#define DREAM_INT_BANK1_START (DREAM_INT_START + DREAM_INT_BANK0_COUNT)
+#define DREAM_INT_BANK1_COUNT (1)
+#define DREAM_INT_END (DREAM_INT_START + DREAM_INT_BANK0_COUNT + \
+ DREAM_INT_BANK1_COUNT - 1)
+#define DREAM_GPIO_TO_INT(n) (((n) <= DREAM_GPIO_BANK0_LAST_INT_SOURCE) ? \
+ (DREAM_INT_START - DREAM_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \
+ (DREAM_INT_BANK1_START - DREAM_GPIO_BANK1_FIRST_INT_SOURCE + (n)))
+
+#define DREAM_INT_TO_BANK(n) ((n - DREAM_INT_START) / DREAM_INT_BANK0_COUNT)
+#define DREAM_INT_TO_MASK(n) (1U << ((n - DREAM_INT_START) & 7))
+#define DREAM_BANK_TO_MASK_REG(bank) \
+ (bank ? DREAM_GPIO_INT_MASK1_REG : DREAM_GPIO_INT_MASK0_REG)
+#define DREAM_BANK_TO_STAT_REG(bank) \
+ (bank ? DREAM_GPIO_INT_STAT1_REG : DREAM_GPIO_INT_STAT0_REG)
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
new file mode 100644
index 0000000..92ce18d
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/gpio.h
@@ -0,0 +1,36 @@
+/* linux/include/asm-arm/arch-msm/gpio.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_GPIO_H
+#define __ASM_ARCH_MSM_GPIO_H
+
+#include <linux/interrupt.h>
+
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+int gpio_to_irq(unsigned gpio);
+
+#include <asm-generic/gpio.h>
+
+extern int gpio_configure(unsigned int gpio, unsigned long flags);
+extern int gpio_read_detect_status(unsigned int gpio);
+extern int gpio_clear_detect_status(unsigned int gpio);
+
+#endif
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


\
 
 \ /
  Last update: 2009-12-11 23:15    [W:0.145 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site