lkml.org 
[lkml]   [2009]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH -v4 9/9] tracing: add function graph tracer support for MIPS
From
Date
On Wed, 2009-10-21 at 22:35 +0800, Wu Zhangjin wrote:
> The implementation of function graph tracer for MIPS is a little
> different from X86.
>
> in MIPS, gcc(with -pg) only transfer the caller's return address(at) and
> the _mcount's return address(ra) to us.
>
> move at, ra
> jal _mcount
>
> in the function is a leaf, it will no save the return address(ra):
>
> ffffffff80101298 <au1k_wait>:
> ffffffff80101298: 67bdfff0 daddiu sp,sp,-16
> ffffffff8010129c: ffbe0008 sd s8,8(sp)
> ffffffff801012a0: 03a0f02d move s8,sp
> ffffffff801012a4: 03e0082d move at,ra
> ffffffff801012a8: 0c042930 jal ffffffff8010a4c0 <_mcount>
> ffffffff801012ac: 00020021 nop
>
> so, we can hijack it directly in _mcount, but if the function is non-leaf, the
> return address is saved in the stack.
>
> ffffffff80133030 <copy_process>:
> ffffffff80133030: 67bdff50 daddiu sp,sp,-176
> ffffffff80133034: ffbe00a0 sd s8,160(sp)
> ffffffff80133038: 03a0f02d move s8,sp
> ffffffff8013303c: ffbf00a8 sd ra,168(sp)
> ffffffff80133040: ffb70098 sd s7,152(sp)
> ffffffff80133044: ffb60090 sd s6,144(sp)
> ffffffff80133048: ffb50088 sd s5,136(sp)
> ffffffff8013304c: ffb40080 sd s4,128(sp)
> ffffffff80133050: ffb30078 sd s3,120(sp)
> ffffffff80133054: ffb20070 sd s2,112(sp)
> ffffffff80133058: ffb10068 sd s1,104(sp)
> ffffffff8013305c: ffb00060 sd s0,96(sp)
> ffffffff80133060: 03e0082d move at,ra
> ffffffff80133064: 0c042930 jal ffffffff8010a4c0 <_mcount>
> ffffffff80133068: 00020021 nop
>
> but we can not get the exact stack address(which saved ra) directly in
> _mcount, we need to search the content of at register in the stack space
> or search the "s{d,w} ra, offset(sp)" instruction in the text. 'Cause we
> can not prove there is only a match in the stack space, so, we search
> the text instead.
>
> as we can see, if the first instruction above "move at, ra" is "move s8,
> sp"(move fp, sp), it is a leaf function, so we hijack the at register

Are you sure it will always be the first instruction for leaf registers.
You may want to search for that instruction and stop on it. If you have
not yet found the storage of ra in the stack, then you know it is a leaf
function.

> directly via put &return_to_handler into it, and otherwise, we search
> the "s{d,w} ra, offset(sp)" instruction to get the stack offset, and
> then the stack address. we use the above copy_process() as an example,
> we at last find "ffbf00a8", 0xa8 is the stack offset, we plus it with
> s8(fp), that is the stack address, we hijack the content via writing the
> &return_to_handler in.
>
> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
> ---
> arch/mips/Kconfig | 1 +
> arch/mips/kernel/ftrace.c | 192 ++++++++++++++++++++++++++++++++++++++++
> arch/mips/kernel/mcount.S | 55 +++++++++++-
> arch/mips/kernel/vmlinux.lds.S | 1 +
> 4 files changed, 248 insertions(+), 1 deletions(-)
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 147fbbc..de690fd 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -8,6 +8,7 @@ config MIPS
> select HAVE_FUNCTION_TRACE_MCOUNT_TEST
> select HAVE_DYNAMIC_FTRACE
> select HAVE_FTRACE_MCOUNT_RECORD
> + select HAVE_FUNCTION_GRAPH_TRACER
> # Horrible source of confusion. Die, die, die ...
> select EMBEDDED
> select RTC_LIB if !LEMOTE_FULOONG2E
> diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
> index 1e44865..fddee5b 100644
> --- a/arch/mips/kernel/ftrace.c
> +++ b/arch/mips/kernel/ftrace.c
> @@ -13,6 +13,8 @@
> #include <linux/ftrace.h>
>
> #include <asm/cacheflush.h>
> +#include <asm/asm.h>
> +#include <asm/asm-offsets.h>
>
> #ifdef CONFIG_DYNAMIC_FTRACE
>
> @@ -105,3 +107,193 @@ int __init ftrace_dyn_arch_init(void *data)
> return 0;
> }
> #endif /* CONFIG_DYNAMIC_FTRACE */
> +
> +#ifdef CONFIG_FUNCTION_GRAPH_TRACER
> +
> +#ifdef CONFIG_DYNAMIC_FTRACE
> +
> +#define JMP 0x08000000 /* jump to target directly */
> +extern void ftrace_graph_call(void);
> +
> +int ftrace_enable_ftrace_graph_caller(void)
> +{
> + unsigned long ip = (unsigned long)(&ftrace_graph_call);
> + unsigned char old[MCOUNT_INSN_SIZE], *new;
> + int ret;
> +
> + /* j ftrace_stub */
> + memcpy(old, (unsigned long *)ip, MCOUNT_INSN_SIZE);
> + new = ftrace_call_replace(JMP, (unsigned long)ftrace_graph_caller);
> +
> + ret = ftrace_modify_code(ip, old, new);
> +
> + return ret;
> +}
> +
> +int ftrace_disable_ftrace_graph_caller(void)
> +{
> + unsigned long ip = (unsigned long)(&ftrace_graph_call);
> + unsigned char old[MCOUNT_INSN_SIZE], *new;
> + int ret;
> +
> + /* j ftrace_graph_caller */
> + memcpy(old, (unsigned long *)ip, MCOUNT_INSN_SIZE);
> + new = ftrace_call_replace(JMP, (unsigned long)ftrace_stub);
> +
> + ret = ftrace_modify_code(ip, old, new);
> +
> + return ret;
> +}
> +
> +#endif /* !CONFIG_DYNAMIC_FTRACE */
> +
> +#define S_RA (0x2fbf << 16) /* 32bit: afbf, 64bit: ffbf */
> +/* This is only available when enabled -fno-omit-frame-pointer with CONFIG_FRAME_POINTER=y */
> +#define MOV_FP_SP 0x03a0f021 /* 32bit: 0x03a0f021, 64bit: 0x03a0f02d */
> +#define STACK_OFFSET_MASK 0xfff /* stack offset range: 0 ~ PT_SIZE(304) */
> +
> +unsigned long ftrace_get_parent_addr(unsigned long self_addr,
> + unsigned long parent,
> + unsigned long parent_addr,
> + unsigned long fp)
> +{
> + unsigned long sp, ip, ra;
> + unsigned int code;
> +
> + /* move to the instruction "move ra, at" */
> + ip = self_addr - 8;
> +
> + /* search the text until finding the "move s8, sp" instruction or
> + * "s{d,w} ra, offset(sp)" instruction */
> + do {
> + ip -= 4;
> + /* read the text we want to match */
> + if (probe_kernel_read(&code, (void *)ip, 4)) {

