lkml.org 
[lkml]   [2009]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 1/3] at91: remove not needed depends on
    Date
    From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

    Those "depends on" are a double check as all machine entries are
    surrounded by "if <ARCH_xxx>" conditions.

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
    ---
    This patch series goes on top of previously posted patch named:
    "[PATCH] at91: at91sam9g20ek modify dual slot evaluation kit"
    http://lkml.org/lkml/2009/10/20/137
    It is relative to discussion led during the patch posting and also
    this one:
    "[RFC PATCH] atmel_lcdfb Kconfig: remove long dependency line"
    http://lkml.org/lkml/2009/6/23/292

    arch/arm/mach-at91/Kconfig | 32 --------------------------------
    1 files changed, 0 insertions(+), 32 deletions(-)

    diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
    index 2fd8843..4301c6b 100644
    --- a/arch/arm/mach-at91/Kconfig
    +++ b/arch/arm/mach-at91/Kconfig
    @@ -76,89 +76,76 @@ comment "AT91RM9200 Board Type"

    config MACH_ONEARM
    bool "Ajeco 1ARM Single Board Computer"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using Ajeco's 1ARM Single Board Computer.
    <http://www.ajeco.fi/products.htm>

    config ARCH_AT91RM9200DK
    bool "Atmel AT91RM9200-DK Development board"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using Atmel's AT91RM9200-DK Development board.
    (Discontinued)

    config MACH_AT91RM9200EK
    bool "Atmel AT91RM9200-EK Evaluation Kit"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
    <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>

    config MACH_CSB337
    bool "Cogent CSB337"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using Cogent's CSB337 board.
    <http://www.cogcomp.com/csb_csb337.htm>

    config MACH_CSB637
    bool "Cogent CSB637"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using Cogent's CSB637 board.
    <http://www.cogcomp.com/csb_csb637.htm>

    config MACH_CARMEVA
    bool "Conitec ARM&EVA"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using Conitec's AT91RM9200-MCU-Module.
    <http://www.conitec.net/english/linuxboard.htm>

    config MACH_ATEB9200
    bool "Embest ATEB9200"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using Embest's ATEB9200 board.
    <http://www.embedinfo.com/english/product/ATEB9200.asp>

    config MACH_KB9200
    bool "KwikByte KB920x"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using KwikByte's KB920x board.
    <http://kwikbyte.com/KB9202_description_new.htm>

    config MACH_PICOTUX2XX
    bool "picotux 200"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using a picotux 200.
    <http://www.picotux.com/>

    config MACH_KAFA
    bool "Sperry-Sun KAFA board"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using Sperry-Sun's KAFA board.

    config MACH_ECBAT91
    bool "emQbit ECB_AT91 SBC"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using emQbit's ECB_AT91 board.
    <http://wiki.emqbit.com/free-ecb-at91>

    config MACH_YL9200
    bool "ucDragon YL-9200"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using the ucDragon YL-9200 board.

    config MACH_CPUAT91
    bool "Eukrea CPUAT91"
    - depends on ARCH_AT91RM9200
    help
    Select this if you are using the Eukrea Electromatique's
    CPUAT91 board <http://www.eukrea.com/>.
    @@ -173,7 +160,6 @@ comment "AT91SAM9260 Variants"

    config ARCH_AT91SAM9260_SAM9XE
    bool "AT91SAM9XE"
    - depends on ARCH_AT91SAM9260
    help
    Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
    They are basically AT91SAM9260s with various sizes of embedded Flash.
    @@ -182,28 +168,24 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type"

    config MACH_AT91SAM9260EK
    bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
    - depends on ARCH_AT91SAM9260
    help
    Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
    <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>

    config MACH_CAM60
    bool "KwikByte KB9260 (CAM60) board"
    - depends on ARCH_AT91SAM9260
    help
    Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
    <http://www.kwikbyte.com/KB9260.html>

    config MACH_SAM9_L9260
    bool "Olimex SAM9-L9260 board"
    - depends on ARCH_AT91SAM9260
    help
    Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
    <http://www.olimex.com/dev/sam9-L9260.html>

