lkml.org 
[lkml]   [2009]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 1/1] Add all TWL4030 regulators to Regulator framework
    ext Mark Brown wrote:
    > On Wed, Nov 18, 2009 at 04:36:09PM +0200, Eduardo Valentin wrote:
    >
    >> But maybe these VINT* should be set as always_on in twl4030-regulator driver?
    >
    > Can they support any external load at all? If not then it would make
    > sense for the chip driver to at least provide a default set of
    > constraints for them rather than forcing all the machine drivers to do
    > it manually.

    From the TRM it appears that the max current output values are as follows

    VINTANA1 - 30mA
    VINTANA2 - 250mA
    VINTDIG - 100mA

    Theoretically they may be able to support external load depending on your machine configuration but still I think providing constraints for them in
    the chip driver could be a good idea since the "always-on" limitation is imposed by the chip and not the machine. Without these three supplies the TWL
    does not function properly, if at all. Also worth noting is that the current implementation of RegulatorFW doesn't appear to be able to turn these
    supplies off (comparing TWL register content with framework status).


    \
     
     \ /
      Last update: 2009-11-19 08:07    [W:0.038 / U:29.744 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site