lkml.org 
[lkml]   [2009]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b
On Wed, Jan 7, 2009 at 8:48 AM, Pekka Enberg <penberg@cs.helsinki.fi> wrote:
> On Wed, Jan 7, 2009 at 2:12 AM, Justin P. Mattock
> <justinmattock@gmail.com> wrote:
>> With pulling git today I'm unable to shut the machine down completely.
>> (the system just sits there with the message on the screen);
>>
>> * will now halt
>> [ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b
>
> That looks like use-after-free in __stop_machine() so lets cc Rusty.
> If you want, you can convert the oops location into human-readable
> form. Just search for "GDB" in Documentation/BUG-HUNTING for
> instructions how to do that. And don't forget to send your .config.
>
>> [ 286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3
>> [ 286.550598] Oops: 0002 [#1] SMP
>> [ 286.552206] last sysfs file: /sys/block/sda/removeable
>> [ 286.553844] Modules linked in: hidp radeon drm agpgart btusb rfcomm bnep
>> sco l2cap bluetooth fan battery container ipt_LOG xt_limit xt_tcpudp
>> xt_state ipt_addrtype nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_nat
>> nf_conntrack_ftp ipmi_watchdog ipmi_msghandler uvcvideo isight_firmware
>> uinput arpt_mangle arptable_filter arp_tables nf_conntrack_ipv4 nf_conntrack
>> nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables x_tables coretemp
>> eeprom acpi_cpufreq cpufreq_powersave cpufreq_performance cpufreq_ondemand
>> cpufreq_conservative appletouch snd_had_codec_idt ohci1394 ehci_hcd
>> snd_hda_intel snd_hda_codec thermal ath9k uhci_hcd ieee1394 joydev pata_acpi
>> snd_hwdep snd_pcm snd_page_alloc video ac button processor applesmc evdev
>> [ 286.560580]
>> [ 286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5 #1)
>> MacBookPro2,2
>> [ 286.560580] EIP: 0060:[<c0150ca4>] EFLAGS: 00010293 CPU: 0
>> [ 286.560580] EIP: is at __stop_machine+0x88/0xe3
>> [ 286.560580] EAX: 6b6b6b6b EBX: 00000000 ECX: 6b6b6b6b EDX: 00000000
>> [ 286.560580] ESI: c054abe0 EDI: c03d03a4 EBP: f1a29e54 ESP: f1a29e44
>> [ 286.560580] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>> [ 286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30
>> task.ti=f1a28000)
>> [ 286.560580] Stack:
>> [ 286.560580] f1a29e60 c054abe0 00000001 00000010 f1a29e7c c03d04e4
>> ffffffea 00000010
>> [ 286.560580] 00000001 00000003 00000022 00000001 4321fedc c054abe0
>> f1a29e94 c012a57e
>> [ 286.560580] 00000000 ffffffff 4321fedc 28121969 f1a29e9c c01360c0
>> f1a29fb0 c0136301
>> [ 286.560580] Call Trace:
>> [ 286.560580] [<c03d04e4>] ? _cpu_down+0x10f/0x234
>> [ 286.560580] [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc
>> [ 286.560580] [<c01360c0>] ? kernel_poweroff+0x22/0x39
>> [ 286.560580] [<c0136301>] ? sys_reboot+0xde/0x14c
>> [ 286.560580] [<c01331b2>] ? complete_signal+0x179/0x191
>> [ 286.560580] [<c0133396>] ? send_signal+0x1cc/0x1e1
>> [ 286.560580] [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c
>> [ 286.560580] [<c0133b65>] ? group_send_signal_info+0x58/0x61
>> [ 286.560580] [<c0133b9e>] ? kill_pid_info+0x30/0x3a
>> [ 286.560580] [<c0133d49>] ? sys_kill+0x75/0x13a
>> [ 286.560580] [<c01a06cb>] ? mntput_no_expire+ox1f/0x101
>> [ 286.560580] [<c019b3b3>] ? dput+0x1e/0x105
>> [ 286.560580] [<c018ef87>] ? __fput+0x150/0x158
>> [ 286.560580] [<c0157abf>] ? audit_syscall_entry+0x137/0x159
>> [ 286.560580] [<c010329f>] ? sysenter_do_call+0x12/0x34
>> [ 286.560580] Code: c7 05 10 06 62 c0 00 00 00 00 a3 f4 05 62 c0 c7 05 ec
>> 05 62 c0 01 00 00 00 83 cb ff eb 2d a1 1c 06 62 c0 f7 d0 8b 0c 98 8d 41 04
>> <c7> 01 00 00 00 00 89 41 04 89 41 08 c7 41 0c ff 0c 15 c0 89 d8
>> [ 286.560580] EIP: [<c0150ca4>] __stop_machine+0x88/0xe3 SS:ESP
>> 0068:f1a29e44
>> [ 286.639215] ---[ end trace 5b080c1ab14203ae ] ---
>> Segmentation fault
>>
>> after this message appears, if I hold down the start button
>> the system shuts off after a few seconds.
>> (BTW hopefully the number are correct,
>> manually writing this down, is a bit of a pain);

scripts/decodecode gives us:

0: c7 05 10 06 62 c0 00 movl $0x0,0xc0620610
7: 00 00 00
a: a3 f4 05 62 c0 mov %eax,0xc06205f4
f: c7 05 ec 05 62 c0 01 movl $0x1,0xc06205ec
16: 00 00 00
19: 83 cb ff or $0xffffffff,%ebx
1c: eb 2d jmp 0x4b
1e: a1 1c 06 62 c0 mov 0xc062061c,%eax
23: f7 d0 not %eax
25: 8b 0c 98 mov (%eax,%ebx,4),%ecx
28: 8d 41 04 lea 0x4(%ecx),%eax
2b: c7 01 00 00 00 00 movl $0x0,(%ecx)
31: 89 41 04 mov %eax,0x4(%ecx)
34: 89 41 08 mov %eax,0x8(%ecx)
37: c7 41 0c ff 0c 15 c0 movl $0xc0150cff,0xc(%ecx)
3e: 89 d8 mov %ebx,%eax
0: c7 01 00 00 00 00 movl $0x0,(%ecx) <-- oops
6: 89 41 04 mov %eax,0x4(%ecx)
9: 89 41 08 mov %eax,0x8(%ecx)
c: c7 41 0c ff 0c 15 c0 movl $0xc0150cff,0xc(%ecx)
13: 89 d8 mov %ebx,%eax

objdump -S -d kernel/stop_machine.o looks like this on my machine:

/* Schedule the stop_cpu work on all cpus: hold this CPU so one
* doesn't hit this CPU until we're ready. */
get_cpu();
for_each_online_cpu(i) {
sm_work = percpu_ptr(stop_machine_work, i);
INIT_WORK(sm_work, stop_cpu);
8b: c7 01 00 00 00 00 movl $0x0,(%ecx)
91: c7 41 0c e0 00 00 00 movl $0xe0,0xc(%ecx)

where

#define INIT_WORK(_work, _func) \
do { \
(_work)->data = (atomic_long_t) WORK_DATA_INIT(); \

and offset of ->data is zero and WORK_DATA_INIT() expands to
ATOMIC_LONG_INIT(0) so looks to me like 'sm_work' is used after it has
been free'd. Perhaps stop_machine_destroy() was called before or in
parallel to __stop_machine()? So lets cc Heiko as well.

Pekka


\
 
 \ /
  Last update: 2009-01-07 09:33    [W:0.059 / U:1.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site