lkml.org 
[lkml]   [2009]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: pci-express hotplug
Jens Axboe wrote:
> Hi,
>
> I'm trying to get pci-express hotplug working in a box here. I don't
> really care about the hotplug aspect, I just want the darn pci-e slots
> that are designated hotplug slots to actually WORK. When I load pciehp,
> I get:
>
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> pciehp 0000:00:05.0:pcie04: HPC vendor_id 8086 device_id 340c ss_vid 0 ss_did 0
> pciehp 0000:00:05.0:pcie04: service driver pciehp loaded
> Firmware did not grant requested _OSC control
> pciehp 0000:00:07.0:pcie04: HPC vendor_id 8086 device_id 340e ss_vid 0 ss_did 0
> pciehp 0000:00:07.0:pcie04: service driver pciehp loaded
> Firmware did not grant requested _OSC control
> pciehp 0000:80:07.0:pcie04: HPC vendor_id 8086 device_id 340e ss_vid 0 ss_did 0
> pciehp 0000:80:07.0:pcie04: service driver pciehp loaded
> pciehp 0000:80:09.0:pcie04: HPC vendor_id 8086 device_id 3410 ss_vid 0 ss_did 0
> pciehp 0000:80:09.0:pcie04: service driver pciehp loaded
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>
> and the devices in the hotplug slots stay off. Is this an ACPI/bios
> issue? How can I debug this?
>

Could you give me the result of "ls -lR /sys/bus/pci/slots/"
after loading pciehp?

Thanks,
Kenji Kaneshige




\
 
 \ /
  Last update: 2009-10-13 05:27    [W:0.201 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site