lkml.org 
[lkml]   [2009]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 06/11] gigaset: improve error recovery
    Date
    When the Gigaset base stops responding, try resetting the USB
    connection to recover.

    Impact: error handling improvement
    Signed-off-by: Tilman Schmidt <tilman@imap.cc>
    ---
    drivers/isdn/gigaset/bas-gigaset.c | 69 +++++++++++++++++++++++------------
    1 files changed, 45 insertions(+), 24 deletions(-)

    diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
    index 9e7108a..5ed1d99 100644
    --- a/drivers/isdn/gigaset/bas-gigaset.c
    +++ b/drivers/isdn/gigaset/bas-gigaset.c
    @@ -134,6 +134,7 @@ struct bas_cardstate {
    #define BS_ATRDPEND 0x040 /* urb_cmd_in in use */
    #define BS_ATWRPEND 0x080 /* urb_cmd_out in use */
    #define BS_SUSPEND 0x100 /* USB port suspended */
    +#define BS_RESETTING 0x200 /* waiting for HD_RESET_INTERRUPT_PIPE_ACK */


    static struct gigaset_driver *driver = NULL;
    @@ -319,6 +320,21 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
    return -EINVAL;
    }

    +/* set/clear bits in base connection state, return previous state
    + */
    +static inline int update_basstate(struct bas_cardstate *ucs,
    + int set, int clear)
    +{
    + unsigned long flags;
    + int state;
    +
    + spin_lock_irqsave(&ucs->lock, flags);
    + state = ucs->basstate;
    + ucs->basstate = (state & ~clear) | set;
    + spin_unlock_irqrestore(&ucs->lock, flags);
    + return state;
    +}
    +
    /* error_hangup
    * hang up any existing connection because of an unrecoverable error
    * This function may be called from any context and takes care of scheduling
    @@ -350,12 +366,9 @@ static inline void error_hangup(struct bc_state *bcs)
    */
    static inline void error_reset(struct cardstate *cs)
    {
    - /* close AT command channel to recover (ignore errors) */
    - req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT);
    -
    - //FIXME try to recover without bothering the user
    - dev_err(cs->dev,
    - "unrecoverable error - please disconnect Gigaset base to reset\n");
    + /* reset interrupt pipe to recover (ignore errors) */
    + update_basstate(cs->hw.bas, BS_RESETTING, 0);
    + req_submit(cs->bcs, HD_RESET_INTERRUPT_PIPE, 0, BAS_TIMEOUT);
    }

    /* check_pending
    @@ -398,8 +411,13 @@ static void check_pending(struct bas_cardstate *ucs)
    case HD_DEVICE_INIT_ACK: /* no reply expected */
    ucs->pending = 0;
    break;
    - /* HD_READ_ATMESSAGE, HD_WRITE_ATMESSAGE, HD_RESET_INTERRUPTPIPE
    - * are handled separately and should never end up here
    + case HD_RESET_INTERRUPT_PIPE:
    + if (!(ucs->basstate & BS_RESETTING))
    + ucs->pending = 0;
    + break;
    + /*
    + * HD_READ_ATMESSAGE and HD_WRITE_ATMESSAGE are handled separately
    + * and should never end up here
    */
    default:
    dev_warn(&ucs->interface->dev,
    @@ -449,21 +467,6 @@ static void cmd_in_timeout(unsigned long data)
    error_reset(cs);
    }

    -/* set/clear bits in base connection state, return previous state
    - */
    -inline static int update_basstate(struct bas_cardstate *ucs,
    - int set, int clear)
    -{
    - unsigned long flags;
    - int state;
    -
    - spin_lock_irqsave(&ucs->lock, flags);
    - state = ucs->basstate;
    - ucs->basstate = (state & ~clear) | set;
    - spin_unlock_irqrestore(&ucs->lock, flags);
    - return state;
    -}
    -
    /* read_ctrl_callback
    * USB completion handler for control pipe input
    * called by the USB subsystem in interrupt context
    @@ -762,7 +765,8 @@ static void read_int_callback(struct urb *urb)
    break;

    case HD_RESET_INTERRUPT_PIPE_ACK:
    - gig_dbg(DEBUG_USBREQ, "HD_RESET_INTERRUPT_PIPE_ACK");
    + update_basstate(ucs, 0, BS_RESETTING);
    + dev_notice(cs->dev, "interrupt pipe reset\n");
    break;

    case HD_SUSPEND_END:
    @@ -1429,6 +1433,7 @@ static void req_timeout(unsigned long data)

    case HD_CLOSE_ATCHANNEL:
    dev_err(bcs->cs->dev, "timeout closing AT channel\n");
    + error_reset(bcs->cs);
    break;

    case HD_CLOSE_B2CHANNEL:
    @@ -1438,6 +1443,13 @@ static void req_timeout(unsigned long data)
    error_reset(bcs->cs);
    break;

    + case HD_RESET_INTERRUPT_PIPE:
    + /* error recovery escalation */
    + dev_err(bcs->cs->dev,
    + "reset interrupt pipe timeout, attempting USB reset\n");
    + usb_queue_reset_device(bcs->cs->hw.bas->interface);
    + break;
    +
    default:
    dev_warn(bcs->cs->dev, "request 0x%02x timed out, clearing\n",
    pending);
    @@ -1930,6 +1942,15 @@ static int gigaset_write_cmd(struct cardstate *cs,
    goto notqueued;
    }

    + /* translate "+++" escape sequence sent as a single separate command
    + * into "close AT channel" command for error recovery
    + * The next command will reopen the AT channel automatically.
    + */
    + if (len == 3 && !memcmp(buf, "+++", 3)) {
    + rc = req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT);
    + goto notqueued;
    + }
    +
    if (len > IF_WRITEBUF)
    len = IF_WRITEBUF;
    if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
    --
    1.6.2.1.214.ge986c


    \
     
     \ /
      Last update: 2009-10-07 00:41    [W:3.297 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site