Messages in this thread | | | Date | Fri, 9 Jan 2009 16:43:41 +0200 (EET) | From | "Ilpo Järvinen" <> | Subject | Re: PROBLEM: networking - port 80 not accessible on eth0 |
| |
Added netdev though this is unlikely to end up being dev related.
On Fri, 9 Jan 2009, Orgad Shaneh wrote:
> ---------- Forwarded message ---------- > From: Orgad Shaneh <orgads@gmail.com> > Date: Fri, Jan 9, 2009 at 8:20 AM > Subject: PROBLEM: networking - port 80 not accessible on eth0 > To: linux-kernel@vger.kernel.org > > > I have a "VIA Technologies, VIA Technologies, Inc. VT6102 [Rhine-II]" > NIC connected to an ECI B-FOCuS 270PR ADSL model. I used fedora since > version 5. On FC5 (using kernel 2.6.15) the modem functioned as a > router, and it worked fine. > > When I upgraded to FC6 (which was published with kernel 2.6.18) I > couldn't access any websites. I found out that I can access https, ftp > etc. but not http. I figured out that for some reason, port 80 was > blocked. When using VMWare with Windows, I could access websites. > > I configured the modem to be a bridge, and I'm connecting through > pppoe. This way it works. Anyway, although I can access websites on > ppp0, I cannot access the modem itself (for configuration), which is > on eth0 port 80. > > I attached a tcpdump when trying to connect to the modem (the same > applies for websites, when the modem is configured as a gateway): > > After trying some different distributions (fedora up to 9, ubuntu 8.04 > and 8.10), the problem remains. That's what leads me to the conclusion > that the problem is in the kernel.
Unlikely so, more likely the router is broken and some kernel TCP settings got changed in the newer kernels. I took a short look into the provided tcpdump and the modem negotiates tcp connection ok but then goes dead silent.
Your could try playing around with tcp_window_scaling sysctl, most likely the modem has some problem related to it.
-- i.
| |