lkml.org 
[lkml]   [2009]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/13] Blackfin: bf533-ezkit: convert to physmap/jedec_probe
Date
Now that the common jedec_probe supports the ST PSD4256G6V, no need to
use the custom stm_flash driver.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/mach-bf533/boards/ezkit.c | 66 +++++++++++++++++++------------
1 files changed, 41 insertions(+), 25 deletions(-)
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 9ffcd63..986fcdc 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -11,6 +11,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -71,54 +72,69 @@ static struct platform_device smc91x_device = {
};
#endif

-#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
-static const char *map_probes[] = {
- "stm_flash",
- NULL,
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions_a[] = {
+ {
+ .name = "bootloader(nor a)",
+ .size = 0x40000,
+ .offset = 0,
+ }, {
+ .name = "linux kernel(nor a)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
};

-static struct platdata_mtd_ram stm_pri_data_a = {
- .mapname = "Flash A Primary",
- .map_probes = map_probes,
- .bankwidth = 2,
+static struct physmap_flash_data ezkit_flash_data_a = {
+ .width = 2,
+ .parts = ezkit_partitions_a,
+ .nr_parts = ARRAY_SIZE(ezkit_partitions_a),
};

-static struct resource stm_pri_resource_a = {
+static struct resource ezkit_flash_resource_a = {
.start = 0x20000000,
.end = 0x200fffff,
.flags = IORESOURCE_MEM,
};

-static struct platform_device stm_pri_device_a = {
- .name = "mtd-ram",
+static struct platform_device ezkit_flash_device_a = {
+ .name = "physmap-flash",
.id = 0,
.dev = {
- .platform_data = &stm_pri_data_a,
+ .platform_data = &ezkit_flash_data_a,
},
.num_resources = 1,
- .resource = &stm_pri_resource_a,
+ .resource = &ezkit_flash_resource_a,
+};
+
+static struct mtd_partition ezkit_partitions_b[] = {
+ {
+ .name = "file system(nor b)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
};

-static struct platdata_mtd_ram stm_pri_data_b = {
- .mapname = "Flash B Primary",
- .map_probes = map_probes,
- .bankwidth = 2,
+static struct physmap_flash_data ezkit_flash_data_b = {
+ .width = 2,
+ .parts = ezkit_partitions_b,
+ .nr_parts = ARRAY_SIZE(ezkit_partitions_b),
};

-static struct resource stm_pri_resource_b = {
+static struct resource ezkit_flash_resource_b = {
.start = 0x20100000,
.end = 0x201fffff,
.flags = IORESOURCE_MEM,
};

-static struct platform_device stm_pri_device_b = {
- .name = "mtd-ram",
+static struct platform_device ezkit_flash_device_b = {
+ .name = "physmap-flash",
.id = 4,
.dev = {
- .platform_data = &stm_pri_data_b,
+ .platform_data = &ezkit_flash_data_b,
},
.num_resources = 1,
- .resource = &stm_pri_resource_b,
+ .resource = &ezkit_flash_resource_b,
};
#endif

@@ -445,9 +461,9 @@ static struct platform_device *ezkit_devices[] __initdata = {

&bfin_dpmc,

-#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
- &stm_pri_device_a,
- &stm_pri_device_b,
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+ &ezkit_flash_device_a,
+ &ezkit_flash_device_b,
#endif

#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
--
1.6.5.rc2


\
 
 \ /
  Last update: 2009-10-08 08:17    [from the cache]
©2003-2011 Jasper Spaans