I thought you had issues with using probe_kernel_read here?

> + WARN_ON(1);
> + panic("read the text failure\n");
> + }
> +
> + /* if the first instruction above "move at, ra" is "move
> + * s8(fp), sp", means the function is a leaf */

Ah, the comment is incorrect. We do search for the move and stop there.
So it is not the first instruction. The comment should read...

If we hit the "move s8(fp), sp" instruction before finding where the
ra is stored, then this is a leaf function and it does not store the
ra on the stack.


> + if ((code & MOV_FP_SP) == MOV_FP_SP)
> + return parent_addr;
> + } while (((code & S_RA) != S_RA));
> +
> + sp = fp + (code & STACK_OFFSET_MASK);
> + ra = *(unsigned long *)sp;
> +
> + if (ra == parent)
> + return sp;
> + else
> + panic
> + ("failed on getting stack address of ra\n: addr: 0x%lx, code: 0x%x\n",
> + ip, code);

I would not panic. I would disable the tracing, and not do the change.
The code should work regardless.

> +}
> +
> +/*
> + * Hook the return address and push it in the stack of return addrs
> + * in current thread info.
> + */
> +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
> + unsigned long fp)
> +{
> + unsigned long old;
> + int faulted;
> + struct ftrace_graph_ent trace;
> + unsigned long return_hooker = (unsigned long)
> + &return_to_handler;
> +
> + /*
> + * Protect against fault, even if it shouldn't
> + * happen. This tool is too much intrusive to
> + * ignore such a protection.
> + *
> + * old = *parent;
> + */
> + asm volatile (
> + "1: " STR(PTR_L) " %[old], 0(%[parent])\n"
> + " li %[faulted], 0\n"
> + "2:\n"
> +
> + ".section .fixup, \"ax\"\n"
> + "3: li %[faulted], 1\n"
> + " j 2b\n"
> + ".previous\n"
> +
> + ".section\t__ex_table,\"a\"\n\t"
> + STR(PTR) "\t1b, 3b\n\t"
> + ".previous\n"
> +
> + : [old] "=&r" (old), [faulted] "=r" (faulted)
> + : [parent] "r" (parent)
> + : "memory"
> + );
> +
> + if (unlikely(faulted)) {
> + ftrace_graph_stop();
> + WARN_ON(1);

See, this is how we kill the tracing.

> + return;
> + }
> +
> + /* The argument *parent only work for leaf function, we need to check
> + * whether the function is leaf, if not, we need to get the real stack
> + * address which stored it.
> + *
> + * and here, we must stop tracing before calling probe_kernel_read().
> + * after calling it, restart tracing. otherwise, it will hang there.*/
> + tracing_stop();

Ah, here you stop tracing. I still prefer to use a direct asm. This has
a little overhead.

Also, this completely negates the above asm, which basically gets the
parent the "x86" way.

