Messages in this thread | | | Date | Mon, 05 Oct 2009 20:42:16 +0400 | From | Michael Tokarev <> | Subject | Re: [lm-sensors] it87 sensors need an ACPI driver (2.6.31) |
| |
Luca Tettamanti wrote: [] >> Vanilla Kernel 2.6.31.1 fails to load it87 on my machine with the same >> messages as posted above. [] >> In addition, asus_atk0110 loads but leaves no trace in dmesg when loaded. > > That's good ;-) The driver is quiet when everything is ok. You should > see the corresponding entries under /sys/class/hwmon/hwmonN; upgrade > lm-sensor package to version 3.1.1, older versions do not support ACPI > devices. > >> Motherboard is an Asus M2N32-WS. DSDT attached. > > From a quick glance it should work. If it doesn't enable > CONFIG_HWMON_DEBUG_CHIP.
Well, I just tried it here and it works here too, on 3 different asus motherboards. But asus_atk0110 is far less useful than the it87 variant. Yes atk0110 shows correct labels for various sensors, but for one there's no way to control fan speeds using it, at least not currently, -- something which is done by it87 easily.
Well, one more difference is that atk0110 also shows vcore, which at least looks real instead of fake 1.55V as shown by it87.
But anyway, loading the driver just to get correct labels and vcore seems a bit overkill...
/mjt
| |