lkml.org 
[lkml]   [2009]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: Always set prefetchable base/limit upper32 registers
Alex Williamson wrote:
> On Mon, 2009-11-30 at 13:36 -0800, Yinghai Lu wrote:
>> Alex Williamson wrote:
>>> Prior to 1f82de10 we always initialized the upper 32bits of the
>>> prefetchable memory window, regardless of the address range used.
>>> Now we only touch it for a >32bit address, which means the upper32
>>> registers remain whatever the BIOS initialized them too.
>>>
>>> It's valid for the BIOS to set the upper32 base/limit to
>>> 0xffffffff/0x00000000, which makes us program prefetchable ranges
>>> like 0xffffffffabc00000 - 0x00000000abc00000
>>>
>>> Revert the chunk of 1f82de10 that made this conditional so we always
>>> write the upper32 registers.
>>>
>>> Signed-off-by: Alex Williamson <alex.williamson@hp.com>
>>> ---
>>>
>>> drivers/pci/setup-bus.c | 8 +++-----
>>> 1 files changed, 3 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
>>> index cb1a027..127d759 100644
>>> --- a/drivers/pci/setup-bus.c
>>> +++ b/drivers/pci/setup-bus.c
>>> @@ -221,11 +221,9 @@ static void pci_setup_bridge(struct pci_bus *bus)
>>> }
>>> pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
>>>
>>> - if (pref_mem64) {
>>> - /* Set the upper 32 bits of PREF base & limit. */
>>> - pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
>>> - pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
>>> - }
>>> + /* Set the upper 32 bits of PREF base & limit. */
>>> + pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
>>> + pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
>>>
>>> pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
>>> }
>> when pref_mem64=0 it means that pref register is only 32 bit, we should not touch upper 32bits.
>
> Did you read my patch description? In that case bu = lu = 0 and we
> clear whatever state the BIOS left for those registers.

if HW state that reg is only 32bit pref, why should we care about the upper 32bit?

looks like that your bridge device need quirk to clear that so called upper 32bit for it.

YH


\
 
 \ /
  Last update: 2009-11-30 22:55    [W:0.056 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site