lkml.org 
[lkml]   [2009]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: Can't allocate resources for PCI video card behind bridge
Date
On Thursday, January 8, 2009 11:56 am Rafael J. Wysocki wrote:
> Cc-ing linux-pci and Jesse.
>
> On Thursday 08 January 2009, Connor Behan wrote:
> > Hello, I am trying to use two video cards. One is the built in ATI Rage
> > Mobility M3 AGP card which drives the screen of my laptop (Thinkpad a22m
> > 2628-S1U if that matters), the other is the ATI Radeon X1550 PCI card in
> > the Thinkpad Dock II which is supposed to drive an external monitor.
> > X1550 is a PCI-E chipset but my card is a PCI card with an onboard PCI
> > to PCI-E bridge. I first tried this with kernel 2.6.27 as packaged by
> > Archlinux and got the following startup errors:
> >
> > pci 0000:00:04.0: BAR 7: can't allocate resource
> > pci 0000:00:04.0: BAR 8: can't allocate resource
> > pci 0000:00:04.0: BAR 9: can't allocate resource
> >
> > I've seen this problem discussed in the archives and couldn't find what
> > looked like a fix. I WAS able to fix this by loading dock, pci_slot,
> > pci_hotplug and acpiphp and appending pci=assign-busses. However since
> > then I have run a package update to kernel 2.6.27.10 and I am once again
> > getting the same problem even with the same modules and parameters. I
> > have since tried appending irqpoll, pci=bios, pci=routeirq and acpi=off
> > with no success. I have even rolled back my kernel to 2.6.27 (and the
> > headers and a few other packages) setup my system the way it was setup
> > before to the best of my knowledge but I still can't get the PCI card
> > working again. Another subtle change must be responsible.
> >
> > Certain PCI devices in the dock are working such as the Cardbus slots...
> > but I could care less about them... is there a way I could tell the
> > kernel to prioritize the video card and sacrifice Cardbus slots first if
> > it can't allocate enough resources? Also my lspci output shows a large
> > gap 01:00.0 to 06:00.0 so some part of my system must have expected
> > other devices in that range. When I had the video card working it was
> > 02:00.0. I have tried changing the four IRQ numbers in the BIOS but this
> > is pointless at best and sometimes causes my soundcard to be disabled.
> > My dmesg, lspci and (trimmed) kernel config are pasted:
> >
> > dmesg: http://pastebin.com/f3ae15a58
> > lspci: http://pastebin.com/f5d7dee6e
> > .config: http://pastebin.com/fb925760
> >
> > I'm hoping for a solution that doesn't require recompiling the kernel
> > but I definitely would if that's necessary. In any event I'll be much
> > more vigilant about system updates if I get this working again.
> > Thank-you very much for your time.

Can you post the output of lspci -vvv somewhere as well after trying 2.6.28?
It may be that we want the "don't allocate resources for transparent bridges"
patch after all:

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index ea979f2..586451c 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -467,8 +467,12 @@ void __ref pci_bus_size_bridges(struct pci_bus *bus)
}
}

- /* The root bus? */
- if (!bus->self)
+ /*
+ * We don't need to allocate PCI bridging windows
+ * for a root bus (everything bridged) or for a
+ * transparent one.
+ */
+ if (!bus->self || bus->self->transparent)
return;

switch (bus->self->class >> 8) {

Since in your case it looks like it's incorrectly causing some of your other
resources to be disabled:

pnp 00:02: io resource (0x22-0x22) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:02: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:02: io resource (0xb2-0xb3) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:0a: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
Sorry but you might have to build a few kernels to help us fix this one. :)

Thanks,
--
Jesse Barnes, Intel Open Source Technology Center


\
 
 \ /
  Last update: 2009-01-08 21:29    [W:1.428 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site