lkml.org 
[lkml]   [2009]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/4] KVM: introduce "xinterface" API for external interaction with guests
Avi Kivity wrote:
> On 10/02/2009 10:19 PM, Gregory Haskins wrote:
>> What: xinterface is a mechanism that allows kernel modules external to
>> the kvm.ko proper to interface with a running guest. It accomplishes
>> this by creating an abstracted interface which does not expose any
>> private details of the guest or its related KVM structures, and provides
>> a mechanism to find and bind to this interface at run-time.
>>
>
> If this is needed, it should be done as a virt_address_space to which
> kvm and other modules bind, instead of as something that kvm exports and
> other modules import. The virt_address_space can be identified by an fd
> and passed around to kvm and other modules.

IIUC, what you are proposing is something similar to generalizing the
vbus::memctx object. I had considered doing something like that in the
early design phase of vbus, but then decided it would be a hard-sell to
the mm crowd, and difficult to generalize.

What do you propose as the interface to program the object?

>
>> Why: There are various subsystems that would like to interact with a KVM
>> guest which are ideally suited to exist outside the domain of the kvm.ko
>> core logic. For instance, external pci-passthrough, virtual-bus, and
>> virtio-net modules are currently under development. In order for these
>> modules to successfully interact with the guest, they need, at the very
>> least, various interfaces for signaling IO events, pointer translation,
>> and possibly memory mapping.
>>
>> The signaling case is covered by the recent introduction of the
>> irqfd/ioeventfd mechanisms. This patch provides a mechanism to cover the
>> other cases. Note that today we only expose pointer-translation related
>> functions, but more could be added at a future date as needs arise.
>>
>> Example usage: QEMU instantiates a guest, and an external module "foo"
>> that desires the ability to interface with the guest (say via
>> open("/dev/foo")). QEMU may then pass the kvmfd to foo via an
>> ioctl, such as: ioctl(foofd, FOO_SET_VMID,&kvmfd). Upon receipt, the
>> foo module can issue kvm_xinterface_bind(kvmfd) to acquire
>> the proper context. Internally, the struct kvm* and associated
>> struct module* will remain pinned at least until the foo module calls
>> kvm_xinterface_put().
>>
>>
>
> So, under my suggestion above, you'd call
> sys_create_virt_address_space(), populate it, and pass the result to kvm
> and to foo. This allows the use of virt_address_space without kvm and
> doesn't require foo to interact with kvm.

The problem I see here is that the only way I can think to implement
this generally is something that looks very kvm-esque (slots-to-pages
kind of translation). Is there a way you can think of that does not
involve a kvm.ko originated vtable that is also not kvm centric?

>
>> +struct kvm_xinterface_ops {
>> + unsigned long (*copy_to)(struct kvm_xinterface *intf,
>> + unsigned long gpa, const void *src,
>> + unsigned long len);
>> + unsigned long (*copy_from)(struct kvm_xinterface *intf, void *dst,
>> + unsigned long gpa, unsigned long len);
>> + struct kvm_xvmap* (*vmap)(struct kvm_xinterface *intf,
>> + unsigned long gpa,
>> + unsigned long len);
>>
>
> How would vmap() work with live migration?

vmap represents shmem regions, and is a per-guest-instance resource. So
my plan there is that the new and old guest instance would each have the
vmap region instated at the same GPA location (assumption: gpas are
stable across migration), and any state relevant data local to the shmem
(like ring head/tail position) is conveyed in the serialized stream for
the device model.

>
>> +
>> +static inline void
>> +_kvm_xinterface_release(struct kref *kref)
>> +{
>> + struct kvm_xinterface *intf;
>> + struct module *owner;
>> +
>> + intf = container_of(kref, struct kvm_xinterface, kref);
>> +
>> + owner = intf->owner;
>> + rmb();
>>
>
> Why rmb?

the intf->ops->release() line may invalidate the intf pointer, so we
want to ensure that the read completes before the release() is called.

TBH: I'm not 100% its needed, but I was being conservative.

>
>> +
>> + intf->ops->release(intf);
>> + module_put(owner);
>> +}
>> +
>>
>> +
>> +/*
>> + * gpa_to_hva() - translate a guest-physical to host-virtual using
>> + * a per-cpu cache of the memslot.
>> + *
>> + * The gfn_to_memslot() call is relatively expensive, and the gpa access
>> + * patterns exhibit a high degree of locality. Therefore, lets cache
>> + * the last slot used on a per-cpu basis to optimize the lookup
>> + *
>> + * assumes slots_lock held for read
>> + */
>> +static unsigned long
>> +gpa_to_hva(struct _xinterface *_intf, unsigned long gpa)
>> +{
>> + int cpu = get_cpu();
>> + unsigned long gfn = gpa>> PAGE_SHIFT;
>> + struct kvm_memory_slot *memslot = _intf->slotcache[cpu];
>> + unsigned long addr = 0;
>> +
>> + if (!memslot
>> + || gfn< memslot->base_gfn
>> + || gfn>= memslot->base_gfn + memslot->npages) {
>> +
>> + memslot = gfn_to_memslot(_intf->kvm, gfn);
>> + if (!memslot)
>> + goto out;
>> +
>> + _intf->slotcache[cpu] = memslot;
>> + }
>> +
>> + addr = _gfn_to_hva(gfn, memslot) + offset_in_page(gpa);
>> +
>> +out:
>> + put_cpu();
>> +
>> + return addr;
>> +}
>>
>
>
> A simple per-vcpu cache (in struct kvm_vcpu) is likely to give better
> results.

per-vcpu will not work well here, unfortunately, since this is an
external interface mechanism. The callers will generally be from a
kthread or some other non-vcpu related context. Even if we could figure
out a vcpu to use as a basis, we would require some kind of
heavier-weight synchronization which would not be as desirable.

Therefore, I opted to go per-cpu and use the presumably lighterweight
get_cpu/put_cpu() instead.


>
>> +static unsigned long
>> +xinterface_copy_to(struct kvm_xinterface *intf, unsigned long gpa,
>> + const void *src, unsigned long n)
>> +{
>> + struct _xinterface *_intf = to_intf(intf);
>> + unsigned long dst;
>> + bool kthread = !current->mm;
>> +
>> + down_read(&_intf->kvm->slots_lock);
>> +
>> + dst = gpa_to_hva(_intf, gpa);
>> + if (!dst)
>> + goto out;
>> +
>> + if (kthread)
>> + use_mm(_intf->mm);
>> +
>> + if (kthread || _intf->mm == current->mm)
>> + n = copy_to_user((void *)dst, src, n);
>> + else
>> + n = _slow_copy_to_user(_intf, dst, src, n);
>>
>
> Can't you switch the mm temporarily instead of this?

Thats actually what I do for the fast-path (use_mm() does a switch_to()
internally).

The slow-path is only there for completeness for when switching is not
possible (such as if called with an mm already active i.e.
process-context). In practice, however, this doesnt happen. Virtually
100% of the calls in vbus hit the fast-path here, and I suspect most
xinterface clients would find the same conditions as well.

Thanks Avi,
-Greg

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2009-10-06 02:01    [W:0.071 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site