    config MACH_AFEB9260
    bool "Custom afeb9260 board v1"
    - depends on ARCH_AT91SAM9260
    help
    Select this if you are using custom afeb9260 board based on
    open hardware design. Select this for revision 1 of the board.
    @@ -212,21 +194,18 @@ config MACH_AFEB9260

    config MACH_USB_A9260
    bool "CALAO USB-A9260"
    - depends on ARCH_AT91SAM9260
    help
    Select this if you are using a Calao Systems USB-A9260.
    <http://www.calao-systems.com>

    config MACH_QIL_A9260
    bool "CALAO QIL-A9260 board"
    - depends on ARCH_AT91SAM9260
    help
    Select this if you are using a Calao Systems QIL-A9260 Board.
    <http://www.calao-systems.com>

    config MACH_CPU9260
    bool "Eukrea CPU9260 board"
    - depends on ARCH_AT91SAM9260
    help
    Select this if you are using a Eukrea Electromatique's
    CPU9260 Board <http://www.eukrea.com/>
    @@ -241,7 +220,6 @@ comment "AT91SAM9261 Board Type"

    config MACH_AT91SAM9261EK
    bool "Atmel AT91SAM9261-EK Evaluation Kit"
    - depends on ARCH_AT91SAM9261
    help
    Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
    <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
    @@ -256,7 +234,6 @@ comment "AT91SAM9G10 Board Type"

    config MACH_AT91SAM9G10EK
    bool "Atmel AT91SAM9G10-EK Evaluation Kit"
    - depends on ARCH_AT91SAM9G10
    help
    Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
    <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
    @@ -271,21 +248,18 @@ comment "AT91SAM9263 Board Type"

    config MACH_AT91SAM9263EK
    bool "Atmel AT91SAM9263-EK Evaluation Kit"
    - depends on ARCH_AT91SAM9263
    help
    Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
    <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>

    config MACH_USB_A9263
    bool "CALAO USB-A9263"
    - depends on ARCH_AT91SAM9263
    help
    Select this if you are using a Calao Systems USB-A9263.
    <http://www.calao-systems.com>

    config MACH_NEOCORE926
    bool "Adeneo NEOCORE926"
    - depends on ARCH_AT91SAM9263
    help
    Select this if you are using the Adeneo Neocore 926 board.

    @@ -299,7 +273,6 @@ comment "AT91SAM9RL Board Type"

    config MACH_AT91SAM9RLEK
    bool "Atmel AT91SAM9RL-EK Evaluation Kit"
    - depends on ARCH_AT91SAM9RL
    help
    Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.

    @@ -313,14 +286,12 @@ comment "AT91SAM9G20 Board Type"

    config MACH_AT91SAM9G20EK
    bool "Atmel AT91SAM9G20-EK Evaluation Kit"
    - depends on ARCH_AT91SAM9G20
    help
    Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
    that embeds only one SD/MMC slot.

    config MACH_AT91SAM9G20EK_2MMC
    bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
    - depends on ARCH_AT91SAM9G20
    help
    Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
    with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
    @@ -328,7 +299,6 @@ config MACH_AT91SAM9G20EK_2MMC

    config MACH_CPU9G20
    bool "Eukrea CPU9G20 board"
    - depends on ARCH_AT91SAM9G20
    help
    Select this if you are using a Eukrea Electromatique's
    CPU9G20 Board <http://www.eukrea.com/>
    @@ -343,7 +313,6 @@ comment "AT91SAM9G45 Board Type"

    config MACH_AT91SAM9G45EKES
    bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
    - depends on ARCH_AT91SAM9G45
    help
    Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
    "ES" at the end of the name means that this board is an
    @@ -359,7 +328,6 @@ comment "AT91CAP9 Board Type"

    config MACH_AT91CAP9ADK
    bool "Atmel AT91CAP9A-DK Evaluation Kit"
    - depends on ARCH_AT91CAP9
    help
    Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
    <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
    --
    1.5.6.5


    \
     
     \ /
      Last update: 2009-11-03 16:29    [W:0.041 / U:0.276 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site