> + parent =
> + (unsigned long *)ftrace_get_parent_addr(self_addr, old,
> + (unsigned long)parent, fp);
> + tracing_start();
> +
> + if (unlikely(atomic_read(&current->tracing_graph_pause)))
> + return;
> +
> + /*
> + * Protect against fault, even if it shouldn't
> + * happen. This tool is too much intrusive to
> + * ignore such a protection.
> + *
> + * *parent = return_hooker;
> + */
> + asm volatile (
> + "1: " STR(PTR_S) " %[return_hooker], 0(%[parent])\n"
> + " li %[faulted], 0\n"
> + "2:\n"
> +
> + ".section .fixup, \"ax\"\n"
> + "3: li %[faulted], 1\n"
> + " j 2b\n"
> + ".previous\n"
> +
> + ".section\t__ex_table,\"a\"\n\t"
> + STR(PTR) "\t1b, 3b\n\t"
> + ".previous\n"
> +
> + : [faulted] "=r" (faulted)
> + : [parent] "r" (parent), [return_hooker] "r" (return_hooker)
> + : "memory"
> + );

Hmm, the above should only be done for non leaf functions.

> +
> + if (unlikely(faulted)) {
> + ftrace_graph_stop();
> + WARN_ON(1);
> + return;
> + }
> +
> + if (ftrace_push_return_trace(old, self_addr, &trace.depth, fp) ==
> + -EBUSY) {
> + *parent = old;

And this fails for leaf functions too.

> + return;
> + }
> +
> + trace.func = self_addr;
> +
> + /* Only trace if the calling function expects to */
> + if (!ftrace_graph_entry(&trace)) {
> + current->curr_ret_stack--;
> + *parent = old;

ditto

> + }
> +}
> +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
> diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S
> index 30637e6..356e81c 100644
> --- a/arch/mips/kernel/mcount.S
> +++ b/arch/mips/kernel/mcount.S
> @@ -89,6 +89,14 @@ ftrace_call:
> nop
>
> MCOUNT_RESTORE_REGS
> +
> +#ifdef CONFIG_FUNCTION_GRAPH_TRACER
> + .globl ftrace_graph_call
> +ftrace_graph_call:
> + j ftrace_stub
> + nop
> +#endif
> +
> .globl ftrace_stub
> ftrace_stub:
> RETURN_BACK
> @@ -106,7 +114,15 @@ NESTED(_mcount, PT_SIZE, ra)
> PTR_L t1, ftrace_trace_function /* please don't use t1 later, safe? */
> bne t0, t1, static_trace
> nop
> -
> +#ifdef CONFIG_FUNCTION_GRAPH_TRACER
> + PTR_L t2, ftrace_graph_return
> + bne t0, t2, ftrace_graph_caller
> + nop
> + PTR_LA t0, ftrace_graph_entry_stub
> + PTR_L t2, ftrace_graph_entry
> + bne t0, t2, ftrace_graph_caller
> + nop
> +#endif
> j ftrace_stub
> nop
>
> @@ -125,5 +141,42 @@ ftrace_stub:
>
> #endif /* ! CONFIG_DYNAMIC_FTRACE */
>
> +#ifdef CONFIG_FUNCTION_GRAPH_TRACER
> +
> +NESTED(ftrace_graph_caller, PT_SIZE, ra)
> + MCOUNT_SAVE_REGS
> +
> + PTR_LA a0, PT_R1(sp) /* arg1: &AT -> a0 */

Ah! You load the address of the stack you stored the ra with!

Good idea. I guess the leaf function update will work there too!

> + move a1, ra /* arg2: next ip, selfaddr */
> + PTR_SUBU a1, MCOUNT_INSN_SIZE
> + move a2, fp /* arg3: frame pointer */
> + jal prepare_ftrace_return
> + nop
> +
> + MCOUNT_RESTORE_REGS
> + RETURN_BACK
> + END(ftrace_graph_caller)
> +
> + .align 2
> + .globl return_to_handler
> +return_to_handler:
> + PTR_SUBU sp, PT_SIZE
> + PTR_S v0, PT_R2(sp)
> + PTR_S v1, PT_R3(sp)
> +
> + jal ftrace_return_to_handler
> + nop
> +
> + /* restore the real parent address: v0 -> ra */
> + move ra, v0
> +
> + PTR_L v0, PT_R2(sp)
> + PTR_L v1, PT_R3(sp)
> + PTR_ADDIU sp, PT_SIZE
> +
> + jr ra
> + nop
> +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
> +
> .set at
> .set reorder
> diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
> index 162b299..f25df73 100644
> --- a/arch/mips/kernel/vmlinux.lds.S
> +++ b/arch/mips/kernel/vmlinux.lds.S
> @@ -46,6 +46,7 @@ SECTIONS
> SCHED_TEXT
> LOCK_TEXT
> KPROBES_TEXT
> + IRQENTRY_TEXT

This looks like it should be in a separate patch. I don't see where you
explain this?

-- Steve

> *(.text.*)
> *(.fixup)
> *(.gnu.warning)



\
 
 \ /
  Last update: 2009-10-21 18:15    [from the cache]
©2003-2011 Jasper Spaans