lkml.org 
[lkml]   [2009]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: uvcvideo causes ehci_hcd to halt
Alan Stern wrote On 13-10-2009 17:53:
> Can you add a dump_stack() call just after the ehci_err() line in
> drivers/usb/host/ehci-hcd.c:handshake_on_error_set_halt()? It should
> provide some clues.
>
> At the same time (i.e., during the same test) you should collect a
> usbmon trace.
>
> Alan Stern
>

Hi. First the backtrace:

[ 149.510272] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0203)
[ 149.515017] input: BisonCam, NB Pro as
/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input10
[ 149.515588] usbcore: registered new interface driver uvcvideo
[ 149.516247] USB Video Class driver (v0.1.0)
[ 149.658012] Pid: 1137, comm: hald-probe-vide Tainted: G C
2.6.31.4-128 #2
[ 149.658012] Call Trace:
[ 149.658012] [<c0373f62>] handshake_on_error_set_halt+0x36/0x65
[ 149.658012] [<c0374073>] enable_periodic+0x32/0x72
[ 149.658012] [<c03741c9>] qh_link_periodic+0x116/0x11e
[ 149.658012] [<c0374665>] qh_schedule+0x120/0x12c
[ 149.658012] [<c03775d0>] intr_submit+0x8c/0x124
[ 149.658012] [<c0377d2a>] ehci_urb_enqueue+0x7a/0xa5
[ 149.658012] [<c036965f>] usb_hcd_submit_urb+0xbb/0x13c
[ 149.658012] [<c0369b1e>] usb_submit_urb+0x1f1/0x20d
[ 149.658012] [<f854aaff>] uvc_status_start+0x18/0x1a [uvcvideo]
[ 149.658012] [<f8546e23>] uvc_v4l2_open+0x8a/0xcf [uvcvideo]
[ 149.658012] [<f7c3d74a>] v4l2_open+0x68/0x7c [videodev]
[ 149.658012] [<c01c648e>] chrdev_open+0x125/0x13c
[ 149.658012] [<c01c28a9>] __dentry_open+0x119/0x207
[ 149.658012] [<c01c2a31>] nameidata_to_filp+0x2c/0x43
[ 149.658012] [<c01c6369>] ? chrdev_open+0x0/0x13c
[ 149.658012] [<c01ccc28>] do_filp_open+0x3e5/0x741
[ 149.658012] [<c01ccfe9>] ? getname+0x20/0xb7
[ 149.658012] [<c01d4be8>] ? alloc_fd+0x55/0xbe
[ 149.658012] [<c01c2699>] do_sys_open+0x4a/0xe2
[ 149.658012] [<c0435527>] ? do_page_fault+0x2d6/0x304
[ 149.658012] [<c01c2773>] sys_open+0x1e/0x26
[ 149.658012] [<c0103214>] sysenter_do_call+0x12/0x28
[ 149.658012] ehci_hcd 0000:00:1d.7: force halt; handhake f7c66024
00004000 00000000 -> -110

And the usbmon trace during "modprobe uvcvideo" can be found at:

http://cekirdek.pardus.org.tr/~ozan/ivir/logs/usbmon.trace.bad

I also manage to not reproduce the problem so it's kinda racy. You can
find good/bad dmesg/usbmon traces at:

http://cekirdek.pardus.org.tr/~ozan/ivir/logs

Thanks,
Ozan Caglayan





\
 
 \ /
  Last update: 2009-10-14 10:19    [W:0.082 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site