[lkml]   [2009]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 5/7] x86/PCI: print resources consistently with %pRt
On Fri, 2009-10-09 at 17:14 -0400, Len Brown wrote:
> > The message changes like this:
> >
> > -PCI: Failed to allocate to allocate 0x0-0x3fff from PCI IO for PCI Bus 0000:00
> > +pci_root PNP0A03:01: can't allocate [io 0x0000-0x3fff]
> >
> > I don't think changing "PCI IO" to "io" is really a problem. In fact,
> > strictly speaking, "PCI IO" is the wrong name for ioport_resource --
> > we're talking about a host bridge, and the upstream side is not PCI
> > at all.
> >
> > However, I do think it would be more useful to mention the fact that
> > we failed to allocate a *window*, e.g.,
> >
> > pci_root PNP0A03:00: can't allocate host bridge window [io 0x0000-0x3fff]
> >
> > I did consider keeping the PCI bus ("0000:00"), but I decided we
> > already have that information here:
> >
> > ACPI: PCI Root Bridge [PCI0] (0000:00)
> >
> > and it doesn't seem worthwhile to me to repeat the bus number in all
> > the host bridge-related messages. Right now, there's nothing to tie
> > the PCI0 to the PNP0A03:00 (and "PCI0" shouldn't be exposed to users
> > anyway), but someday when I finally convince Len to use dev_printk
> > in ACPI, it could look something like this:
> >
> > pci_root PNP0A03:00: PCI host bridge to pci_bus 0000:00
> The last time we looked at using dev_printk() in ACPI,
> it looked like the leading ACPI: would go away, and the
> concern was that would hinder, rather than help, people
> in reporting issues to the right place.
> I have no problem with using dev_printk() where it makes sense,
> but only if it makes the message more useful rather than
> less useful.

Yes, I'm sorry, that was kind of a low blow that didn't represent your
concerns fairly.

> BTW. I like the consistency provided by the series at hand.
> I assume that it will go through Jesse's, and for that,
> consider the relevant bits...
> Acked-by: Len Brown <>

Thanks. I'm planning to post an updated series soon. Joe Perches
suggested reducing the stack usage in vsprintf, so I'm working on that,
and I might add another message or two.


 \ /
  Last update: 2009-10-10 18:15    [W:0.056 / U:28.256 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site