lkml.org 
[lkml]   [2009]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] pci: pciehp update the slot bridge res to get big range for pcie devices
Yinghai Lu wrote:
> Yinghai Lu wrote:
>> Kenji Kaneshige wrote:
>>> I understand you need to touch I/O base/limit and Mem base/limit. But
>>> I don't understand why you also need to update bridge's BARs. Could
>>> you please explain a little more about it?
>>>
>>> Just in case, my terminology "bridge's BARs" is Base Address Register
>>> 0 (offset 0x10) and Base Address Register 1 (offset 0x14) in the
>>> (type 1) configuration space header of the bridge.
>> i mean 0x1c, 0x20, 0x28
>>
>> did not notice that bridge device's 0x10, 0x14 are used...
>> if port service need to use 0x10, 0x14, and the device is enabled, we should touch 0x10, and 0x14.
>
> after check the code, if
>
> pci_bridge_assign_resources ==> pdev_assign_resources_sorted ==> pdev_sort_resources
>
> will not touch 0x10 and 0x14, if those resource is claimed by port service.
>
> /* Sort resources by alignment */
> void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head)
> {
> int i;
>
> for (i = 0; i < PCI_NUM_RESOURCES; i++) {
> struct resource *r;
> struct resource_list *list, *tmp;
> resource_size_t r_align;
>
> r = &dev->resource[i];
>
> if (r->flags & IORESOURCE_PCI_FIXED)
> continue;
>
> if (!(r->flags) || r->parent)
> continue;
>
>
> r->parent != NULL, will make it skip those two.
>
> So -v3 should be safe.
>

Thank you for the clarification.

But I still don't understand the whole picture of your set of
changes. Let me ask some questions.

In my understanding of your set of changes, if there is a PCIe
switch with some hot-plug slots and all of those slots are empty,
I/O and Memory resources assigned by BIOS are all released at
the boot time. For example, suppose the following case.

bridge(A)
|
-----------------------
| |
bridge(B) bridge(C)
| |
slot(1) slot(2)
(empty) (empty)
bridge(A): P2P bridge for switch upstream port
bridge(B): P2P bridge for switch downstream port
bridge(C): P2P bridge for switch downstream port

In the above example, I/O and Mem resource assigned to bridge(A),
bridge(B) and bridge(C) are all released at the boot time. Correct?

Then, when a adapter card is hot-added to slot(1), I/O and Mem
resources enough for enabling the hot-added adapter card is assigned
to bridge(A), bridge(B) and the adapter card. Correct?

Then, when an another adpater card is hot-added to slot(2), we
need to assign enough resource to bridge(C) and the new card.
But bridge(A) doesn't have enough resource for bridge(C) and
the new card. In addition, all bridge(A) and bridge(B) and the
adapter card on slot(1) are already working. How do you assign
resource to bridge(C) and the card on slot(2)?

Thanks,
Kenji Kaneshige






\
 
 \ /
  Last update: 2009-10-28 09:35    [from the cache]
©2003-2011 Jasper Spaans