lkml.org 
[lkml]   [2009]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] pci: release that leaf bridge' resource that is not big -v11
Yinghai wrote:
>
>
>
>
> On Nov 25, 2009, at 10:43 PM, Kenji Kaneshige
> <kaneshige.kenji@jp.fujitsu.com> wrote:
>
>> Yinghai Lu wrote:
>>> Kenji Kaneshige wrote:
>>>> Hi Yinghai,
>>>>
>>>> I would like to reconfirm what is the problem you're trying to solve
>>>> before reviewing and testing the additional patch. To be honest, your
>>>> patch looks more and more complicated and it is becoming difficult
>>>> for me to review and test it.
>>> the real problem:
>>> 1. boot time:
>>> BIOS separate IO range between several IOHs, and on some slots, BIOS
>>> assign the resource to the bridge, but stop
>>> assigning resource to the device under that bridge, because the
>>> device need big resource.
>>> so patch1 is trying to a. pci assign unassign and record the failed
>>> device resource.
>>> b. clear the BIOS assigned resource of the parent bridge of fail device
>>> c. go back and call pci assign unsigned
>>> d. if it still fail, will go up more bridges. and clear and try again.
>>> 2. hotplug:
>>> BIOS separate IO range between several IOHs, and on some slots, BIOS
>>> assign the resource to every bridge. (8M)
>>> but when insert one card that big resource, the card can not get
>>> resource. because kernel will not touch the bridge resource.
>>> so patch2 is trying to
>>> a. assign resource to devices with that slot. and record fail devices
>>> b. if there is some failed, will clear sepcifically io port of
>>> bridge, or mmio of bridge, or mmio pref of bridge.
>>> c. try to assign the parent bridge of the slot.
>>> so it will keep original assigned resource by BIOS if possible.
>>> and you have tested patch1 and patch2 in V11, but said patch1 may
>>> have shrinking resource problem.
>>> the patch3 is addressing the patch1 that could shrinking resource for
>>> non-pcie hotplug bridge...
>>>
>>
>> Thank you for the explanation. The patch3 seems to solve my concern.
>>
>> Your patch only touch the leaf bridge at the 2nd try of resource
>> assignment. IIRC, this behavior is to prevent from shrinking bridge
>> resources. Am I correct? I'm not sure but I think we don't need this
>> behavior because now that we have another mechanism to prevent
>> from shrinking bridge resource.
>>>>
>
> Third patch will only try to increase the bridge res
>
> Try num still default to 5 , it could help other case
>
> Can you send me whole bootlog ?
>

Bad news...

My system doesn't boot (hangup) with your latest set of patches.
Fusion MPT SAS driver initialization failed on some devices.
Please see below

...
Fusion MPT SAS Host driver 3.04.12
mptsas 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
mptsas 0000:09:00.0: BAR 1: can't reserve [mem 0x00510000-0x00513fff 64bit]
mptbase: ioc0: ERROR - pci_request_selected_regions() with MEM failed
mptsas 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
mptsas 0000:0a:00.0: BAR 1: can't reserve [mem 0x00610000-0x00613fff 64bit]
mptbase: ioc1: ERROR - pci_request_selected_regions() with MEM failed
...


This problem disappear when I revert the patch 6/9, and my system
can boot. But I found igb driver initialization failed on some
devices even in this case. Please see below

...
igb 0000:08:00.0: BAR 0: can't reserve [mem 0x00100000-0x0011ffff]
igb 0000:08:00.0: PCI INT A disabled
igb: probe of 0000:08:00.0 failed with error -16
igb 0000:08:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
igb 0000:08:00.1: BAR 0: can't reserve [mem 0x00140000-0x0015ffff]
igb 0000:08:00.1: PCI INT B disabled
igb: probe of 0000:08:00.1 failed with error -16
...

I'll send the whole boot log in both cases privately later.

Thanks,
Kenji Kaneshige



\
 
 \ /
  Last update: 2009-11-27 08:15    [W:0.169 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site