Messages in this thread Patch in this message | | | Date | Mon, 9 Nov 2009 18:56:44 +0000 | Subject | Fix syntax of mdio.txt to match actual syntax. | From | (Lennart Sorensen) |
| |
The syntax in Documentation/powerpc/dts-bindings/gpio/mdio.txt is not up to date and no longer works. Fix this as well as actually show how to represent a PHY on the gpio-bitbang bus.
Tested with 2.6.31 on a RuggedCom RX5000 (mpc8360e based).
Signed-off-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
diff --git a/Documentation/powerpc/dts-bindings/gpio/mdio.txt b/Documentation/powerpc/dts-bindings/gpio/mdio.txt index bc95495..7a84f25 100644 --- a/Documentation/powerpc/dts-bindings/gpio/mdio.txt +++ b/Documentation/powerpc/dts-bindings/gpio/mdio.txt @@ -14,6 +14,15 @@ mdio { compatible = "virtual,mdio-gpio"; #address-cells = <1>; #size-cells = <0>; - gpios = <&qe_pio_a 11 - &qe_pio_c 6>; + gpios = <&qe_pio_a 11 0 + &qe_pio_c 6 0>; + + phy0: ethernet-phy@00 { + reg = <0x18>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@01 { + reg = <0x0f>; + device_type = "ethernet-phy"; + }; };
| |