lkml.org 
[lkml]   [2009]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 39/41] rt2x00: move REGISTER_BUSY_* definitions to rt2x00.h
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] rt2x00: move REGISTER_BUSY_* definitions to rt2x00.h

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00.h | 9 +++++++++
drivers/net/wireless/rt2x00/rt2x00pci.h | 9 ---------
drivers/net/wireless/rt2x00/rt2x00usb.h | 6 ------
3 files changed, 9 insertions(+), 15 deletions(-)

Index: b/drivers/net/wireless/rt2x00/rt2x00.h
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -857,6 +857,15 @@ struct rt2x00_dev {
};

/*
+ * Register defines.
+ * Some registers require multiple attempts before success,
+ * in those cases REGISTER_BUSY_COUNT attempts should be
+ * taken with a REGISTER_BUSY_DELAY interval.
+ */
+#define REGISTER_BUSY_COUNT 5
+#define REGISTER_BUSY_DELAY 100
+
+/*
* Generic RF access.
* The RF is being accessed by word index.
*/
Index: b/drivers/net/wireless/rt2x00/rt2x00pci.h
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -35,15 +35,6 @@
#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops)

/*
- * Register defines.
- * Some registers require multiple attempts before success,
- * in those cases REGISTER_BUSY_COUNT attempts should be
- * taken with a REGISTER_BUSY_DELAY interval.
- */
-#define REGISTER_BUSY_COUNT 5
-#define REGISTER_BUSY_DELAY 100
-
-/*
* Register access.
*/
static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
Index: b/drivers/net/wireless/rt2x00/rt2x00usb.h
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -39,17 +39,11 @@
#define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops)

/*
- * Register defines.
- * Some registers require multiple attempts before success,
- * in those cases REGISTER_BUSY_COUNT attempts should be
- * taken with a REGISTER_BUSY_DELAY interval.
* For USB vendor requests we need to pass a timeout
* time in ms, for this we use the REGISTER_TIMEOUT,
* however when loading firmware a higher value is
* required. In that case we use the REGISTER_TIMEOUT_FIRMWARE.
*/
-#define REGISTER_BUSY_COUNT 5
-#define REGISTER_BUSY_DELAY 100
#define REGISTER_TIMEOUT 500
#define REGISTER_TIMEOUT_FIRMWARE 1000


\
 
 \ /
  Last update: 2009-11-04 18:47    [W:0.267 / U:7.448 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site